Competition Cams 281 Die Cast Aluminum Valve Covers for Big Block Chevrolet

Competition Cams 281 Die Cast Aluminum Valve Covers

Manufactured and packaged in the U.S.A., this new line of powder coated die cast aluminum valve covers will offer you a sleek, high performance look combined with rigid durability and unmatched reliability. They are a perfect addition to any high performance engine. These valve covers are perimeter bolt style and include two chrome breathers with laser etched logos, two black rubber grommets and installed baffles. The installed baffles are welded in place to ensure no oil enters the breathers. The chrome breathers are present on both valve covers which allow for proper crankcase ventilation. In addition, these covers were designed to be tall enough to provide the necessary clearance to accommodate aftermarket valve trains. Gaskets are not included.

  • Color: chrome
  • Brand: Comp Cams
  • ASIN: B003O5NXGG
  • UPC: 036584217268

Tempress Dark Gray 1317 Cam Hatch Without Lock, 13 X 17.25 X 1.5

Tempress Dark Gray 1317 Cam Hatch Without Lock,

The Temptress line of access hatches are as functional as they are stylish. The access cam hatch (dark gray), is made from a glass filled polypropylene, for strength and durability. All access hatches are designed for heavy traffic areas, and will withstand people walking or standing upon them. The 1317 access cam hatch features two dog down latches, that compress the gasket to create a weather tight seal with a quarter turn of the wrist. Access hatches also utilize a patented integral hinge assembly that allows for easy lid removal. The beveled and Skirted lid covers all fasteners for a clean look above or below decks. The access cam hatch line is the Great choice for easy dry storage, access to bait or fish wells, or electrical and plumbing lines. Cutout: 10-5/8" x 14-1/2" inside: 9-1/2" x 13-1/2" outside: 13" x 17-3/8".

  • Color: Dark Gray
  • Brand: Tempress
  • ASIN: B001O032S2
  • UPC: 079035446336

Ring Stick Up Cam Wall Mount Bracket, Caremoo Adjustable Aluminum Alloy Wall Mount with Weather Proof Protective Case for Ring Wired/Wireless HD Security Camera (1 Pack, Black)

Ring Stick Up Cam Wall Mount Bracket, Caremoo

Package Contains: 1 x ABS Plastic Case 1 x Aluminum Alloy Wall Mount 1 x Screw Set 1 x Starter Guide How To Install This Wall Mount Set? Separate the camera from the original holder with screwdriver(came with the camera) Put the camera into our case and secure it with provided screws and screwdriver Screw our metal mount on the wall Tighten the Ring camera to the bracket Lose the nut to adjust the angle; tighten the nut when you finished the adjustment Please note: The Camera is NOT INCLUDED in the package.

  • Color: Black
  • Brand: Caremoo
  • ASIN: B07NXX5KL7
  • UPC: 722737753096

Competition Cams 280 Die Cast Aluminum Valve Covers for Small Block Chevrolet

Competition Cams 280 Die Cast Aluminum Valve Covers

Manufactured and packaged in the U.S.A., this new line of powder coated die cast aluminum valve covers will offer you a sleek, high performance look combined with rigid durability and unmatched reliability. They are a perfect addition to any high performance engine. These valve covers are perimeter bolt style and include two chrome breathers with laser etched logos, two black rubber grommets and installed baffles. The installed baffles are welded in place to ensure no oil enters the breathers. The chrome breathers are present on both valve covers which allow for proper crankcase ventilation. In addition, these covers were designed to be tall enough to provide the necessary clearance to accommodate aftermarket valve trains. Gaskets are not included.

  • Color: chrome
  • Brand: Comp Cams
  • ASIN: B003JD26CA
  • UPC: 036584217251

Unisource 1400 PVC Suction/Discharge Hose Assembly, 1-1/2" Aluminum Cam and Groove Connection, 29.8" Hg Vacuum Rating 50 PSI Maximum Pressure, 15' Length, 1-1/2" ID, Black Cover with Green Helix

Unisource 1400 PVC Suction/Discharge Hose Assembly, 1-1/2" Aluminum

Series 1400 is a heavy-duty liquid suction hose ideal for construction, dewatering, liquid waste, cesspool cleaning, septic handling, agricultural applications, and marine use. Hose is designed to remain flexible in winter conditions, lightweight, and external helix provides for easy drag. The smooth interior provides for optimum product flow. Flexible for easy handling and storage.

  • Color: Black
  • Brand: Unisource
  • ASIN: B0063LMU2Q

RAB Lighting VXCW Weatherproof Round Box with No Cover, Aluminum, 1/2" Hole Size, White

RAB Lighting VXCW Weatherproof Round Box with No

This RAB Lighting VXCW white weatherproof round box is made of die cast aluminum for resistance to corrosion and is suitable for use in wet locations. It has a green washer-head ground screw in a pre-tapped hole, and it comes with a 1/8" thick closed cell foam rubber gasket for protection from weather. This mounting box measures 1-5/8 x 4-1/8 inches/4.1 x 10.5 cm (H x W) and is tapped with 1/2" holes. (H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right.) It is Underwriters Laboratories (UL) listed as suitable for use in wet locations and can be used in a variety of outdoor lighting applications.RAB Lighting manufactures LED, metal halide, and high-pressure sodium lighting fixtures and controls for indoor and outdoor applications. The company, founded in 1946, is headquartered in Northvale, NJ.What's in the Box?Round junction box1/8" foam rubber gasketHardware

  • Color: White
  • Brand: RAB Lighting
  • ASIN: B0027OWDPM
  • UPC: 019813904566

KaTur Motorcycle Black Clarity Edge Deep Cut Derby Timing Cover CNC Aluminum Derby Cover Timing Timer Covers for Harley 1999-2014 Harley Twin Cam Touring Road King Electra Glide FLHR FLHX FXST Dyna

KaTur Motorcycle Black Clarity Edge Deep Cut Derby

Specifications: Condition:100% Brand New Material: CNC Aluminum Dimension: As Picture Showed Features: 100% Brand New and High Quality Derby Cover Timer Cover Kit. CNC machined billet aluminium material for high rigidity and durability. The cover surfaces are polished and anodized to a rich satin sheen, makes your motorcycle stand out. Easy to install and no modification needed, a perfect replacement for the old or damaged one. Fit for Touring Dyna Softail Evolution. Fitment: Please check the detail measurement to make sure it will fit your bike. Fit for Harley 2012-2013 FLD Dyna Switchback 2001-2013 FLHR Road King 2000-2013 FLHRCI Road King Classic 2004-2008 FLHRS Road King Custom 1996-2013 FLHTC Electra Glide Classic 1999-2013 FLHTCU Ultra Classic Electra Glide 2008-2013 FLHTCHUSE3 Ultra Classic Electra 2009-2013 FLHTCUTG Tri Glide Ultra Classic 2010-2013 FLHTK Electra Glide Ultra Limited 2006-2013 FLHX/I Street Glide 2010-2013 ELHXSE CVO Street Glide 2010-2011 FLHXXX Street Glide Trike 2003-2013 FLSTCI Heritage Softail Classic 2001-2013 FLSTF Fat Boy 2010-2013 FLSFB Softail Fat Boy Lo 2005-2013 FLSTN/I Softail Deluxe 1999-2013 FLTR-I Road Glide 2003-2009 FXD Dyna Super Glide 2006-2013 FXDBI Dyna Street Bob 2005-2013 FXDC Dyna Super Glide Custom 1999-2013 FXDL Dyna Low Rider 20...

  • Color: Black
  • Brand: KaTur
  • ASIN: B07PP6SB24

Nite Ize CamJam XT Aluminum Rope Tightener, Large Versatile Tie Down Cam Mechanism With Carabiner Clip + 500 LB Load Limit

Nite Ize CamJam XT Aluminum Rope Tightener, Large

Nite Ize is known for creating products that make your life easier at home, at work, and on the go. The CamJam XT Aluminum Rope + Cord Tighteners feature the Nite Ize signature, knot-free CamJam tightening and tensioning technology. Available in two heavy-duty sizes and built from durable, cast aluminum, this rugged combination of carabiner and cam mechanism is designed to tighten, tension, connect, and secure serious loads up to 280 and 500 pounds respectively. The CamJam XT products feature a carabiner clip and gate on one end, and a rotating cam mechanism on the other. This clever design allows the CamJam XT to be configured in either a Fixed End or a Loop System as a heavy duty tie down for lumber, gear, and other serious loads. In both systems, the CamJam XT can be easily adjusted and re-adjusted time and again to tackle a multitude of tie-down projects over the years. The XT holds cord from 1/16""-3/16"" [2mm-5mm] in width, and the XT Large holds rope with a diameter of 1/8”-3/8” [3mm-9mm]. Remember to never exceed working load limits: • CamJam XT Single Pack Load Limit: 280 lbs | 127 kg, Break Strength: 837 lbs | 380 kg • CamJam XT Combo Pack Load Limit: 100 lbs | 45 kg, Break Strength: 300 lbs | 136 kg • CamJam XT Large Single Pack Load Limit: 500 lbs | 227kg, B...

  • Color: Black
  • Brand: Nite Ize
  • ASIN: B00XVP9ZPM
  • UPC: 094664033238

Competition Cams 210 Two-Piece Billet Aluminum Timing Cover for Small Block Chevrolet

Competition Cams 210 Two-Piece Billet Aluminum Timing Cover

COMP Cams Two-Piece Billet Aluminum Timing Covers eliminate timing cover flex while also allowing the camshaft to be replaced without disturbing the oil pan seal. End play adjustment is made with a dial indicator access hole and an integrated timing pointer design simplifies ignition timing checks. These rigidly designed billet covers are compatible with most water pumps and gear drives.

  • Brand: Comp Cams
  • ASIN: B000V9CV9S
  • UPC: 036584394099

PETZL Grigri 2 Belay Device - Turquoise

PETZL Grigri 2 Belay Device -

25% lighter and 20% more compact than the original, Petzl's GriGri 2 provides assisted braking with excellent control while belaying and rappelling on single lines. With a new progressive descent control system, it handles a broader range of rope diameters from 8.9 to 11 mm to cover today's popular lead ropes.

  • Color: Turquoise
  • Brand: Petzl
  • ASIN: B00Q78WFKC

COMP Cams 310 Billet Aluminum Timing Cover for Small Block Chevy - 3 Piece

COMP Cams 310 Billet Aluminum Timing Cover for

The COMP Cams 3-piece billet aluminum timing cover for small block Chevrolet engines allows access to the camshaft timing adjustments without having to remove the harmonic damper or disturb the oil pan seal. Designed to be lightweight yet rigid, this billet cover offers convenience and performance in one easy-to-install package.

  • Brand: Comp Cams
  • ASIN: B000ILOK84
  • UPC: 036584077770

PT Coupling CF800V PT ALUM CF800V Aluminum Contractor Type V Dust Cap Cam and Groove Fitting, 8.0" Socket (Dust Cap/Dust Cover)

PT Coupling CF800V PT ALUM CF800V Aluminum Contractor

This PT Coupling Contractor Type V dust cap has an aluminum Body for connection to adapting to a male adapter cam and groove-style fitting. The aluminum Body resists corrosion and abrasion, is light weight, and is suitable for use with water, hydraulic oil, coolants, gasoline, and petroleum products. This cam and groove hose fitting is used in applications such as fuel delivery, wine transfer, and grain movement. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of Brass, Stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, Push-to-Connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air Compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including Agriculture, mining, road construction, firefighting, and aviation.

  • Brand: PT Coupling
  • ASIN: B01CKK8NMO

Motorcycle Derby Cover Timing Timer Cover Engine Cover Cap CNC Aluminum Fit For Harley Touring Softail Road King Electra Glide

Motorcycle Derby Cover Timing Timer Cover Engine Cover

🔻 Description: ✧ Material: CNC-machined Aluminum ✧ The Big One Diameter: 185mm / 7.28" ✧ The Small One Diameter: 77mm / 3.03" ✧ High class quality and very durable. ✧ Easy to install. Installation instructions not included 🔻 Fitment: (It might fit other years please check with your local dealer) - for Harley FLD Dyna Switchback 2012-2013 - for Harley FLHR Road King 2001-2013 - for Harley FLHRCI Road King Classic 2000-2013 - for Harley FLHRS Road King Custom 2004-2008 - for Harley FLHTC Electra Glide Classic 1996-2013 - for Harley FLHTCU Ultra Classic Electra Glide 1999-2013 - for Harley FLHTCHUSE3 Ultra Classic Electra 2008-2013 - for Harley FLHTCUTG Tri Glide Ultra Classic 2009-2013 - for Harley FLHTK Electra Glide Ultra Limited 2010-2013 - for Harley FLHX/I Street Glide 2006-2013 - for Harley ELHXSE CVO Street Glide 2010-2013 - for Harley FLHXXX Street Glide Trike 2010-2011 - for Harley FLSTCI Heritage Softail Classic 2003-2013 - for Harley FLSTF Fat Boy 2001-2013 - for Harley FLSFB Softail Fat Boy Lo 2010-2013 - for Harley FLSTN/I Softail Deluxe 2005-2013 - for Harley FLTR-I Road Glide 1999-2013 - for Harley FXD Dyna Super Glide 2003-2009 - for Harley FXDBI Dyna Street Bob 2006-2013 - for Harley FXDC Dyna Super Glide Custom 2005-2013 - for Harley FXD...

  • Color: Black
  • Brand: AQIMY
  • ASIN: B07PHYFKQS
  • UPC: 705495223827

Makita AF505N Brad Nailer, 2-Inch

Makita AF505N Brad Nailer,

2” Brad Nailer Model: AF505N Narrow Nose Design Allows Easy Nailing Access in Confined Areas “Tool-less” quick release cam-lock opens nail guide assembly to easily clear jammed nails; efficient design minimizes downtime Easy to use "tool-less" depth adjustment dial for a wide variety of finish applications Non-marring rubber nose and bumpers protect the wood's surface from being scratched or damaged Tool hook can be rotated 180° so tool can remain close by, but never in the way Cast and machined nose piece for precise contact Dual nail reload indicator window alerts the user when to reload nails to avoid blank drives Multi-directional exhaust port rotates 360° to direct exhaust air away from user Rubberized soft grip provides more comfort and control Drives a range of 18 gauge brad nails, from 5/8" to 2", into hard or soft wood applications; magazine capacity is up to 100 nails Ideal for trim work, baseboard and crown molding installation, flooring and other woodworking applications  INLCUDES: 2 ea. Non-mar Tip (HY00000028) Oil Supply (181434-7) Safety Goggles (191687-A) Tool Case   SPECIFICATIONS: Operating Air Pressure (PSI): 60-115 Nail Size: 5/8” to 2” (18 ga.) Magazine Capacity: 100 Dimensions (L x W x H): 10-1/4" X 9-5/8" X 2-1/2" Net Weight (lbs.): 3.0...

  • Brand: Makita
  • ASIN: B00K1AXGQY
  • UPC: 088381680806

PT Coupling CF300V Alum CF300V Aluminum Contractor Type V Dust Cap Cam and Groove Fitting, 3.0" Socket (Dust Cap/Dust Cover)

PT Coupling CF300V Alum CF300V Aluminum Contractor Type

This PT Coupling Contractor Type V dust cap has an aluminum Body for connection to adapting to a male adapter cam and groove-style fitting. The aluminum Body resists corrosion and abrasion, is light weight, and is suitable for use with water, hydraulic oil, coolants, gasoline, and petroleum products. This cam and groove hose fitting is used in applications such as fuel delivery, wine transfer, and grain movement. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of Brass, Stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, Push-to-Connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air Compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including Agriculture, mining, road construction, firefighting, and aviation.

  • Brand: PT Coupling
  • ASIN: B01CKK9670
Similar Aluminum Cam Cover Results