8 Ohm Speaker Soak Guitar Amp Power Tube Mass/brake Attenuator for Fender Hot Rod Deluxe

8 Ohm Speaker Soak Guitar Amp Power Tube

Guitar amps sound best when turned up LOUD! That is when we really start to hear all the richest harmonic overtones and feel the most dynamic response from the power tubes but thats alwayys TOO loud so we must compromise and turn down, losing that sweet tone...well, compromise no more, Carl's Custom Guitar's Speaker Soak allows you to dial in your favorite full volume tones and then attenuate the volume (without losing that great tone!) before it hits the speakers, all the way down to safe "bedroom" volumes if need be, simply insert this device between your amplifier's speaker output and the speaker itself (out from amp's speaker output into IN on the Speaker Soak, OUT from Speaker Soak to the speaker, using speaker cables) turn the Speaker Soak up all the way, dial in your favorite full volume sound and then rolllllllll back the volume on the Speaker Soak, preserving all that rich tone at lower volumes! Some technical notes here: it is quite normal for this device to get warm, basically the more volume you are attenuating the warmer it will be so just give it a little breathing room on top of your amp or whatnot. It should never get HOT. Do not use this device on amps over 50 watts and be SURE you match ohm rating of your Speaker Soak with that of your amp's output (in other wor...

  • Brand: Carl's Custom Guitars
  • ASIN: B00A6VON2Y
  • UPC: 091037479389

KLD/PAN AMPS NEW PB-1 100 WATT ATTENUATOR SAVE YOUR CRANKED TUBE TONE NEW!!

KLD/PAN AMPS NEW PB-1 100 WATT ATTENUATOR SAVE

This is the new PB-1 100 Watt Attenuator Attenuation: This is a rotary switch that selects the amount of attenuation. Min position is true by¬pass. Positions 4-1 adds 1.8 dB of attenuation per click. Studio Level: A rheostat that will adjust the amp's output from -7.2 dB down to -30 dB. The PB1 attenuator was designed to let you maintain your amp's tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created, while keeping the overall volume under control.On stage, at home jamming or especially in home studios to really attenuate the overall volume down to 1 watt or less (amp less 100w) The PB1 gives you unlimited flexibility for different volume levels. The PB-1 is designed for up to 100 watt max tube amplifiers only. This is a resistor-based model like Dr. Z and other quality attenuators that hooks in line from the speaker to the head not in the effects loop etc. Note*** always use a quality 16 gauge or better speaker cable for this connection. This model will also work with any ohm speaker rating. All alloy case lets the PB attenuator dissipate heat very easily. Top Controls: Attenuation: This is a rotary switch that selects the amount of attenuation. Mini position is true by¬pass. Positions 4-1 adds 1.8 dB of attenuation per click...

  • Color: Blue
  • Brand: KLD
  • ASIN: B009DUH4E8
  • UPC: 060920781014

Tone King Ironman II Mini 30-watt Reactive Power Attenuator

Tone King Ironman II Mini 30-watt Reactive Power

Passive 30W Tube Guitar Amplifier Attenuator Pedal with Line Output, 8-ohm Operation, and Footswitchable Boost

  • Brand: Tone King
  • ASIN: B01K8VT3MG
  • UPC: 763815129730

Rivera RockCrusher Power Attenuator

Rivera RockCrusher Power

The RockCrusher is invaluable and unbeatably versatile because you can place it between your amp and speaker cab as a power attenuator, or use it in place of your speaker cabinet as a load box while sending its balanced XLR or unbalanced line out to another amp as a slave, or even send its output to a mixer for recording or live performance.In addition to providing superior tone, impedance matching is critical for your tube amp s health and longevity. The RockCrusher has an 8/16-ohm selector switch so you can use either value to accurately match your cabinets and amplifiers. For bypass on the fly, which lets you use the amp with a speaker cabinet when full output level is desired, Rivera included a front-panel full bypass switch that removes the load entirely. When low speaker volume is desired, there is a Studio position of the Attenuator Level Selector that enables the Studio Level control to adjust from low to quiet output perfect for home, project, and studio recording. Balanced XLR and unbalanced phone jacks with a convenient front-panel level control allow interfacing with practically any audio equipment. Two Speaker jacks allow easy connection with up to two speaker enclosures. Bullet-proof construction, a standard feature of Rivera equipment, is also engineered into the R...

  • Brand: Rivera
  • ASIN: B005HYLCNI
  • UPC: 889406646612

Carl's Custom Guitars Volume Box Guitar Amp Attenuator/Power Soak/Plate/Mass/Hot/Pad

Carl's Custom Guitars Volume Box Guitar Amp Attenuator/Power

The Volume Box lets you expand your amp's range of usable volume & dial in much more "open" & "driven tube" tones at lower/more manageable volumes (without driving your neighbors crazy!). It adds another much more responsive audio taper volume control to the circuit of your amp by simply plugging into the effects loop, no mods required whatsoever and no danger of harming your amplifier. It solves the problem of an EXTREMELY touchy volume knob on your amp, you know what I mean: zero has no volume but 1 or 2 is already MUCH too loud. The Volume Box takes care of that with its nice smooth Audio Taper Control, DEFINITELY the most cost effective investment you can make for your amp, A great way to discover a whole new range of tones on your amplifier! Simply plug it into the effect loop on your amp (thats the preamp out and power amp in jacks, you need a series effects loop for this device, it does not go between amp and speaker) and turn the amp UP and then adjust the overall volume with the volume box...this allows you to get more of that wide open tube tone at nice safe levels, it really works great! Works on all amplifiers (tube and solid state even) with a standard (series) effects loop regardless of ohm load/power rating/impedance! A must have secret weapon every guitarist shoul...

  • Brand: Carl's Custom Guitars
  • ASIN: B004ZH0PPY
  • UPC: 013964543797

Rivera Mini RockRec Loadbox w/Built in Cab Simulator

Rivera Mini RockRec Loadbox w/Built in Cab

The Mini Rockrec is a load box and speaker emulator that provides the safest load for you tube amp and gives the best sounding authentic analog guitar tones direct! Featuring 6 sought after voicings, 4/8/16 ohm selector for a perfect match with any amp, direct out, direct EQ bypass out and headphones out for late night jamming. Overbuilt with mega thermal capacity to easily handle up to 300watts of tube power with ease. MADE IN THE USA Some 100watt tube amps actually can hit 170watts when maxed out. The Mini Rockrec can handle the power with ease while keeping the impedance tolerances tight. Even SVT owners can ditch their cabinet and safely load their 300watt amp when in the 4 or 16ohm position. Front of house mixers will love getting your amps authentic tone direct without having drums and bass bleeding into the mike on a cabinet, causing a poor mix. You can also get amazing tones direct for home recording with 6 sculpted voices to choose from. The Mini Rockrec also allows you to run two outs simultaneously, one with the EQ and one without. This allows you to record one track with the Rockrec's EQ and one with EQ bypassed to use with your favorite cabinet modeling software. The Mini Rockrec also features a Headphones out for late night jamming with your favorite tube amp.

  • Brand: Rivera
  • ASIN: B01M4KYCK2
  • UPC: 978598787248

Weber Speakers Amp Attenuator Mass III

Weber Speakers Amp Attenuator Mass

This MASS is unique in that it has an actual tone stack for the speaker signal -- BASS - MIDS - TREBLE. It also has the internal speaker motor for the load, and has a variable line out signal with volume and tone. The unit has two speaker output jacks to support multiple cabinets. The three tone controls can take the signal from whisper quiet to full on with slight humps in the bass, mids, and treble. Additionally, the MASS III has an active bypass circuit with a footswitch so you can run attenuated or bypassed. The footswitch has a 12' cable, and the power pack for the switching relays is a 6VDC wall wart. With no power applied, the attenuator is engaged. Like all Weber attenuators, you can turn all attenuator controls to zero, pull the speaker, and just use the line out, making the MASS III an (expensive) dummy load.

  • Color: Black
  • Brand: Weber
  • ASIN: B00JJU0CJ6
  • UPC: 634385951604

KLD NEW PB-1/ATP 100 100 WATT ATTENUATOR SAVE YOUR CRANKED TUBE TONE RED BURST CASE COLOR!

KLD NEW PB-1/ATP 100 100 WATT ATTENUATOR SAVE

NOW FOR A LIMITED TIME.... FREE QUALITY SPEAKER CABLE INCLUDED! Attenuation: This is a rotary switch that selects the amount of attenuation. Min position is true bypass. Positions 4-1 adds 1.8 dB of attenuation per click. Studio Level: A rheostat that will adjust the amp's output from -7.2 dB down to -30 dB. The PB1 attenuator was designed to let you maintain your amp's tube tone at higher volumes where the tubes really start to sing and great dynamic responses are created, while keeping the overall volume under control.On stage, at home jamming or especially in home studios to really attenuate the overall volume down to 1 watt or less (amp less 100w) The PB1 gives you unlimited flexibility for different volume levels. The PB-1 is designed for up to 100 watt max tube amplifiers only. This is a resistor-based model like Dr. Z and other quality attenuators that hooks in line from the speaker to the head not in the effects loop etc. Note*** always use a good quality gauge speaker cable for this connection. This model will also work with any standard ohm speaker rating 4-16 ohms. (Plug and Play) All alloy case lets the PB attenuator dissipate heat very easily. Top Controls: Attenuation: This is a rotary switch that selects the amount of attenuation. Mini position is true by¬pass. Po...

  • Color: Red Burst
  • Brand: KLD/Pan Amps
  • ASIN: B0778ZF4K9
  • UPC: 645465963509

Tone King Ironman II 100-watt Reactive Power Attenuator

Tone King Ironman II 100-watt Reactive Power

100-watt Precision-compensated Reactive Power Attenuator with DI Output, Analog Cabinet Simulation, Dual Impedance Controls, Solo Mode, Presence Switch, Bypass Mode, and Line Output

  • Brand: Tone King
  • ASIN: B07PXVLFDS
  • UPC: 763815130330

Attenuator - Recycled Sound, Power Plug LITE

Attenuator - Recycled Sound, Power Plug

Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.

  • Brand: Recycled Sound
  • ASIN: B00C7W81P0
  • UPC: 609722143776
Similar Amplifier Power Attenuator Results