HiLetgo 5pcs LM386 Audio Amplifier Module 200 Times Input 10K Adjustable Resistance

HiLetgo 5pcs LM386 Audio Amplifier Module 200 Times

LM386 Audio Amplifier Module 1. Onboard LM386 Chip 2. 200 multiplier benefits circuit design 3. On-board speaker wiring Block 4. On-board 10K variable resistor, you can adjust the volume of the enlarged 5. Onboard power indicator 6. the chip pin leads, can be directly input audio signal 7. Operating voltage: 5 ~ 12V 8. Board size: 41 (mm) x13 (mm)

  • Color: Blue
  • Brand: HiLetgo
  • UPC: 797698770208

KKmoon TDA7492P 2*25W Wireless Bluetooth V2.1 Audio Receiver Amplifier Board Module with AUX Interface

KKmoon TDA7492P 2*25W Wireless Bluetooth V2.1 Audio Receiver

Sound quality is very good and it can drive 4/6/8/16 ohm speakers. BT V4.0, it has sufficient power output 2*25W. Features: Sound quality is very good by using this module. Equipped with AUX interface(wired audio input). Using TDA7492P power amplifier chip, BT V2.1. After power on, automatically enter into pairing mode, search the name: SANWU Audio. Applicable speaker impedance: 4/6/8/16 ohm (8 ohm is the best). Specifications: Supply Voltage: DC 10-25V Power Interface: 2.1 DC Socket Audio Input: BT Receiver V2.1 Audio Output: Terminals Output Power: 2*25W Applicable Speaker Impedance: 4/6/8/16 ohm PCB Size: 70 * 47mm / 3.23 * 1.97in Weight: 31g / 1.09oz Note: If you use external audio, you need connect 3.5mm audio line; Auto detection for AUX input, the BT will disconnect after AUX input. Package List: 1 * BT Audio Power Amplifier Board

  • Brand: KKmoon
  • ASIN: B01M0UYX8M
  • UPC: 603983399132

DROK TDA7297 15W+15W Audio Power Amplifier Module AC/DC 9-18V 2.0 Dual Channel Stereo Amp Board, DIY Sound System Component

DROK TDA7297 15W+15W Audio Power Amplifier Module AC/DC

Parameters:Power Supply: AC/DC 9-18V, Recommend 12V 2AOutput Impedance:4-8 ohmsEfficiency: up to 90%Output Power: 15W+15WChip: TDA7297 Dual-Channel Amplifier ChipPlease follow the picture to connect the Power Supply and Speaker. Package Includes:1x Mini Amplifier

  • Brand: DROK
  • ASIN: B00C4MT274
  • UPC: 619397028223

Subwoofer Plate Amplifier Module 120w RMS

Subwoofer Plate Amplifier Module 120w

Features: Variable 50Hz ~ 150Hz low pass filter Variable gain control Selectable 0° / 180° phase RCA type L/R line level inputs (summed mono) Push terminal inputs for speaker level input Push terminal outputs for satellite speaker output Auto sound-sensing power ON/OFF 19" detachable lead for internal woofer connection Includes ten mounting screws Specifications: Power output: 120W RMS, at 4O Frequency response: 20Hz ~ 150Hz Power requirements: 110VAC, 60Hz, 250W Dimensions: Overall plate: 9-7/8" (H) x 7-7/8" (W) Required cutout: 8-7/8" (H) x 6-7/8" (W) Required mounting depth: 4"

  • Brand: MCM
  • ASIN: B00N3ML3QC
  • UPC: 702472096030

Amplifier Borad, Yeeco Digital Amplifier Board 2.0 Dual Channel Audio Amplifier 150W+150W Output DC 12-24V Digital Amp Module Power Amplifier Board Stereo Amp Amplify DIY Circuit Module

Amplifier Borad, Yeeco Digital Amplifier Board 2.0 Dual

Product information: Power supply: DC 12-24V Supply current: >3A Output power: 150W*2 Channel amount: 2 Size: 124mm*100mm*18mm (length * width * height) Please note that noise will happen in these situation: (1)Hardware problem: -Power supply is not sufficient or not stable; -Using switch power supply -Using transformer as power supply and without shield & isolation; wdo not avoid interference -Local at the environment with electromagnetic interference -Audio input has its own problem (2)Software problem: -Audio driver setting -Music Player effects setting Solution: (1)Hardware problem-> The power supply should not be placed too close to the amplifier board in order to avoid electromagnetic interference. It is better to use high quality power supply which offers stable power. If you use power transformer, using an iron sheet to cover the transformer is highly recommended. (2)Software problem-> When you connect the amplifier to telephone or computer, you can turn off the special effects software or sound card driver effects settings. Using the software after making sure they will not take effect on the sound effect. Package: 1*2.0 Dual Channel Stereo Amp Board

  • Brand: Yeeco
  • ASIN: B0716HTXNK

KOHLER K-99696-NA DTV Plus Amplifier Module

KOHLER K-99696-NA DTV Plus Amplifier

The KOHLER DTV+ amplifier uses Bluetooth technology to stream and control music from your favorite mobile devices, providing a simple and elegant way to add audio to an existing space, a remodel, or a new installation project. Primarily designed for use with the DTV+ digital shower control system, this amplifier can also be on its own to provide outstanding audio output inside or outside the home.

  • Brand: Kohler
  • UPC: 885612325242

UTP utl LM386 Audio Amplifier Module 200 Times 5V-12V Input 10K Adjustable Resistance

UTP utl LM386 Audio Amplifier Module 200 Times

Type:Voltage Regulator Condition:New Application:Computer Supply Voltage:1 Dissipation Power:1 Model Number:MW is_customized:Yes Place of Origin:China (Mainland)

  • Brand: UTP
  • ASIN: B07KYDL79D

Pyle HDMI to DVI (PT265BT)

Pyle HDMI to DVI

The Pyle PT265BT receiver features Bluetooth to stream wireless audio from your device. Play your entire MP3 digital music library from your cell phone, PC or Tablet. This amplifier receiver system features AM/FM radio with 50 station memory presets, digital LCD display, two microphone inputs with separate volume, bass, treble and echo controls -- to create a unique mixing experience. Create an instant karaoke party when you mix the two microphones over any audio that plays through the system -- sing along with your favorite radio station or Bluetooth wireless streaming audio from your device. You can also connect additional external devices like a CD player or another receiver through the AUX inputs. Upgrade your home entertainment system with the ability to turn any time into Karaoke time with the PT265BT Amplifier Receiver.

  • Brand: Pyle
  • ASIN: B00LI4L1XC
  • UPC: 780320067210

Telephone Access Module PRS2403

Telephone Access Module

- Loop start ground start and station port (90V ring up) portability- 600-ohm output- Pre-announce and confirmation tones (defeatable)- Adjustable tone volume- Works with paging only and two-way (talk back) systems- Background music input with volume contra

  • Brand: Bogen
  • ASIN: B004K33VH2
  • UPC: 754262005142

Mean Well, LPV-35-24, LED Driver, Input: 90-264Vac; Single Output 35W 24Vdc

Mean Well, LPV-35-24, LED Driver, Input: 90-264Vac; Single

LED Driver Mode: Constant Voltage Input Voltage: 90-264Vac Output Current: 0-1.5A Output Voltage Max: 24Vdc Rated power: 36W Dimensions: 148x40x30mm Dimming Control Type: PWM Efficiency: 85% No. of Channels: 1 No. of Outputs: 1 Operating Temperature Max: 70°C Operating Temperature Min: -25°C Operating Temperature Range: -25°C to +70°C Power Supply Mounting: Chassis Power Supply Output Type: Adjustable, Fixed Termination Style: Flying Leads, approx. 600mm

  • Brand: MEAN WELL
  • UPC: 886674611434
Similar Amplifier Input Modules Results