AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power Bluetooth Audio Amplifier Board (Bluetooth Amp)

AOSHIKE DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board

TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output ,Video Audio Accessories Power supply: DC 12-24V Output power: 100W Use 12 to 24 v power supply,DC power supply wide working voltage, power saving type design, efficiency is as high as above 90 percent.The biggest can support 100 w Bass sound channel output Working voltage range: Dc 9 to 25 v (current 2 -3A above, if you want to power Big,advice 19-24v 4A above). Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz Audio input sensitivity: 500 mv. Speaker impedance: bass speaker impedance: 2-8 ohm Bass output power: 12V/10w(8ohm)/ >19w(4ohm)/>22 w( 3ohm m) />30w(2ohm) 15V/>15w(8ohm)/>29w(4ohm)/>39w(3ohm)/>50w(2ohm) 19V/>24w(8ohm)/>48w(4ohm)/>60w(3ohm)/>75w(2ohm) 24V/>38w(8ohm)/>75w(4ohm)/>95w(2-3ohm) Packaging included 1pcs* Subwoofer Amplifier Board

  • Brand: AOSHIKE
  • ASIN: B07BKYL3GC
  • UPC: 606479978040

WINGONEER TDA7498E 2x160W Dual Channel Audio Amplifier Board, Support BTL Mode 1X220W Single Channel, DC 24V Digital Stereo Power Amp Module for Car Vehicle Computer Speaker DIY

WINGONEER TDA7498E 2x160W Dual Channel Audio Amplifier Board,

WINGONEER trademark Reg.NO:4747611Features:Amplifier chip: original TDA7498EOutput power: 160W+160W (Vcc = 36 V, RL = 4Ω, THD: 10%)Output power: 1x220W single channel in parallel BTL(Vcc = 36 V, RL = 3Ω, THD: 10%)Support BTL mode (short J1, J2, J3, J4 located on the back of amplifier board)Wide range single power supply: 15-36VDC, with input reversed polarity protection (if speaker's real power is large enough, the recommended DC power supply is 32V, 8A or more. Too small power would cause distortion or staccato to lose the shock effect)Applicable speaker impedance: 4 ohm, 6 ohm, 8 ohmCooling: temperature controlled forced air cooling(the fan will automatically work to force cooling when the heat sink temperature is hot enough)Four fixed gain settings available: 29.6 dB, 33.1 dB, 35.6 dB and 35.6dBWith standby and mute featuresHigh efficiency: 85%Description:The TDA7498E is a 160W+160W dual-BTL class-D audio amplifier with single power supply designed for home theater and active speaker applications. It adopts 36-pin PowerSSO packaging with exposed pad up (EPU), more convenient to mount a separate heatsink.Package Include:1x WINGONEER TDA7498E Amplifier Board

  • Brand: WINGONEER
  • ASIN: B01K7YXGMM
  • UPC: 662578900245

Digital Amplifier Board, DROK HiFi Dual Channel Stereo Audio Amplifier DC10-25V Digital 2.0 Power Amp Board 50W+50W Output with Volume Adjustment Knob

Digital Amplifier Board, DROK HiFi Dual Channel Stereo

DROK Digital Amplifier Board 100W  Parameters: Voltage range: DC 10-25V Output power: 100W (Max) Output load: 4-8 Ohm (Recommend) Frequency response range: 14-100KHz Signal-to-noise ratio (SNR): not less than 100DB Switching frequency: 1.2MHz Chip: TPA3116x2 Reverse connection protection: Yes (Positive and negative reversal is not energized.) The number of channels: one left channel and one right channel (PBTL) Special Notes: 1. The speaker of each channel must be connected in strict accordance with the wiring diagram. If reverse the connection, will seriously reduce the sound effects. 2. The current ability of external power supply 5V port is within the limits of 100mA. Super-power use is strictly prohibited. 3. Increasing the power supply voltage appropriately and using relatively low impedance speakers, can be very effective to improve the output power. 4. We recommend for adequate power supply (the current must be large enough), otherwise, it cannot give play to the power of amplifier and speaker. 5. Although the product is a digital amplifier, there still will be heating phenomenon during the use, it is normal. Package Includes: 1 × TPA3116D2 Digital Amplifier Board

  • Brand: DROK
  • ASIN: B07B4BKTVP

120W Car Subwoofer High Power HiFi Bass Bluetooth Amplifier Board Support FLAC APE WAV WMA MP3 Decoding DC 12V/ 24V/ AC100V-240V

120W Car Subwoofer High Power HiFi Bass Bluetooth

Features: 1. Bluetooth receiver, radio, Kara OK function. 2. Support 5 format file decoding: FLAC, APE, WAV, WMA, MP3. 3. Support adjusting treble, bass and master volume independently. 4. With AUX input, can be connect to PC, phones, DVD, CD, etc. 5. Digital hi-fi amplifier, peak power 120W, can be used with 4 ohm speaker. Specifications: Voltage: DC 12V/ 24V or AC 110-240V Rated power: 30W Peak Power: 120W Weight: 290g Mounting cutout: 3.93* 1.37"/ 100 * 35mm Overall size: 5.4*3.34*3.5"/ 138 * 85 * 90mm Installation hole pitch: 2.75*4.88"/ 70 * 124mm Package Include: 1 x Amplifier Board 1 x Remote Controller 1 x DC Power Cable 1 x AC Power Cable 1 x 1 to 2 Audio Cable 2 x Speaker Cables

  • Brand: Facmogu
  • ASIN: B07DRFHL13

Aideepen 50W + 50W TDA7492P 2x50 Watt Dual Channel Amplifier Wireless Digital Bluetooth 4.0 Audio Receiver Amplifier Board (Red)

Aideepen 50W + 50W TDA7492P 2x50 Watt Dual

Power: 2.1 interface 8 ~ 24V DC power supplyAudio input: stereo input various versions of the Bluetooth connection,using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibilityOutput Impedance: 8 ohms Best(4,6,8,16 ohmimpedance can drive speakers)Output Power: Add pre-5532 output foot (powered 25V ,6-ohmimpedance output 2 X 50W, 8 ohmimpedance output 2X40W dual-channel)TDA7492 digital amplifier chip, designed to optimize the circuit layout,the sound quality is very good, big powerDIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn

  • Color: 50W+50W Red TDA7492P
  • Brand: Aideepen
  • ASIN: B01N3UM7TM
  • UPC: 606413034467

Bluetooth Amplifier Board, DROK Digital Amplifier Wireless BT 3.0 4.0 4.1 Audio Amp Board Headphone 2 Channel 50W+50W Small Amplifier Module with Case

Bluetooth Amplifier Board, DROK Digital Amplifier Wireless BT

DROK Bluetooth Amplifier Board  Product Parameter: Operating Voltage: DC 4.5-27V Output Power: 50W*2 Signal-Noise Ratio: 102dB Package Includes: 1 X 50W*2 Amplifier Board

  • Brand: DROK
  • ASIN: B074FR4B7H

Amplifier Board, DROK TPA3116 HiFi Dual-channel Stereo Audio Amplifier Subwoofer DC10-25V Digital 2.0 Amp Module 25W+25W Output with Volume Adjustment Knob

Amplifier Board, DROK TPA3116 HiFi Dual-channel Stereo Audio

Parameters: Voltage range: DC 10-25V Output power: 50W (Max) Output load: 4-8 Ohm (Recommend) Frequency response range: 14-100KHz Signal-to-noise ratio (SNR): not less than 100DB Switching frequency: 1.2MHz Reverse connection protection: Yes (Positive and negative reversal is not energized.) Quantity of channels: one left channel and one right channel Use Notes: 1. The speaker of each channel must be connected in strict accordance with the wiring diagram. If reverse the connection, will seriously reduce the sound efficiency. 2. The current ability of external power supply 5V port is within the limits of 100mA. Super-power use is strictly prohibited. 3. Increasing the power supply voltage appropriately and using relatively low impedance speakers, can be very effective to improve the output power. 4. We recommend for adequate power supply (the current must be large enough), otherwise it cannot give play to the power of amplifier and speaker. 5. Although the product is a digital amplifier, but there still will be heating phenomenon during the use, it is normal. Package Includes: 1 × TPA3116 Amplifier Board

  • Brand: DROK
  • ASIN: B01N1UHTU1

KNACRO TPA3116 2.1 Subwoofer Amplifier Board DC12-24V HIFI Digital Amplifier Board 50W + 50W + 100W

KNACRO TPA3116 2.1 Subwoofer Amplifier Board DC12-24V HIFI

If you want a Bluetooth version: https://www.amazon.com/dp/B077GS6SC9 Operating voltage range: DC 12-25V (current 3-4A above, if the power of the larger recommended 19-24V / 4-5A above); Audio input sensitivity: 500-800mV; Frequency response range: 20Hz-20KHz; Horn impedance: Left and right channel speakers: 3.5-8 Ω, woofer impedance: 2-8 Ω; Maximum output power: 50W (left channel) + 50W (right channel) + 100W (bass channel). Package Included: 1*TPA3116 2.1 Subwoofer Amplifier Board 1*PH2.0-3P single plug shielded wire About power selection: 24V Power Adapter: https://www.amazon.com/dp/B076DCCDZD https://www.amazon.com/dp/B01J19G00E https://www.amazon.com/dp/B06Y1DTG35 The use of DC power supply, positive and negative reverse protection, positive and negative reverse connected no power. The power supply must not be mistakenly connected to the horn's output connector. This can cause damage to the amplifier chip. The maximum working voltage is 25V (Note: The maximum working voltage of TPA3116 power amplifier chip is 26V, do not use more than 26V). If you use an ordinary AC transformer power supply, you must add rectifier filter before you can use it. (Note: The no-load voltage after rectification should not exceed 26V).

  • Brand: KNACRO
  • ASIN: B06XSCVPWF
  • UPC: 713653013234

AOSHIKE 120WX2 TPA3116 CSR8635 4.0 Bluetooth Amplifier Digital Audio Board TPA3116D2 Amplificador Dual Channel Audio Amps moudle

AOSHIKE 120WX2 TPA3116 CSR8635 4.0 Bluetooth Amplifier Digital

Using the digital power amplifier chip TPA3116D2 college D class operation, integrated CSR8635.4 version of the Bluetooth module. Power amplifier chip with more than 90% of the power efficiency and low idle loss characteristics. High-level modulation system configuration, advanced level reduces the number of components, integrated self-protection circuit, including overvoltage, undervoltage, overheating, DC detection and short circuit protection, heat-resistant package. Bluetooth transmission of about 10 meters, the use of the environment do not, transmission distance, if the DIY speaker, it is best not to use the Bluetooth signal shielding material. Specifications: Product name:TPA3116D2 Digital audio amplifier Bluetooth module: BTM836 / CSR8635 (version 4.0) Chip type: TDA3116D2 Transmission distance: up to 10 meters (no interference blocking) Supply voltage: DC12-24V Supply current: greater than 3A Output power: 120W * 2 Number of channels: 2-channel (high and low tone adjustment) Power interface: 2.1 DC socket Applicable speaker impedance: 4-8ohm Digital amplifier size: 9.8 x 8 x 1.8cm Note:This TPA3116D2 Digital audio amplifier Board itself without the noise,If it was have beep wheb you use,pls check your sound source and Speaker whether have problem,More detail technical pr...

  • Color: Blue
  • Brand: AOSHIKE
  • ASIN: B01MZ0IZMW

WINGONEER® TPA3116D2 2x50W+100W 2.1 Channel Digital Subwoofer Power Amplifier Board DC12V-24V

WINGONEER® TPA3116D2 2x50W+100W 2.1 Channel Digital Subwoofer Power

WINGONEER trademark Reg.NO:4747611Notice:This amplifier board must be powered by DC power(DC12-24V), it's better to use high-performance switch power. Don't use transformer!Specifications:Supply Voltage: DC 12-24VChip: TPA3116D2Channel Type: 3 Channels(Left Channel, Right Channel, Subwoofer)Output Power: 50W*2 + 100W*1 SubwooferOutput Match: 4-8 ohmAudio Output: TerminalsFrequency Response Range: 14-100KHzSNR: 100dBSwitching Frequency: 1.2MHzPCB Board Size: 100 * 70 * 30mm / 3.94 * 2.75 * 1.18in (L * W * H)Weight: 113g / 3.98ozPackage Size: 13.5 * 11 * 5cm / 5.31 * 4.33 * 1.97in (L * W * H)Package Weight: 167g / 5.9ozWhat is included:1x WINGONEER 2.1 Channel Audio Amplifier Board1x WINGONEER Audio Cable

  • Brand: WINGONEER®
  • ASIN: B01M70KGSN
  • UPC: 662578902317

Dual Channel Bluetooth Amplifier Board,Quimat TDA7492 2 x 50 Watt 2 Channel Wireless Audio Receiver Digital HiFi Module with Protective Case and Heat Sinks

Dual Channel Bluetooth Amplifier Board,Quimat TDA7492 2 x

Quimat have modified the TDA7492P audio receiver digital amplifier board that will be more convenient for users to operate the board.The key of the operation stability of the board are the input voltage and heating problems,so Quimat added the heat sinks to enhance heat dissipation which help the users to avoid the board burned by the high temperature. Specification: Power:2.1 interface 8-25V DC power supply Audio input: stereo input various versions of the Bluetooth connection, using high-quality Bluetooth chip,Bluetooth V4.0,high software compatibility Output Impedance:8 ohms Best(4,6,8,16 ohm impedance can drive speakers) Output Power:powered 25V,6-ohm impedance output 2 X 50W,8 ohm impedance output 2 X 40W dual-channel If you directly use Bluetooth,when power,wait 3s-10s,until LED Blue and Red light flashing alternately,then you can use your device to find my Bluetooth module,then connect it,can directly use it. Parameter Material:PCB Digital Amplifier Board:3.2*2.0*0.7 inches(L*W*H) Protective Case:4.0*2.7*1.0 inches(L*W*H) Net Weight:0.2 pounds Package Includes: 1 x Quimat Hifi Mini Bluetooth Digital Amplifier Board with 3 bit 0.36 "heat sink 1 x Protective Case with A full set of screws, studs and magnetic pads 1 x 2.1mm x 5.5mm Male Connector

  • Color: With Protective Case + Heat sinks
  • Brand: Quimat
  • ASIN: B06X6MTTBY

HiLetgo TDA7492P 50W+50W 250W Wireless Bluetooth CSR4.0 BT 4.0 Audio Receiver Digital Amplifier Board AMP

HiLetgo TDA7492P 50W+50W 250W Wireless Bluetooth CSR4.0 BT

Power: 2.1 interface 8 ~ 24V DC power supply Input: stereo input various versions of the Bluetooth connection Using CSR8635 Bluetooth chip, Bluetooth V4.0, high software compatibility Output Impedance: 8 ohms Best(4,6,8,16 ohm impedance can drive speakers) Output Power: Add pre-5532 output foot (powered 25V ,6-ohm impedance output 2 X 50W, 8 ohm impedance output 2X40W dual-channel) TDA7492 digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn

  • Color: Red
  • Brand: HiLetgo
  • ASIN: B01CZL6S84

Clyxgs 2.1 Channel Class D Digital Power Audio Stereo AMP Module 2x80W+100W(Left,Right & Subwoofer) TPA3116D2 Amplifier Board,12-26V( Recommended 24V) 100 decibels

Clyxgs 2.1 Channel Class D Digital Power Audio

Features:- Class D efficiency in a compact size- 12 to 24 VDC for versatility- 2 x 50W plus 100W into a mono channel for 2.1 applications(left/right and subwoofer channel)-Adopts two high-quality TPA3116D2 digital amplifier chips.-A user can adjust the volume by themselves easily.-Applicable speaker impedance: 4-8 ohm.Specification:Chip type: TPA3116D2 x 2Power supply: DC 12-24VOutput load: 4-8ΩOutput power: 80W*2(Left & Right) 100W*1(Subwoofer)Frequency Response Range: 14-100KHzSNR: 100dbChannel amount: 3 Channels(Left Channel, Right Channel,Subwoofer Channel)Switch frequency: 1.2MHzSignal input: 3.5 mm stereo jack or 3-pin socketSignal output: 6 screw terminalsPower requirements: 12-26 VDCPower input: 2.1 mm x 5.5 mm DC jackUsers can easily adjust the volume, just connect the power and speakers that you can enjoy pure digital music.Sound quality is very good, high efficiency and amplifying power. Great for great for connecting to telephone or computer, DIY speaker, vehicle auto stereo, etc.The amplifier board uses TPA3116D2 chip as core which is a high-performance digital power amplifier chip. Built-in volume, subwoofer, and satellite potentiometer for sound customization.Pre-assembled and pre-tested for easy project integration, which makes your project easy to complete. The ...

  • Brand: Clyxgs
  • ASIN: B07KWS33LP
  • UPC: 730964295135

AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories

AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board

TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output ,Video Audio Accessories Power supply: DC 12-24V Output power: 100W Use 12 to 24 v power supply,DC power supply wide working voltage, power saving type design, efficiency is as high as above 90 percent.The biggest can support 100 w Bass sound channel output Working voltage range: Dc 9 to 25 v (current 2 -3A above, if you want to power Big,advice 19-24v 4A above). Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz Audio input sensitivity: 500 mv. Speaker impedance: bass speaker impedance: 2-8 ohm Bass output power: 12V/10w(8ohm)/ >19w(4ohm)/>22 w( 3ohm m) />30w(2ohm) 15V/>15w(8ohm)/>29w(4ohm)/>39w(3ohm)/>50w(2ohm) 19V/>24w(8ohm)/>48w(4ohm)/>60w(3ohm)/>75w(2ohm) 24V/>38w(8ohm)/>75w(4ohm)/>95w(2-3ohm) Packaging included 1pcs* Subwoofer Amplifier Board

  • Brand: AOSHIKE
  • ASIN: B01N5DGK37

KKmoon TDA7492P 2*25W Wireless Bluetooth V2.1 Audio Receiver Amplifier Board Module with AUX Interface

KKmoon TDA7492P 2*25W Wireless Bluetooth V2.1 Audio Receiver

Sound quality is very good and it can drive 4/6/8/16 ohm speakers. BT V4.0, it has sufficient power output 2*25W. Features: Sound quality is very good by using this module. Equipped with AUX interface(wired audio input). Using TDA7492P power amplifier chip, BT V2.1. After power on, automatically enter into pairing mode, search the name: SANWU Audio. Applicable speaker impedance: 4/6/8/16 ohm (8 ohm is the best). Specifications: Supply Voltage: DC 10-25V Power Interface: 2.1 DC Socket Audio Input: BT Receiver V2.1 Audio Output: Terminals Output Power: 2*25W Applicable Speaker Impedance: 4/6/8/16 ohm PCB Size: 70 * 47mm / 3.23 * 1.97in Weight: 31g / 1.09oz Note: If you use external audio, you need connect 3.5mm audio line; Auto detection for AUX input, the BT will disconnect after AUX input. Package List: 1 * BT Audio Power Amplifier Board

  • Brand: KKmoon
  • ASIN: B01M0UYX8M
  • UPC: 603983399132
Similar Amplifier Board Results