New 9 Inch Nodular Iron Carrier Housing, 3.062 Inch Caps

New 9 Inch Nodular Iron Carrier Housing, 3.062

Our brand new, cast iron housing is built to take the abuse of the street, strip or track without the fear of breaking. Case has forged caps and extra reinforcement where it's needed most. Most stock differentials use the 3.062" o.d. bearings # TLM603049 w/ 1.781" i/d. New heavy duty cast iron pinion support are sold separately.Heavy duty nodular iron caseForged 3.062" diameter bearing caps Accepts OEM and aftermarket Fits Ford 9" pinion supports

  • Brand: Speedway Motors
  • ASIN: B01MYCGDYD

Ford 9 Inch Posi Traction 3rd Member Assembly, 31 Spl, 3.89

Ford 9 Inch Posi Traction 3rd Member Assembly,

As featured on Classic Truck's Week to Wicked. Watch the transformation here! If you're looking for a complete third member for your Fits Ford 9-inch rear end housing, but want the added performance of a limited slip differential, Speedway Motors now offers you a 9" Fits Ford street 3rd member for your street rod, muscle car or truck. We start with a new carrier housing and then install bearings, seals, a heavy duty "Daytona" pinion support, a 1310-series yoke, and your choice of ring-and-pinion ratios. The 1310-series yoke is the correct size for many Fits Ford applications with cups 1-1/16 inch in outside diameter and a span of 3-7/32 inch across. These Fits Ford 9 inch third member assemblies feature a Richmond Powertrax Grip Pro limited slip differential available in 28 or 31 spline axle shaft configurations. This helical gear differential is perfect for light-to-medium weight street vehicles where one wants posi-action without the adverse handling effects or noise of a full locker. Because there are no friction plates, there is no friction modifier additive necessary. All third members are assembled by our team of professionals and are delivered to you in a handy plastic carrying case, for an overall value that can't be beat Available in your choice of 3.00, 3.25, 3.50, 3.7...

  • Brand: Speedway Motors
  • ASIN: B075NR69ZD

Vertical Load Pumpkin Case - Red

Vertical Load Pumpkin Case -

Vertical load storage box for 3rd member with bolt down lid, non-stacking case design.

  • Brand: Speedway Motors
  • ASIN: B076VQXJ72

Center Section/Third Member for Ford 8" - Assembled - Trac Loc Differential - 28 Spline ... (3.55)

Center Section/Third Member for Ford 8" - Assembled

Fully Assembled 8" Ford Center Section / Third Member assembled with a Stock Case, Standard Pinion Support, New 28 Spline Trac-Lock Posi, New Motive Performance Gears, & New Timken USA Bearings.

  • Brand: QP
  • ASIN: B01MUQ790O
  • UPC: 650181397033

Jaz Products 700-009-01 9" Horizontal Third Member Case

Jaz Products 700-009-01 9" Horizontal Third Member

JAZ Products 700-009-01 Ford 9in 3RD Member Case - Horizontal. Product Dimension (LxWxH): 19.5x14x9.5.

  • Brand: Jaz
  • ASIN: B002RL3ECG
  • UPC: 705163480668

Toyota 8" High Pinion Rev D/O 3rd Member Case, Incl Adjusters & Locks

Toyota 8" High Pinion Rev D/O 3rd Member

Toyota 8" High Pinion Rev D/O 3rd Member Case, Incl Adjusters & Locks

  • Brand: Nitro Gear and Axle
  • ASIN: B00L2IGHA6

Center Section/Third Member for Ford 9" - Assembled - Trac Loc Differential - 28 Spline (3.89)

Center Section/Third Member for Ford 9" - Assembled

Fully Assembled 9" Ford Center Section / Third Member assembled with a Stock Case, Standard Pinion Support, New 28 Spline Trac-Lock Posi, New Motive Performance Gears, & New Timken USA Bearings.

  • Brand: QP
  • ASIN: B01MXMWPEE
  • UPC: 714983493208

COMPLETE 9" 3RD MEMBER, 31 SPLINE, GEAR SET, 3.70, CHUNK, PUMPKIN, RING AND PINION, SOUTHWEST SPEED, PART# 603-2223, COMPATIBLE WITH FORD REAR END

COMPLETE 9" 3RD MEMBER, 31 SPLINE, GEAR SET,

Southwest Speed 9" Ford Rear End Third Member with a 3.70 Ring & Pinion (SWS Part #603-2223). 9" Ford case is reconditioned and sold completely assembled with: New Lightweight 31 Spline Full Spool New Premium Ring & Pinion New Solid Shim Set New Bearings New Pinion Yoke 3rd Member Gasket Instructions Detailing Proper Break-In Procedure Features: Professionally set up with proper lash Premium ring & pinion is constructed from 9310 hi-nickel alloy Pinion is precision matched to ring gear Pinion yoke is 1310 series "short" yoke; Accepts 1310 series u-joints, which have 1 1/16" outside diameter cups and measure 3 7/32" wide to the outside of the cups. Shipped in heavy cardboard box with foam to prevent any damage in shipping; This box can be used to store the gear, but it will not hold up to heavy grease Check out our Ebay store for many other drivetrain parts, as well as other performance parts.

  • Brand: Southwest Speed
  • ASIN: B00L2OUIVO

Yukon Gear & Axle (YP DOTV6) Dropout Third Member Center Section for Toyota V6 Differential

Yukon Gear & Axle (YP DOTV6) Dropout Third

Performance parts and accessories from Yukon Gear and Axle. Quality tested and engineered for maximum durability.

  • Brand: Yukon Gear
  • ASIN: B0078UA4BU
  • UPC: 883584320951

Center Section/Third Member for Ford 9" - Assembled - Eaton Truetrac Differential - 31 Spline (3.50)

Center Section/Third Member for Ford 9" - Assembled

Fully Assembled 9" Ford Center Section / Third Member assembled with a Stock Case, Standard Pinion Support, New 31 Spline Eaton TruetracPosi, New Motive Performance Gears, & New Timken USA Bearings.

  • Brand: QP
  • ASIN: B07KGNJRW2
  • UPC: 650181399198

Center Section/Third Member for Ford 9" - Assembled - Trac Loc Differential - 31 Spline (3.50)

Center Section/Third Member for Ford 9" - Assembled

Fully Assembled 9" Ford Center Section / Third Member assembled with a Stock Case, Standard Pinion Support, New 31 Spline Trac-Lock Posi, New Motive Performance Gears, & New Timken USA Bearings.

  • Brand: QP
  • ASIN: B01MSNPA99
  • UPC: 714983493369

G2 Axle & Gear 66-2011CA G2 9" ford Aluminum 3rd Member Case

G2 Axle & Gear 66-2011CA G2 9" ford

G2 9 inch Ford aluminum 3rd member case. It is 3.250 carrier bearing bore for aftermarket differentials. It has Light Weight heat treated T6 aluminum, heavy duty support ribbing and billet steel spanner nuts. It also has improved pilot bearing support.

  • Brand: G2 Axle & Gear
  • ASIN: B004PH967C

Assembled Center Section for Ford 9" 31 Spline Eaton TruTrac Third Member Differential (3.89)

Assembled Center Section for Ford 9" 31 Spline

Fully Assembled 9" Ford Center Section / Third Member assembled with a New Yukon Nodular Iron Case, New Aluminum Daytona Pinion Support, New 31 Spline Eaton TrueTrac, New Motive Performance Gears, & New Timken USA Bearings. Includes New 1350 Billet Yoke & New U-Bolts

  • Brand: QP
  • ASIN: B01M26ZBFD
  • UPC: 714983494014

JEGS 60658 Third Member Assembly Stand for 9 in. Ford Differential

JEGS 60658 Third Member Assembly Stand for 9

Third Member Assembly Stand9" Ford Differential10.313" Front C/L6.625" Top to Bottom C/L1" Tube O.D.2" Upper Mount O.D.10 lbs.Zinc-Plated Steel

  • Brand: JEGS
  • ASIN: B07B52K1YT
  • UPC: 889944062516

Center Section/Third Member for Ford 9" - Assembled - Eaton Truetrac Differential - 28 Spline (4.11)

Center Section/Third Member for Ford 9" - Assembled

Fully Assembled 9" Ford Center Section / Third Member assembled with a Stock Case, Standard Pinion Support, New 28 Spline Eaton TruetracPosi, New Motive Performance Gears, & New Timken USA Bearings.

  • Brand: QP
  • ASIN: B07KGJRQX6
  • UPC: 650181399129
Similar 3rd Member Results