Traxxas 4686 Spur Gear 86T 48P (3pcs) Slash 2WD Rustler Stampede Bandit VXL XL-5

Traxxas 4686 Spur Gear 86T 48P (3pcs) Slash

Traxxas 86t 48p spur gears (set of 3) for Slash Rustler Stampede Bandit. Always keep one on hand!

  • Brand: Bobbyrc
  • ASIN: B0765Q251D
  • UPC: 605483100324

Hot Racing Hardened Steel Spur Gear 86t 48p, Silver: Traxxas, HRASTE886

Hot Racing Hardened Steel Spur Gear 86t 48p,

HOT-RACING STE886 Steel 86T 48P Spur Gear Slash Silver

  • Brand: Hot Racing
  • ASIN: B00XF8IR3Q
  • UPC: 797162312897

Slash 58034-2-86T Tooth Spur Gear amp 23T Pinion Gear Set 48P Traxxas

Slash 58034-2-86T Tooth Spur Gear amp 23T Pinion

Slash 58034 86T TOOTH SPUR GEAR /// 23T TOOTH PINION GEAR SET /// come as picture

  • Brand: Traxxas
  • ASIN: B073KT4Z7J
  • UPC: 650415922727

Traxxas 4686 Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Traxxas 4686 Spur gear, 86-tooth (48-pitch) (for models

Spur gear, 86-tooth, 48-pitch. Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications. Smaller gears will increase the speed of the vehicle while larger gears will increase the torque. (for models with Torque-Control slipper clutch) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • ASIN: B000HKH0TC
  • UPC: 734548775921

Team Losi Racing 86T 48P Kevlar Spur Gear: 22

Team Losi Racing 86T 48P Kevlar Spur Gear:

48p 86t para-aramid synthetic fiber Spur Gear: 22

  • Brand: Team Losi Racing
  • ASIN: B008OHI9O0
  • UPC: 605482073056

Buengna Hot Racing STE886 Hardened Steel Spur Gear (86t 48p)(Silver) - Traxxas

Buengna Hot Racing STE886 Hardened Steel Spur Gear

Hot Racing light weight hardened steel 86 tooth, 48 pitch spur gear for the Traxxas Bandit, Rustler, 2WD Slash, and 2WD Stampede vehiclesFEATURES: - CNC machined and lightened hardened steel construction- Replaces stock nylon spur gear- Black oxide coated gear for durability and corrosion resistance- Silver anodized countersunk aluminum washers- High strength hardwareYOU WILL RECEIVE: - One (1) 86 tooth 48 pitch spur gear- Three (3) mounting screws- Three (3) silver anodized countersunk washers- Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)SPECIFICATIONS: - Number of Teeth: 86- Gear Pitch: 48 pitch- Mounting Holes: 3- Tooth Face width: ~5mm COMMENTS: - Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. description revised by: SN July 19, 2017

  • Brand: Buengna
  • ASIN: B011426COA
  • UPC: 885311239611

Hot Racing Traxxas 2wd Rustler Slash Stampede 48p Aluminum 86t Spur Gear TE886H

Hot Racing Traxxas 2wd Rustler Slash Stampede 48p

Hot Racing light weight hard anodized aluminum 86t tooth, 48 pitch spur gear for the Traxxas Bandit, 2WD Slash, Rustler, and 2WD Stampede vehicles FEATURES: - CNC machined 6061-T6 aluminum construction - Replaces stock nylon spur gear - Hard anodized in light gunmetal color for durability and corrosion resistance - Silver anodized countersunk aluminum washers - High strength hardware YOU WILL RECEIVE: - One (1) 86t tooth 48 pitch spur gear - Three (3) mounting screws - Three (3) silver anodized countersunk washers - Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate) SPECIFICATIONS: - Number of Teeth: 86 - Gear Pitch: 48 pitch - Mounting Holes: 3 - Tooth Face width: ~5mm NOTE: - Use only with an aluminum pinion gear - Aluminum gears are softer than steel and are intended for speed performance. For ultimate durability consider our our steel gears - Check gear alignment and secure you motor before running the vehicle - Do not over tighten the slipper. Even metal gears may fail with a over tight slipper - Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC

  • Brand: Hot Racing
  • ASIN: B07MC5J664
  • UPC: 083745567816

Hot Racing SCP886H Aluminum Spur Gear (86t 48p) - Wraith Scx10 Ax10

Hot Racing SCP886H Aluminum Spur Gear (86t 48p)

Hot Racing 86 tooth, 48 pitch aluminum spur gear for the Axial Wraith, SCX10, and AX10 vehicles FEATURES: - CNC machined billet 6061-T6 aluminum construction- Direct replacement- Hard anodized in light gunmetal finish YOU WILL RECEIVE: - One (1) spur gear- One (1) Delrin bushing SPECIFICATIONS: - Teeth: 86- Pitch: 48- Face width: 5mm- Inside diameter: 5mmCOMMENTS: - Works on Hot Racing SCP50H01 and Stock AX10 Gear Hub- This will fit Red Cat Gen 7 stock gear hubdescription revised by: SN June 24, 2015

  • Brand: Hot Racing
  • ASIN: B0077S1Q10

Traxxas 1/10 Slash 2WD VXL 86T SPUR GEAR, SLIPPER CLUTCH, TWO PINIONS & COVER

Traxxas 1/10 Slash 2WD VXL 86T SPUR GEAR,

Traxxas 1/10 Slash 2WD VXL OBA (Model 5807)86T Spur Gear, Slipper Clutch, Pinion Gears, & CoverMSRP:34.00Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents.Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.Includes:Slipper Pressure Plate & Hub (Part # 5556)2 Ball Bearings - 5x11x4mm (Part # 5116)Clutch Rebuild Kit (Part # 5552X)Spur Gear - 86T 48P (Part # 4686)48P 23T Pinion Gear w/Set Screw - Steel (Part # 2423)Pinion Gear w/Set Screw - 28T 48P (Part # 4728)Dust Cover/Rubber Plug w/Screws (Part # 3792)This product is compatible with the following Model(s): Slash 2WD VXL

  • Brand: Traxxas
  • ASIN: B01M0DXJ2M
  • UPC: 768855100169

VATERRA Spur Gear, 86T, 48P (2)

VATERRA Spur Gear, 86T, 48P

Spur Gear, 86T, 48P (2)

  • Brand: VATERRA
  • ASIN: B00MHRZRO8
  • UPC: 792491239716

Losi 86T 48P Spur w/Drive Pulley: XXX-S LOSA3944

Losi 86T 48P Spur w/Drive Pulley: XXX-S

86T 48P Spur w/Drive Pulley: XXX-SLosiPart LOSA3944

  • Brand: Losi
  • ASIN: B0006O2C3S
  • UPC: 660132012335

TRAXXAS SPUR GEAR 4690 SPUR GEAR 90T 48P (3pcs) THESE ARE GOOD FOR THE SLASH, RUSTLER, STAMPEDE, BANDIT, SKULLY, BIGFOOT 2WD XL-5 TRUCKS...

TRAXXAS SPUR GEAR 4690 SPUR GEAR 90T 48P

r/c parts

  • Brand: Traxxas
  • ASIN: B075SJMKBK
  • UPC: 020334469007

Traxxas 4676 Spur Gear 76T 48P (3pcs) Slash 2WD Rustler Stampede Bandit VXL XL-5

Traxxas 4676 Spur Gear 76T 48P (3pcs) Slash

This is a NEW Genuine Traxxas 4676 Spur Gear 76T 48P (3pcs) Slash 2WD Rustler Stampede Bandit VXL XL-5 ///FEATURES: Nylon Construction ///Black in Color ///Package: 3x Spur Gear

  • Brand: BOBBYRC
  • ASIN: B07565GX6Z
  • UPC: 605483100195

Traxxas RUSTLER XL-5 SPUR GEAR / SLIPPER CLUTCH 90T 86T 16T 28T Pinion

Traxxas RUSTLER XL-5 SPUR GEAR / SLIPPER CLUTCH

Traxxas 1/10 Rustler XL-5 (Model 37054)Spur, Pinion Gears & Slipper ClutchMSRP:40.00IMPORTANT NOTE: The first image in this listing may picture parts that are not included. Please refer to subsiquent images and the product description for exact contents.Requires Assembly - This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.Includes:Dust Cover/Rubber Plug w/Screws (Part # 3792)Spur Gear - 90T 48P (Part # 4690)Spur Gear - 86T 48P (Part # 4686)Slipper Pressure Plate & Hub (Part # 5556)Clutch Rebuild Kit (Part # 5552X)2 Ball Bearings - 5x11x4mm (Part # 5116)6 Back Plate Screws - Hex Drive Cap Head (Part # 2554)48P 16T Pinion Gear w/Set Screw (Part # 2416)Pinion Gear w/Set Screw - 28T 48P (Part # 4728)This product is compatible with the following Model(s): Rustler XL-5

  • Brand: Traxxas
  • ASIN: B00GSVKOPQ
  • UPC: 885244190676

Traxxas 4690 Spur Gear 90T 48P (3pcs) Slash 2WD Rustler Stampede Bandit VXL XL-5

Traxxas 4690 Spur Gear 90T 48P (3pcs) Slash

FEATURES/// Nylon Construction Black in Color ///INCLUDES: Three (3)Spur Gears ///Fits: 1/10 Slash 2WD / Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL /////-

  • Brand: Bobbyrc
  • ASIN: B07565K8JB
  • UPC: 605483100201
Similar 86t 48p Spur Results