Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier

Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna

Winegard LNA-200 Boost XT TV Preamplifier, VHF UHF Amplifier Extend the range and signal quality of your non-amplified digital HDTV antenna with a Winegard TV antenna preamplifier. Winegard's ultra low-noise amplifiers offer maximum signal quality. Watch more free shows than ever before! Boost Clear Circuit Technology features the lowest noise figure (1 dB typical) to deliver more range and reduce signal dropout and pixelation. The Boost XT enhances any non-amplified antenna! TwinAmp Technology separately amplifies VHF and UHF signals. This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation, thereby maintaining the purest signal path possible. Size, Compatibility and Features Dimensions: 6in x 4in x 4.8in TwinAmp Technology separately amplifies VHF and UHF signals 10x more power handling Bandpass filters remove interfering RF signals Installs on any outdoor non-amplified TV antenna Maximum Gain (typical): 20 dB Noise Figure (typical): 1dB Power: +5V at 130mA In The Box LNA-200 Boost XT Preamplifier 110V Adapter, Power Inserter, Hose Clamps Printed Documentation Note:  Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified. The TV channels available in your area dep...

  • Color: Black
  • Brand: Winegard
  • ASIN: B00DQN3R9O
  • UPC: 012301815429

Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal Booster, HD Digital VHF UHF Amplifier, Indoor HDTV Ultra Low Noise Amp (USB Power Supply) - USA

Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal

Winegard LNA-100 Boost Indoor Digital TV Antenna Amplifier The LNA-100 indoor amplifier increases range and delivers a crystal clear TV signal to HDTVs so viewers can get more broadcast TV channels in high definition than with an antenna alone. Using the latest advances in amplifier technology, Boost enhances any indoor non- amplified antenna, delivering more range and available channels. In The Box - LNA-100 Boost Indoor Digital TV Antenna Amplifier - USB Power Cable - 110V Adapter - Printed Documentation Size, Compatibility and Features - Dimensions: 8.5" x 0.8" x 1.5" - Boost any Non-Amplified TV Antenna - Minimize Pixelation and Dropouts - Receive More Channels - Gain (typical): 20 dB - Noise Figure (typical): 1dB - Power: +5V

  • Color: White
  • Brand: Winegard
  • ASIN: B00BN5Z2UY
  • UPC: 809387603237

4 Port DTV Distribution Amplifier - CDA4

4 Port DTV Distribution Amplifier -

Splitting the signal to more than one TV? The 4-Output Distribution Amplifier will help overcome signal loss. The CDA4 boosts signal to be split to 4 TV's or a digital converter box.

  • Color: apple
  • Brand: Antennas Direct
  • ASIN: B0082ZJNW6
  • UPC: 012301768480

Antennas Direct ClearStream Juice VHF/UHF Preamplifier System

Antennas Direct ClearStream Juice VHF/UHF Preamplifier

Why do you need JUICE? Adding an amplifier to an antenna increases available signal strength. The extra JUICE will help overcome challenges including coaxial cables over 100ft, splitters, or weak signals in the area. This VHF / UHF preamplifier system offers ample gain and best-in-class overload protection for dependable reception in urban, suburban, or rural areas. The JUICE has an integrated low pass filter that rejects interference from cellular and wireless data services and offers maximum signal to noise for clean, efficient signals. As a leader in cutting-edge antenna technology, Antennas Direct is dedicated to providing superior products supported by a 90 day warranty and a world class call center located in St. Louis, MO. Includes JUICE VHF / UHF preamplifier, power supply, power inserter, 2/ea. x 36in coaxial cables, 2/ea. zip ties, and instructions.

  • Color: BLACK
  • Brand: Antennas Direct
  • ASIN: B00SVV2O6S
  • UPC: 631805468247

1byone TV Antenna, 50 Mile Range Amplified HDTV Antenna with Detachable Amplifier Signal Booster, USB Power Supply and 10 Feet Highest Performance Coaxial Cable-Black

1byone TV Antenna, 50 Mile Range Amplified HDTV

1byone Super Thin Indoor HDTV Antenna:Our Super Thin Antenna is specially designed for receiving digital over-the-air (OTA) TV broadcasts from all your local television stations. So never pay hugely expensive cable or satellite fees again and get all your local channels in crystal clear quality, absolutely free.At 1byone, we create lasting products that help people benefit from the power of technology and make life better, easier and more fulfilling. Come join our family with over 5 million satisfied customers and counting! Indoor HDTV Antenna Features:1). Excellent reception on all FM/VHF/UHF channels.2). Can be safely painted to match any home décor without affecting reception or resulting in signal loss.3). The super soft, unobtrusively thin design and powerful reception capabilities make this antenna a top choice for any home.4). Fast and easy setup in 3 steps: a. Connect the antenna to “CABLE/ANT IN” on the back of any HDTV. b. Place the antenna in an optimal position, usually on a wall or window.c. Scan for channels using your TV's 'Channel Search' and be ready to enjoy free TV!Indoor TV Antenna Specifications:Frequency range: 47-230MHz, 470-862MHzReceiving range: FM/VHF/UHFGain: 28dBOutput Level:100dBμVImpedance: 75ΩNoise figure: ≤3dBPower Supply: Via USB Power Ad...

  • Color: Black
  • Brand: 1byone
  • ASIN: B00IF70T4M

BTECH AMP-V25 Amplifier for VHF (136-174MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola

BTECH AMP-V25 Amplifier for VHF (136-174MHz), 20-40W Output

Technical Details: Frequency range: ◦ AMP-V25 : 136 – 174 MHz Power supply: 13.8 VDC (15%), 5.5 A maximum Input RF power: 2 - 6W (10%) Output RF power: 20 - 40W Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H) Net weight: 1.8 lbs. (800 g) The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors. Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier. Transmitting without an antenna or dummy load may cause harm to the radio equipment. When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with...

  • Color: Black
  • Brand: BTECH
  • ASIN: B076H972DH
  • UPC: 722589228919

Antra AT-PAA28 Low Noise Pre-Amplifier HDTV Pre-amp Signal Booster with LTE 4G Filter for UHF VHF Antenna Adjustable Gain Excellent for Weak Signal Regions

Antra AT-PAA28 Low Noise Pre-Amplifier HDTV Pre-amp Signal

This low noise broad band Pre-amp AT-PAA28 is designed to boost weak TV signals to compensate the signal loss of long running cable and noise of the receivers. TV signals are very complicated and different from location to location. Do some research on TVFOOL, and get basic channel/signal information of your location before buying an pre-amp. Scenarios and results you may get: 1. Weak signal only (You may see great results using this Pre-Amp, EASY) If your location are far from TV stations or you can get very weak signal even by a high gain antenna. Basic setup as per instructions are sufficient. 2. Some directions have strong signals and some directions have weak signals.(You may see good results when tuning the antenna system well, EASY-ADVANCED) Try to point the antenna (Single antenna system) to the weakest stations, in this way more weak signals and less strong signals are received in the system. If multi-antenna system is used, use higher gain antenna to get weak channels and connect to the amplifier, and low gain antenna to get strong channels without amplification. Signal combiner may be required to get best results; 3. Weak signals among lots of strong signals and are coming from the same direction(Complicated and special setup may be required to get weak channels extrac...

  • Brand: Antra
  • ASIN: B008NC8IB0
  • UPC: 874392000005

Skywalker Signature Series SKY38323 25dB Amplifier VHF/UHF/FM w/variable gain (SKY38323)

Skywalker Signature Series SKY38323 25dB Amplifier VHF/UHF/FM w/variable

The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain via a control on the front panel (up to 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made using standard F type connectors for the in/out ports. Contains a built in power supply that is designed to connect to a standard 120 volt/ 60hz AC outlet. An on/off status light is visible on the front panel. Features: Enjoy the control of variable gain (with up to 25dB of gain) in VHF / UHF / FM bands. Low operation interference and minimal noise production & adjustment gain control Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB Heavy-duty metal housing with built-in mounting screw holes & power indicator light Please note: When using this product a proper signal path must be established. System With No Pre-Amplifier: The SKY38323 must be installed immediately before any distribution splitter that supplies signals to your TV's. The proper signal path is: Antenna> coax> amplifier> splitter> TV's. System With Pre-Amplifier: The SKY38323 must be installed after the power inserter that supplies voltage to your preamp. Failure to do this correctly will block the DC voltage from...

  • Brand: Skywalker
  • ASIN: B008UDF55E
  • UPC: 610370581759

Channel Master CM-3410 1-Port Ultra Mini Distribution Amplifier for Cable and Antenna Signals

Channel Master CM-3410 1-Port Ultra Mini Distribution Amplifier

Channel Master distribution amplifiers, manufactured by Channel Master's former parent company, PCT International, one of the leading manufacturers in the cable telecommunications industry, will boost your digital TV and HDTV signals, increasing their overall signal strength. They have a miniature design which will give you more space to relieve congested installs when space is at a premium. Channel Master distribution amplifiers are professional grade and meet stringent US and international standards, including those developed by the Society of Cable Telecommunications Engineers (SCTE), who creates international standards for many TV signal distribution products. Channel Master distribution amplifiers can be used in HDTV, CATV, off air, analog and digital RF distribution applications where high performance and reliability are required. The CM 3410 is a high quality ultra mini single output digital TV amplifier with passive return, which means the distribution amplifier does not have any amplification for signals in the return path frequency range (5 42 MHz). This frequency range is used in cable telecommunications networks to allow cable modems and set top boxes to communicate back through the cable network. Passive return amplifiers are the most commonly used in house distribut...

  • Color: White
  • Brand: Channel Master
  • ASIN: B001FY0B90
  • UPC: 749860022332

EEEKit HDTV Antenna Amplifier Signal Booster High Gain Low Noise for TV HDTV Antenna with USB Power Supply

EEEKit HDTV Antenna Amplifier Signal Booster High Gain

Please note that EEEKit and are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or to ensure authenticity and better service.Kindly Note: We do not recommend using this amplifier if your house is very close to the broadcast tower and the signal is already very strong.The amplifier may cause self-oscillations and result in fewer signals received.Package Includes: 1 x TV Amplifier Signal Booster for Antenna.How to set up?: 1.Screw antenna's F type into amplifier's F Female connector 2.Screw amplifier's Coax cable into ANT/IN port on the back of HDTV or set top box 3.Plug USB cable into your TV or a wall outlet 4.Follow your antenna's instruction and enjoy free TV channelsProduct Specification: Frequency: 45-862 MHz Cable Length: about 80cm / 31.50in LNA Gain: 25dB Output Degree: 100dBuV Noise Parent: Less than 4dB Energy Supply: DC 6V 100mA by outside adapter or DC 5V from USB source Works with any non-amplified / passive television antennas Material: ABS Net weight: 1.5oz(45g)

  • Color: 1-pack
  • Brand: EEEKit
  • UPC: 715444512780
Similar Amplifiers Vhf Antennas Results