Gates B32 Hi-Power II Belt, B Section, B32 Size, 21/32" Width, 13/32" Height, 35.0" Belt Outside Circumference

Gates B32 Hi-Power II Belt, B Section, B32

This Gates Hi-Power II belt is a multipurpose power transmission V-belt for widespread applications. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Its concave sidewalls provide cord support and full contact with the sheave groove for equal loading and uniform wear. Hi-Power II belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt meets RMA oil and heat resistance standards and static conductivity requirements and is suitable for use in all industrial applications, including V-flat drives.V-belts, also called fan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. Thi...

  • Brand: Gates
  • ASIN: B00CJGHM3G
  • UPC: 072053205909

TB Woods BK3258 FHP Bored-to-size V-Belt Sheave, B Belt Section, 1 Groove, 5/8" Bore, Cast Iron, 3.35" OD, 7470 max rpm

TB Woods BK3258 FHP Bored-to-size V-Belt Sheave, B

This TB Woods bored-to-size V-belt sheave with a B belt section is made of cast iron and comes with one groove. It is a classical V-belt sheave that fits a variety of widely available, classical profile V-belts suitable for use in many existing power transmission drives. This pulley is made of cast iron for resistance to wear, corrosion, and galling. It has a B cross section and one groove for use with single belts. V-belt pulleys (sheaves) are used in a wide range of mechanical and electronic drives, including HVAC units, farm machinery, food processing equipment, and home appliances, among others.V-belt pulleys (sheaves) are the component in a power transmission drive that transmits power to the belt. Typically made of cast iron, the pulleys and the V-belts that loop around them match in form – wide (classical) or narrow, single or multi-grooved. V-belt pulleys are found in drive designs in the agriculture, textile, printing, mining, and office equipment industries.TB Wood's manufactures sheaves, V-belts, couplings, bushings, and other power transmission products. Founded in 1857, it is based in Chambersburg, PA.

  • Brand: TB Woods
  • ASIN: B003N17QC8
  • UPC: 698672130929

Browning B33 Super Gripbelt, B Belt Section, 21/32 x 7/16, 34.8 Pitch Length

Browning B33 Super Gripbelt, B Belt Section, 21/32

Browning, B33, V-Belt, 36 (in) Outside Length

  • Brand: Browning
  • ASIN: B003U1R1Z8
  • UPC: 662289037148

TB Woods 2BK2578 FHP Bored-to-size V-Belt Sheave, B Belt Section, 2 Grooves, 7/8" Bore, Cast Iron, 2.65" OD, 9440 max rpm

TB Woods 2BK2578 FHP Bored-to-size V-Belt Sheave, B

This TB Woods bored-to-size V-belt sheave with a B belt section is made of cast iron and comes with two grooves. It is a classical V-belt sheave that fits a variety of widely available, classical profile V-belts suitable for use in many existing power transmission drives. This pulley is made of cast iron for resistance to wear, corrosion, and galling. It has a B cross section and two grooves for use with multiple or banded belts. V-belt pulleys (sheaves) are used in a wide range of mechanical and electronic drives, including HVAC units, farm machinery, food processing equipment, and home appliances, among others.V-belt pulleys (sheaves) are the component in a power transmission drive that transmits power to the belt. Typically made of cast iron, the pulleys and the V-belts that loop around them match in form – wide (classical) or narrow, single or multi-grooved. V-belt pulleys are found in drive designs in the agriculture, textile, printing, mining, and office equipment industries.TB Wood's manufactures sheaves, V-belts, couplings, bushings, and other power transmission products. Founded in 1857, it is based in Chambersburg, PA.

  • Brand: TB Woods
  • ASIN: B003N17GNC
  • UPC: 698672150149

Gates B52 Hi-Power II Belt, B Section, B52 Size, 21/32" Width, 13/32" Height, 55.0" Belt Outside Circumference

Gates B52 Hi-Power II Belt, B Section, B52

This Gates Hi-Power II belt is a multipurpose power transmission V-belt for widespread applications. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Its concave sidewalls provide cord support and full contact with the sheave groove for equal loading and uniform wear. Hi-Power II belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt meets RMA oil and heat resistance standards and static conductivity requirements and is suitable for use in all industrial applications, including V-flat drives.V-belts, also called fan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. Thi...

  • Brand: Gates
  • ASIN: B00CJGI3JS
  • UPC: 072053206586

Gates B81 Hi-Power II Belt, B Section, B81 Size, 21/32" Width, 13/32" Height, 84.0" Belt Outside Circumference

Gates B81 Hi-Power II Belt, B Section, B81

This Gates Hi-Power II belt is a multipurpose power transmission V-belt for widespread applications. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Its concave sidewalls provide cord support and full contact with the sheave groove for equal loading and uniform wear. Hi-Power II belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt meets RMA oil and heat resistance standards and static conductivity requirements and is suitable for use in all industrial applications, including V-flat drives.V-belts, also called fan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. Thi...

  • Brand: Gates
  • ASIN: B00CJGIOS8
  • UPC: 072053207460

TB Woods BK140 FHP QT Bushed V-Belt Sheave, B Belt Section, 1 Groove, QT Bushing required, Cast Iron, 13.75" OD, 1820 max rpm

TB Woods BK140 FHP QT Bushed V-Belt Sheave,

This TB Woods QT bushed V-Belt sheave with a B belt section is made of cast iron and comes with one groove. It is a classical V-belt sheave that fits a variety of widely available, classical profile V-belts suitable for use in many existing power transmission drives. This pulley is made of cast iron for resistance to wear, corrosion, and galling. It has a B cross section and one groove for use with single belts. V-belt pulleys (sheaves) are used in a wide range of mechanical and electronic drives, including HVAC units, farm machinery, food processing equipment, and home appliances, among others.V-belt pulleys (sheaves) are the component in a power transmission drive that transmits power to the belt. Typically made of cast iron, the pulleys and the V-belts that loop around them match in form – wide (classical) or narrow, single or multi-grooved. V-belt pulleys are found in drive designs in the agriculture, textile, printing, mining, and office equipment industries.TB Wood's manufactures sheaves, V-belts, couplings, bushings, and other power transmission products. Founded in 1857, it is based in Chambersburg, PA.

  • Brand: TB Woods
  • ASIN: B003N17O8O
  • UPC: 698672200578

Browning B45 Super Gripbelt, B Belt Section, 21/32 x 7/16, 46.8 Pitch Length

Browning B45 Super Gripbelt, B Belt Section, 21/32

Browning, B45, V-Belt, 48 (in) Outside Length

  • Brand: Browning
  • ASIN: B003U1VU2S
  • UPC: 662289228942

Gates B116 Hi-Power II Belt, B Section, B116 Size, 21/32" Width, 13/32" Height, 119.0" Belt Outside Circumference

Gates B116 Hi-Power II Belt, B Section, B116

This Gates Hi-Power II belt is a multipurpose power transmission V-belt for widespread applications. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Its concave sidewalls provide cord support and full contact with the sheave groove for equal loading and uniform wear. Hi-Power II belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt meets RMA oil and heat resistance standards and static conductivity requirements and is suitable for use in all industrial applications, including V-flat drives.V-belts, also called fan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. Thi...

  • Brand: Gates
  • ASIN: B00CJGJGRG
  • UPC: 072053308716

Browning 1VP44X7/8 Variable Pitch Sheave, 1 Groove, Finished Bore, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt

Browning 1VP44X7/8 Variable Pitch Sheave, 1 Groove, Finished

7/8" bore, 4.15" outside diameter, cast iron. Pitch diameter for "3L" belts is 2.7 to 3.5 inches; "4L" or "A" belts is 3.0 to 4.0 inches; "5L" or "B" belts is 3.2 to 4.2 inches.

  • Brand: Browning
  • ASIN: B002E9CGM0
  • UPC: 662289104963
Similar A/b Belt Section Results