Icstation 4-20mA to 0-5V Current to Voltage Converter Isolated I/V Conversion Module

Icstation 4-20mA to 0-5V Current to Voltage Converter

In the process of signal transmission circuit, voltage signal will become weak with the increase of transmission distance,the transmission can be avoided using weak electric current signal.V/I converter module is designed to transform the input voltage into the current signal output widely used in the industrial instrument for long distance signal transmission. This module is used for the end of the current signal transmission, the signal is converted into a voltage signal for microcontroller testing. Specifications: Working Voltage: DC 12-30V Output Voltage Signal: DC 0-5V Intput Current Signal:4-20mA Accuracy:¡À2% Response Time:10mS Module Size:45 X 25 X 18mm/1.77 X 0.98 X 0.71inch(L*W*H) Package Included: 1X 4-20mA to 0-5V I/V Converter Output Single Range Adjustment:Provide 20mA current signal input,then regulate the potentiometer enable the output voltage signal reach 5V, then its working range is 4-20mA to 0-5V.

  • Brand: IS
  • ASIN: B01KA4C2SS

Hilitand 0-10V Dual Channel Analog Quantities Voltage Signal Isolation Transmission Module

Hilitand 0-10V Dual Channel Analog Quantities Voltage Signal

Features: This isolation module need two complete independent DC12-32V power supply. Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal. Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system. It will has better performance if install this module and controller in a metal box and box is grounded. The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated. Specifications: Model: S-10V10V (single channel input) Power Supply: 12V-32VDC Input: 0-10V analog voltage signal Output: 0-10V analog voltage signal Conversion Accuracy: ±3% Conversion Speed: ≥200MS Size: 8.5*3.5*2.8cm/3.3*1.4*1.1in Weight: 39g(approx.) Wiring: 1) Input Voltage Terminals: HVIN: 12V-32V power supply positive HGND: 0V power supply negative AI1: Analog input first channel (0-10V voltage) AI2: Analog Input second channel (0-10V voltage)   2) Output Voltage Terminals: VIN: 12-32V power supply positive GND: Power supply negative A1O: An...

  • Color: default
  • Brand: Hilitand
  • ASIN: B07GBV98S3
  • UPC: 700890317249

0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage Signal Isolation Module for PLC/MCU Isolating High Voltage or Current (Voltage) Signals

0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage

Specifications: Model: S-10V10V (single-channel input) Power supply: 12V-32VDC Input: 0-10V analog voltage signal Output: 0-10V analog voltage signal Conversion accuracy: ± 3% Conversion rate: ≥200MS Size: 8.5 * 3.5 * 2.8cm / 3.3 * 1.4 * 1.1 inches Weight: 39g (approx.) Wiring: 1) Input voltage connections: HVIN: 12V-32V power supply positive HGND: 0V power supply negative AI1: analog input first channel (0-10V voltage) AI2: Analog input second channel (0-10V voltage)   2) Output voltage connections: VIN: 12-32V power positive GND: power supply negative A1O: Analog output first channel (0-10V voltage) A2O: Analog output second channel (0-10V voltage) Package includes: 1 x insulation module

  • Brand: Vikye
  • ASIN: B07RGWJC26
  • UPC: 750086377526

ASI ASI451124 Single Channel Dual Output Analog Signal Isolator Transmitter Splitter, 3-Way Isolation, DIN Rail Mount, Single 4-20 mA Input, Dual 4-20 mA Output

ASI ASI451124 Single Channel Dual Output Analog Signal

The ASI451124 is a DIN rail mounted analog signal isolator transmitter splitter with a single circuit input of 4-20mA and a dual 4-20mA output that provides electrical isolation between the input, output and power circuits. The analog signal splitter isolator can be mounted directly in the control panel or remotely near the field devices due to the high level of isolation. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems associated with ground loops, transient and unwanted noise interference. The Zero and Span adjustments are provided for precise calibration after installation and for long term service. The ASI analog signal splitter isolator transmitter has been designed to compensate for load variations and the compact 17.5mm wide housing will save space in your control panel. Loop powered, multi-channel and splitters are also available along with user programmable models. Designed with pluggable terminals for easy installation and removal.

  • Brand: Automation Systems Interconnect
  • ASIN: B00PH0AUJO
  • UPC: 813101026271

Isolation Module, 0-10V Analog Quantities Voltage Signal Isolation Module, S-10V10V for PLC/MCU Isolation Module

Isolation Module, 0-10V Analog Quantities Voltage Signal Isolation

Features: This isolation module need two complete independent DC12-32V power supply. Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal. Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system. It will has better performance if install this module and controller in a metal box and box is grounded. The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated. Specifications: Model: S-10V10V (single channel input) Power Supply: 12V-32VDC Input: 0-10V analog voltage signal Output: 0-10V analog voltage signal Conversion Accuracy: ±3% Conversion Speed: ≥200MS Size: 8.5*3.5*2.8cm/3.3*1.4*1.1in Weight: 39g(approx.) Wiring: 1) Input Voltage Terminals: HVIN: 12V-32V power supply positive HGND: 0V power supply negative AI1: Analog input first channel (0-10V voltage) AI2: Analog Input second channel (0-10V voltage)   2) Output Voltage Terminals: VIN: 12-32V power supply positive GND: Power supply negative A1O: An...

  • Brand: Walfront
  • ASIN: B07CGD2CHS
  • UPC: 654936923904

Opto 22 SNAP-AIVRMS-i - SNAP Analog Input Module, 2 Isolated Channels, 0-250 V RMS AC/DC Input

Opto 22 SNAP-AIVRMS-i - SNAP Analog Input Module,

The SNAP-AIVRMS-i module provides two isolated channels with an input range of 0 to 250 volts AC or DC. The SNAP-AIVRMS-i module may be used to monitor 120/240-volt AC/DC and 12/24/48-volt AC/DC system voltage and is ideal for differential voltage measurements. The two channels are isolated from each other; they do not share any field connection. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired model or a Wired+Wireless model. SNAP analog input modules have an onboard microprocessor to provide module-level intelligence, which makes them an ideal choice for Original Equipment Manufacturers (OEMs).IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement

  • Brand: Opto 22
  • ASIN: B0058V02K4

ASI ASI451119 Single Channel Analog Signal Isolator Transmitter with 3-Way Isolation, DIN Rail Mount, 4-20 mA Input, 4-20 mA Output

ASI ASI451119 Single Channel Analog Signal Isolator Transmitter

The ASI451119 is a DIN rail mounted analog signal isolator transmitter for standard 4-20mA control circuits that provides electrical isolation between the input, output and power circuits. The analog signal isolator can be mounted directly in the control panel or remotely near the field devices due to the high level of isolation. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems associated with ground loops, transient and unwanted noise interference. The Zero and Span adjustments are provided for precise calibration after installation and for long term service. The ASI analog signal isolator transmitter has been designed to compensate for load variations and the compact 17.5mm wide housing will save space in your control panel. Loop powered, multi-channel and splitters are also available along with user programmable models. Designed with pluggable terminals for easy installation and removal.

  • Brand: Automation Systems Interconnect
  • ASIN: B00PH0ATMW
  • UPC: 813101026264

Advanced Control Technologies, Inc. (ACT) AIM1 AIM1 1 to 1 Analog Isolation Module

Advanced Control Technologies, Inc. (ACT) AIM1 AIM1 1

1 to 1 analog isolation module

  • Brand: Advanced Control Technologies, Inc. (ACT)
  • ASIN: B079Q65GZF

Diymore 4 Channels 4 Route MOSFET Button IRF540 V2.0 + MOSFET Switch Module for Arduino

Diymore 4 Channels 4 Route MOSFET Button IRF540

Specification: MOSFET is an electronic devices with good switching characteristics. It is widely used in circuits, such as power supplies switching ,motor drives, lighting dimmer and so on. Relay is another kind of module with switching characteristics. Since relay works relying on mechanical contacts to open or shut. In this way it will inevitably lead to relay's stopping working while switching time is too short.And papa sound made by relay in some situations is annoying. We designed a 4-channel MOSFET switch. It can supply up to four groups of electronic switches to control different circuit blocks respectively. Limited by the working priciples, MOSFET can only be used to control the DC circuit, such as DC-LED screen and so on, but not suitable for AC circuit control. In some extreme cases, it can be used to control 100V/33A DC circuit. However, it is suggested that the controlled DC voltage is more than 9V. Shipping Included:1pcs* 4 Channel 4 Route MOSFET Button IRF540 V2.0 + MOSFET Switch Module for Arduino

  • Brand: diymore
  • ASIN: B01MRQFYJN
  • UPC: 707427338142

Fevas !!! Single Analog Isolation Transmission Module Turn 0-5V to 0-5V Module Sensor

Fevas !!! Single Analog Isolation Transmission Module Turn

Single  analog isolation transmission module turn 0-5V to 0-5VProduct DescriptionPower: DC12-32V power supply.Function: Input 0-5V analog voltage signal, after isolation, output 0-5V analog voltage signal. Conversion Accuracy ± 3%, the conversion rate ≥200MS.Purpose: The high pressure or high interference voltage or current terminal (voltage) signal isolation to the PLC or controller MCU of the control terminal and controlled end isolation, in order to ensure stability and anti-jamming capability. Metal shield box, case under the earth, the better if the module is installed in the controller.Potentiometer board is used to modify the voltage of the correspondence between the conversion. You can fine-tune the factory we have corrected good, generally do not manage to.Each terminal has a marked edge.AI1: Analog input of the first pathAI2: Analog input second pathAO1: analog output of the first pathAO2: analog output of the second pathGNG: 0V PowerV +: 12-32V Power Welcome to our shop, enjoy the shipping here, you can contact with me freely if any question, usually we will send datasheet,code via email . hope to do business with you. Shipping: We Ship to Worldwide, but Italy, Nigeria, Brazil will take long delivery time . we advise shipping by DHL or EMS,and we have gave a dis...

  • Brand: Fevas
  • ASIN: B07TPH4VQY

ASI x756526 Slim Line Single Channel Loop Powered Analog Signal Isolator Transmitter for 0-20 or 4-20 mA Control Loops, DIN Rail Mount, 1.5 kVAC Isolation

ASI x756526 Slim Line Single Channel Loop Powered

The ASI X756526 is a loop powered analog signal isolator for 0 to 20mA and 4 to 20 mA control loop circuits. It is only 6.2mm wide. No separate power supply is required since it can be used in circuits where the sensor is getting its power from the control loop. The unit is factory calibrated to allow for quick and easy installation and the galvanic isolation eliminates problems associated with ground loops, transient and unwanted noise interference. The ASI slim line analog signal splitter isolator transmitter has been designed to compensate for load variations and the space saving 6.2mm wide housing will save space in your control panel. Standard 24Vdc, multi-channel and splitters are also available along with user programmable models. Designed with pluggable terminals for easy installation and removal.

  • Brand: Automation Systems Interconnect
  • ASIN: B00PH0B3DQ
  • UPC: 813101026233

Opto 22 SNAP-AIMA - SNAP Analog Current Input Module, 2-Channel, -20mA to +20mA Input

Opto 22 SNAP-AIMA - SNAP Analog Current Input

The SNAP-AIMA provides two channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired model or a Wired+Wireless model. SNAP analog input modules have an onboard microprocessor to provide module-level intelligence, which makes them an ideal choice for Original Equipment Manufacturers (OEMs).Underwriters Laboratory, Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement

  • Brand: Opto 22
  • ASIN: B0058UZFF2

Opto 22 SNAP-AIV - SNAP Analog Input Module, 2-Channel, -10 VDC to +10 VDC or -5 VDC to +5 VDC Input

Opto 22 SNAP-AIV - SNAP Analog Input Module,

The SNAP-AIV provides two channels of analog voltage input, either -10 to +10 VDC or -5 to +5 VDC. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired model or a Wired+Wireless model. SNAP analog input modules have an onboard microprocessor to provide module-level intelligence, which makes them an ideal choice for Original Equipment Manufacturers (OEMs).Underwriters Laboratory, Factory Mutual, Canadian Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement

  • Brand: Opto 22
  • ASIN: B0058UZXPY
  • UPC: 013227041275

Opto 22 AD10T2 G1 RTD Analog Input Isolated Module, 100 Ohm, Accuracy +/- 0.4 degreeC

Opto 22 AD10T2 G1 RTD Analog Input Isolated

The AD10T2 modules provide a single channel of optically-isolated RTD temperature-to-digital conversion with 4,000 Vrms of transient isolation. Modules plug into any Standard Analog I/O rack and are secured by a captive screw. Field connections to the modules are made via a terminal on the base of the analog I/O rack and two terminals on the top of the I/O module. The AD10T2 modules are suitable for temperature measurements where the RTD probe is grounded or when ground loop currents exist.IEC 950: 1991-09, 89/336/EEC

  • Brand: Opto 22
  • ASIN: B0058UXPEK

Opto 22 SNAP-AIV-i - SNAP Analog Voltage Input Module, 2 Isolated Channels, -10 VDC to +10 VDC or -5 VDC to +5 VDC Input

Opto 22 SNAP-AIV-i - SNAP Analog Voltage Input

The SNAP-AIV-i provides two isolated channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or for -5 to +5 VDC operation. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices. SNAP analog input modules are part of Opto 22’s SNAP PAC System. These modules mount on a SNAP PAC rack with a SNAP PAC brain or R-series controller, either a standard wired model or a Wired+Wireless model. SNAP analog input modules have an onboard microprocessor to provide module-level intelligence, which makes them an ideal choice for Original Equipment Manufacturers (OEMs).Underwriters Laboratory, Factory Mutual, Canadian Factory Mutual, IEC 950: 1991-09, 89/336/EEC, 2002/95/EC, Defense Federal Acquisition Regulation Supplement

  • Brand: Opto 22
  • ASIN: B0058V01TG
Similar Analog Isolation Module Results