Linear Actuator Mounting Brackets

Linear Actuator Mounting

Designed to fit WindyNation's LIN-ACT1 Series Linear Actuators. WindyNations Linear Actuator mounting brackets are manufactured from 1018 carbon steel and are capable of holding a 350 pound (159kg) static load. The mounting brackets allow for the linear actuator to rotate 180 degrees, if necessary for your mounting application.

  • Brand: WindyNation
  • ASIN: B00P08V498
  • UPC: 617209854732

Progressive Automations Mounting Bracket for PA-17 Linear Actuators including pins

Progressive Automations Mounting Bracket for PA-17 Linear Actuators

Heavy Duty actuators can withstand up to 8000lbs of static force, you need a bracket that that can handle that type of weight and force. Our BRK-17 brackets have been rigorously test to withstand the types of forces that our heavy duty linear actuators can exert. The bracket is also designed to have a full 180 degree rotation, these work great for applications where you will be pushing at an angle. The price listed is for a single bracket. Most applications require two brackets (one for each mounting hole). Each mounting bracket comes with all required screws to attach to the actuator as well as to your application.

  • Brand: PROGRESSIVE AUTOMATIONS
  • ASIN: B00943OS2A
  • UPC: 639713211894

Progressive Automations Mounting Bracket for PA-14 Linear Actuators including pins

Progressive Automations Mounting Bracket for PA-14 Linear Actuators

These mounting brackets are designed to make the installation of the actuators much easier and will allow the rotation of almost 180 degrees. They are designed to fit onto the both ends of the linear actuator.

  • Brand: PROGRESSIVE AUTOMATIONS
  • ASIN: B006P591RW
  • UPC: 610563613137

TSINY Mounting Bracket Set for Linear Actuators Including Pins

TSINY Mounting Bracket Set for Linear Actuators Including

  • Brand: BBQ Driver
  • ASIN: B00ODUMFQU

Lenco Actuator Mounting Bracket, Universal, with Hardware,

Lenco Actuator Mounting Bracket, Universal, with

Actuator Mounting bracket, Universal, with HW, Mfg# len-15099-001, Universal actuator Mounting bracket Replacement kit (for 1 actuator). kit Incl: 15085-001 upper Mounting bracket W/gland seal, 50015-001 upper Mounting bracket W/seal 50014-001 lower Mounting bracket. All SS HW & Delrin pin

  • Brand: LENCO MARINE
  • ASIN: B0053HNW0K
  • UPC: 874847006118

2pcs Heavy Duty Steel Mounting Bracket for Linear Actuator Easy Installation

2pcs Heavy Duty Steel Mounting Bracket for Linear

Package:2 pieces of mounting brackets2 pieces of cotter pins2 pieces of mounting bolts

  • Brand: Fisters
  • ASIN: B077HS2WDB
  • UPC: 745125485126

Set of 2 Heavy Duty 18" Linear Actuator Stroke With Mounting Brackets 200 Pound Max Lift 12 Volt DC

Set of 2 Heavy Duty 18" Linear Actuator

40 1/4" Extended Length 22 1/4" Compressed Length From center of Mounting Holes Width: 2 1/8" (74mm) 12 Volt 8" Extension. 200 Pound (91 Kg) Max Lift. Speed: 12mm /second. 6mm Diameter Mounting holes 20mm Diameter Shaft Wiring included, pre-installed. Built-in clutch prevents over-extending and over-compressing.

  • Brand: Ezzy Lift
  • ASIN: B00U7MU8QW

Progressive Automations Mounting Bracket for PA-04, PA-03, PA-18 Linear Actuators including pins

Progressive Automations Mounting Bracket for PA-04, PA-03, PA-18

These mounting brackets are designed to make the installation of the actuators much easier and will allow the rotation of almost 180 degrees. They are designed to fit onto the motor end of the PA-03, PA-04 and PA-18 linear actuators.

  • Brand: PROGRESSIVE AUTOMATIONS
  • ASIN: B01CRLVO4U
  • UPC: 712324160536

Progressive Automations Mounting Bracket for PA-03, PA-04 Linear Actuators including pins

Progressive Automations Mounting Bracket for PA-03, PA-04 Linear

These mounting brackets are designed to make the installation of the actuators much easier and will allow the rotation of almost 180 degrees. They are designed to fit onto the both ends of the linear actuator.

  • Brand: PROGRESSIVE AUTOMATIONS
  • ASIN: B006P591Y0
  • UPC: 610563613144

Homend DC 12V 14 Inch Stroke Linear Actuator with Mounting Bracket 350MM 6000N/1320LB Maximum Load for Recliner TV Table Lift Massage Bed Electric Sofa Linear Actuator

Homend DC 12V 14 Inch Stroke Linear Actuator

6000N/1320LB Linear Actuator 14" Stroke DC 12V Electric Motor : Kindly Tips: IP44; Indoor Use Only Specifications: Material: Aluminum Alloy(24mm) Input: DC 12V Stroke Length: 350mm(14") Min. Retract Length: 525mm( 20.6")Max. Extend Length:875mm( 34.4") Max. Pushing Force: 6000N Max. Pulling Force: 4000N Travel Speed: 4.5-45mm/s speed(load) Limit Switch: Built-in Protection Class: IP44 Noise Level: 48db Input: DC12V-2.3A How To Use: 1. Prepare to connect the two wires of the actuator to a 12 volt battery 2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections. 3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch 4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end. 5.The actuator has pre-installed inner limit switch, it cannot be adjustable. How to protect your actuator: 1. Please use the 12V DC power adapter 2. Please do not exceed the rated load 3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it me...

  • Brand: Homend
  • ASIN: B07RXK8PSR
  • UPC: 733810536833

Heavy Duty Mounting Bracket

Heavy Duty Mounting

Using our mounting brackets will allow you to easily and quickly attach the actuator to various contact points. This bracket is machined from 6061-T6 aluminum and is incredibly strong. The Heavy-Duty Mounting Bracket works with our line of12V Heavy-Duty Linear Actuators. Shown with included hardware: (1) Mounting Bracket, (1) 1/4" ID Bushing, (1) Shoulder Bolt

  • Brand: ServoCity
  • ASIN: B00NVIAJ0E

Homend DC 12V 4 Inch Stroke Linear Actuator with Mounting Bracket 100MM 6000N/1320LB Maximum Load for Recliner TV Table Lift Massage Bed Electric Sofa Linear Actuator

Homend DC 12V 4 Inch Stroke Linear Actuator

6000N/1320LB Linear Actuator 4" Stroke DC 12V Electric Motor : Kindly Tips: IP44; Indoor Use Only Specifications: Material: Aluminum Alloy(24mm) Input: DC 12V Stroke Length: 100mm/4" Min. Retract Length: 220mm/8.7" Max. Extend Length: 395mm/15.5" Max. Pushing Force: 6000N Max. Pulling Force: 4000N Travel Speed: 4.5-45mm/s speed(load) Limit Switch: Built-in Protection Class: IP44 Noise Level: 48db Input: DC12V-2.3A How To Use: 1. Prepare to connect the two wires of the actuator to a 12 volt battery 2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections. 3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch 4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end. 5.The actuator has pre-installed inner limit switch, it cannot be adjustable. How to protect your actuator: 1. Please use the 12V DC power adapter 2. Please do not exceed the rated load 3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it means th...

  • Brand: Homend
  • ASIN: B07RYL6GG4
  • UPC: 733810519980

2pcs Heavy Duty Steel Mounting Bracket for Linear Actuator

2pcs Heavy Duty Steel Mounting Bracket for Linear

Linear Actuator mounting brackets are manufactured from 1018 carbon steel and are capable of holding a 350 pound (159kg) static load. The mounting brackets allow for the linear actuator to rotate 180 degrees, if necessary for your mounting application. Product Features: ☛ 2 pieces of mounting brackets,easy installation. ☛ Hard, safe and reliable, preventing rust. ☛ Universal accessories, using a variety of installations. ☛ Very strong and heavy duty,worth money. Packing Contents: 2 pieces of mounting brackets 2 pieces of mounting bolts 2 pieces of cotter pins Note: ☛ Please check your correct replacement parts before purchase, the picture and the description show more detail. ☛ If you have any questions, please contact us and we will do our best to provide you with the best service.

  • Brand: Vicue
  • ASIN: B07S6R1WP8

Homend DC 12V 12 Inch Stroke Linear Actuator with Mounting Bracket 300MM 6000N/1320LB Maximum Load for Recliner TV Table Lift Massage Bed Electric Sofa Linear Actuator

Homend DC 12V 12 Inch Stroke Linear Actuator

6000N/1320LB Linear Actuator 12" Stroke DC 12V Electric Motor : Kindly Tips: IP44; Indoor Use Only Specifications: Material: Aluminum Alloy(24mm) Input: DC 12V Stroke Length: 300mm(12") Min. Retract Length: 475mm(18.7"") Max. Extend Length:775mm(30.5") Max. Pushing Force: 6000N Max. Pulling Force: 4000N Travel Speed: 4.5-45mm/s speed(load) Limit Switch: Built-in Protection Class: IP44 Noise Level: 48db Input: DC12V-2.3A How To Use: 1. Prepare to connect the two wires of the actuator to a 12 volt battery 2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections. 3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch 4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end. 5.The actuator has pre-installed inner limit switch, it cannot be adjustable. How to protect your actuator: 1. Please use the 12V DC power adapter 2. Please do not exceed the rated load 3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it me...

  • Brand: Homend
  • ASIN: B07RZKJRHP
  • UPC: 733810520023

Homend DC 12V 18 Inch Stroke Linear Actuator with Mounting Bracket 450MM 6000N/1320LB Maximum Load for Recliner TV Table Lift Massage Bed Electric Sofa Linear Actuator

Homend DC 12V 18 Inch Stroke Linear Actuator

6000N/1320LB Linear Actuator 18" Stroke DC 12V Electric Motor : Kindly Tips: IP44; Indoor Use Only Specifications: Material: Aluminum Alloy(24mm) Input: DC 12V Stroke Length: 450mm/18" Min. Retract Length:625mm(24.6") Max. Extend Length:1075mm(42.3") Max. Pushing Force: 6000N Max. Pulling Force: 4000N Travel Speed: 4.5-45mm/s speed(load) Limit Switch: Built-in Protection Class: IP44 Noise Level: 48db Input: DC12V-2.3A How To Use: 1. Prepare to connect the two wires of the actuator to a 12 volt battery 2.Blue wire to the positive terminal and grey wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections. 3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch 4. Your actuator will hold its position when the power is off. It will automatically stop when reaches the end. 5.The actuator has pre-installed inner limit switch, it cannot be adjustable. How to protect your actuator: 1. Please use the 12V DC power adapter 2. Please do not exceed the rated load 3. All the actuators have duty cycle, they are unable to work all the time without stop. The duty cycle of this actuator is 20%. it mean...

  • Brand: Homend
  • ASIN: B07RYM4V4B
  • UPC: 733810536857
Similar Actuator Mounting Bracket Results