FK Bearing CM14M Male Rod End, Metric 14mm Bore x M14 X 2.0 RH Thread

FK Bearing CM14M Male Rod End, Metric 14mm

Metric 2 Piece metal to metal male rod end. Ball: 52100 Steel - Heat Treated - Hard Chrome PlatedBody: Low Carbon Steel - Zinc Plated - Chromate Heat TreatedNote: Most of these rod ends can be made with grease fittings and/or a PTFE linerB Dia (mm): 14 D Dia (mm): 34.75 W Width (mm): 19 T Width (mm): 12.25 Ball Dia (mm): 25.4 A Length (mm): 60 N Thread (mm): M14 X 2.0 C Length (mm): 36 Misalignment Angle: 30 Ult. Static Radial Load (Newton): 35214 Approx. Weight (grams): 118PTFE Liner: No

  • Brand: FK Bearings
  • ASIN: B072DVXT8H
  • UPC: 800199191400

FK Bearing CF14M Female Rod End, Metric 14mm Bore x M14 X 2.0 RH Thread

FK Bearing CF14M Female Rod End, Metric 14mm

Metric 2 Piece metal to metal female rod end. Ball: 52100 Steel - Heat Treated - Hard Chrome PlatedBody: Low Carbon Steel - Zinc Plated - Chromate Heat TreatedNote: Most of these rod ends can be made with grease fittings and/or a PTFE linerB Dia (mm): 14 D Dia (mm): 34.75 W Width (mm): 19 T Width (mm): 12.25 Ball Dia (mm): 25.4 A Length (mm): 57 N Thread (mm): M14 X 2.0 C Length (mm): 27 E Diameter (mm): 25 F Flat (mm): 22 Misalignment Angle: 30Ult. Static Radial Load (Newton): 35214 Approx. Weight (grams): 160 PTFE Liner: No

  • Brand: FK Bearings
  • ASIN: B072NZXSQM
  • UPC: 800199131406

FK Bearing SJNL14M Steel Jam Nut M14 x 2.0 Left Hand Thread

FK Bearing SJNL14M Steel Jam Nut M14 x

FK Rod Ends Metric Steel Jam Nuts available for right and left hand in 5mm-20mm sizes.

  • Brand: FK Bearings
  • ASIN: B07115BHWK
  • UPC: 800199981407

FAG 6007-C3 Deep Groove Ball Bearing, Single Row, Open, Steel Cage, C3 Clearance, Metric, 35mm ID, 62mm OD, 14 mm Wide 13000rpm Maximum Rotational Speed, 2290lbf Static Load Capacity, 3570lbf Dynamic Load Capacity

FAG 6007-C3 Deep Groove Ball Bearing, Single Row,

This FAG Very Light 6000 Series single row deep groove ball bearing with a sheet steel cage supports radial loads and axial loads in both directions. It is also suitable for high speed applications. This bearing has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. This bearing is rated "Very Light," making it applicable for use in limited space applications where shaft sizes are large and the loads are not substantial, and it can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and balls are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The open design makes it easy to lubricate the bearing in place. This deep groove ball bearing is for use in various applications such as transmissions, motors, pumps, bicycles, and inline skates, among others. Spe...

  • Brand: FAG Bearings
  • ASIN: B006314X3U

FK Bearing CML14M Male Rod End, Metric 14mm Bore x M14 X 2.0 LH Thread

FK Bearing CML14M Male Rod End, Metric 14mm

Metric 2 Piece metal to metal male rod end. Ball: 52100 Steel - Heat Treated - Hard Chrome PlatedBody: Low Carbon Steel - Zinc Plated - Chromate Heat TreatedNote: Most of these rod ends can be made with grease fittings and/or a PTFE linerB Dia (mm): 14 D Dia (mm): 34.75 W Width (mm): 19 T Width (mm): 12.25 Ball Dia (mm): 25.4 A Length (mm): 60 N Thread (mm): M14 X 2.0 C Length (mm): 36 Misalignment Angle: 30 Ult. Static Radial Load (Newton): 35214 Approx. Weight (grams): 118PTFE Liner: No

  • Brand: FK Bearings
  • ASIN: B071RLN32N
  • UPC: 800199201406

HanYan 14mm × 1.25 Metric HSS Right Hand Taps and Spark Plug Taps 14×1.25mm Pitch (M14×1.25)

HanYan 14mm × 1.25 Metric HSS Right Hand

Thread Taps M14 x 1.25

  • Brand: HanYan
  • ASIN: B071GJCGMZ
  • UPC: 603432468150

VIM Tools Triple Square Serrated Stubby 11 Piece XZN Driver Set 3/8 Drive 4MM 5MM 6MM 7MM 8MM 9MM 10MM 12MM 14MM 16MM

VIM Tools Triple Square Serrated Stubby 11 Piece

WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: VIM Tools
  • ASIN: B00XHYH48M
  • UPC: 785971260430

Capri Tools XZN Triple Square Spline Bit Socket Set, Metric, 10-Piece

Capri Tools XZN Triple Square Spline Bit Socket

The XZN/Triple Square bits in this set are made from heat-treated S2 steel alloy to withstand long-term use, the sockets are composed of Chrome-Vanadium to provide optimal strength and durability. The pieces also have a chrome plating to prevent rusting and corrosion. This set comes with a convenient blow-molded storage box for portability and protection. These are perfect for use with breaker bars, torque wrenches and ratchets (not for use with impact tools). They are compatible with most European vehicles. This set meets and exceeds ANSI standards and comes with a lifetime replacement guarantee.

  • Color: Silver
  • Brand: Capri Tools
  • ASIN: B007UQLR9U
  • UPC: 886352300308

INA 81109TN Cylindrical Roller Thrust Bearing, Polyamide Nylon Cage, Open End, Metric, 45mm ID, 65mm OD, 14mm Width, 5000rpm Maximum Rotational Speed

INA 81109TN Cylindrical Roller Thrust Bearing, Polyamide Nylon

This INA cylindrical roller thrust bearing with a polyamide nylon cage is suitable for applications that support axial loads in one direction. The polyamide nylon cage is lightweight and produces less noise than brass cages. It has an open-end design, allowing lubrication to be applied in place. This bearing uses metric unit measurements for industry consistency and interchangeability and meets quality assurance specification s Deutsches Institut für Normung (DIN) 722/ International Organization for Standardization (ISO) 104 for roller thrust bearing boundary dimensions. Cylindrical roller thrust bearings are used in applications where high axial loads are present, such as automotive transmissions, material handling equipment, and lifting mechanisms, among others. Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. Cylindrical roller thrust bearings are suitable for applications that are required to support heavy axial loads and are used when thrust ball bearings or thrust needle bearings have insufficient load-carrying capacity. They are not suitable for transmitting radial loads. Roll...

  • Brand: INA
  • ASIN: B007D2N4G0
  • UPC: 035373019250

14mm Chrome Steel Ball Bearings G25-2 Bearings

14mm Chrome Steel Ball Bearings G25-2

Standard Diameter: .5512 InchesMetric Diameter: 14mmGrade: 25Material: AISI 52100 Chromium SteelBall Weight (each): .3963 Ounces / 11.236 GramsChrome steel balls offer the precise geometry and fine surface finish that makes them especially useful for bicycles, casters, drawer slides, door locks and many other applications.

  • Brand: BC Precision
  • ASIN: B075RN7CRH
  • UPC: 688938516642

TIME-SERT M14 X 1.50 Metric Thread Repair Kit 1415

TIME-SERT M14 X 1.50 Metric Thread Repair Kit

Time-Sert Metric Kit M14x1.5 Provided Insert length is 17.8 metric. KIT CONTAINS: Drill, Counterbore, Tap, Installation Driver, (5) Steel Inserts.

  • Brand: TIME-SERT
  • ASIN: B001ZS7WUW
  • UPC: 845617001732

XGao 17pcs Auto Bearing Race Seal Driver Disc Install Tool Master Set Axle Bushing with Carrying Case 3 Drivers Handles 14 Adapters Collar Master Universal Aluminum Kit for Wheel Bearing (Silver)

XGao 17pcs Auto Bearing Race Seal Driver Disc

Features:    【APPLICABLE】This kit makes it easy to insert wheel bearing races and seals without damage to the race and axle housing. Also useful for driving small bushes.Suitable for cars, motorbikes or others that have bearings or seals.    【MATERIAL】Aluminum construction for strength and durability as well as rust resisting.    【INCLUDING】 3 sizes of drivers/handles: small (4-1/2" long x 7/16" diameter), medium (5-1/2" long x 5/8" diameter) , and large (6-1/4" long x 7/8" diameter), with knurled surface finish for extra grip when using. 14 Adapters (Small end diameter x Large end diameter) 10x12mm, 12x14mm, 14x16mm, 15x17mm, 16x18mm, 18x20mm, 20x22mm, 22x24mm, 25x27mm, 28x30mm, 30x34mm, 32x36mm, 35x40mm, 38x42mm.    【EASY STORAGE】Comes with a blow molded case for safe & easy transport and storage.Specifications:-It Is Only Suitable For Small Bearings With A Light Press Fit. E.G. Bicycle Wheels, Alternator, Washing Machine, Electric Motors Etc.-The Tool Is Not An Extractor, Just An Installer. Another Tool Is Needed For Bearing Removal-This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.-Fits most standard bushing/wheel bearings.-Simply turn discs over to drive seals.Package in...

  • Color: silver
  • Brand: XGao
  • ASIN: B07SC23TQM
  • UPC: 759550858097

WJB 6303-2RS Deep Groove Ball Bearing, Double Sealed, Metric, 17mm ID, 47mm OD, 14mm Width, 3050lbf Dynamic Load Capacity, 1470lbf Static Load Capacity

WJB 6303-2RS Deep Groove Ball Bearing, Double Sealed,

The WJB 6300-2RS series deep groove ball bearing is a double-sealed ball bearing and has a single-row deep-groove geometry for high speeds and supporting both radial and axial loads. Seals on both sides of the bearing fasten to the outside ring and extend over the rolling elements to make contact with the inside ring, keeping out contaminants such as dirt and grime. The seals also hold in a high-quality lubricant applied at manufacture that will last the entire lifetime of the bearing, making it maintenance free. This 6300-2RS series deep groove double-sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant ...

  • Brand: WJB
  • ASIN: B007HSCN1M

8MILEAKE Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

8MILEAKE Blind Inner Bearing Puller Hole Remover Extractor

For both the Professional and DIY use. Split collet type Blind / Internal /Bearing Puller Collets are made from chrome molybdenum steel Turn and they expand to grip the inner bearing race.

  • Brand: 8MILELAKE
  • ASIN: B0798GS916
  • UPC: 615200836061

SABLUE 8mm thru 24mm Double Ended Cone Wrench Spanner Tool Kit Bicycle Bike Cycling 10PCS Multi Set lug nut allen (A01)

SABLUE 8mm thru 24mm Double Ended Cone Wrench

SABLUE Double Ended 8mm thru 24mm Cone Wrench Bicycle Tool Kit Spanner Bike Cycling Multi Set  Specifications: 1. Double Ended 8mm thru 24mm Cone Wrench 2. Made of thin steel 3. Nickel Plated 4. Heat treated  Package includes: 1x 8mm and 10mm1x 10mm and 12mm1x 10mm and 13mm1x 12mm and 14mm1x 13mm and 15mm1x 13mm and 17mm1x 14mm and 17mm1x 16mm and 18mm1x 17mm and 19mm1x 22mm and 24mm1x Drawstring Bag

  • Brand: SABLUE
  • ASIN: B0748FHZVJ
Similar 14mm Metric Bearings Results