Anderson Compression Connector

Anderson Compression

Sold as one unit. (1 unit = 10 each.) Compatible with copper, brass, aluminum and plastic tubing. Air, oil, water & gas 400 PSI max. Yellow brass. Bagged. 1/2"Tube x 3/8"MPT . Manufacturer number: AB68A-8C. SKU #: 41245. Country of origin: (TBA). Distributed by Anderson Fittings.

  • Brand: Anderson Fittings
  • ASIN: B000H5ZYRW
  • UPC: 094857081701

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/4" Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare

This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, an...

  • Brand: Anderson Metals
  • ASIN: B001HOSYOC
  • UPC: 719852934967

Anderson Compression Connector

Anderson Compression

Sold as one unit. (1 unit = 10 each.) Compatible with copper, brass, aluminum and plastic tubing. Air, oil, water & gas 400 PSI max. Yellow brass. Bagged. 1/2"Tube x 1/2"MPT . Manufacturer number: AB68A-8D. SKU #: 41246. Country of origin: (TBA). Distributed by Anderson Fittings.

  • Brand: Anderson Fittings
  • ASIN: B000H5MX26
  • UPC: 094857081718

Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression x 1/4" Male Pipe

Anderson Metals Brass Tube Fitting, Connector, 1/4" Compression

Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 7/16"-24 Thread size.

  • Brand: Anderson Metals
  • ASIN: B0044FB02Y
  • UPC: 719852934073

Anderson Metals Brass Hose Fitting, Connector, 3/4" Barb x 3/4" Male Pipe

Anderson Metals Brass Hose Fitting, Connector, 3/4" Barb

This Anderson Metals brass compression hose fitting connector has a male end for connecting to threaded pipe conforming to National Pipe Thread (NPT) standards and a barbed fitting for connecting to a hose. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT connector on the other end connects to threaded pipe to form a tight, fixed connection This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel, and the relative softness of brass threading when compared to other metals allows for a tight seal to resist leaks. This connector has a temperature range from -32 to +140 degrees F and is suitable for use in hydraulic, pneumatic, and plumbing applications.Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

  • Brand: Anderson Metals
  • ASIN: B000BQYCES
  • UPC: 719852936213

Anderson Metals Brass Compression Tube Fitting, Half-Union, 5/8" Flare Tube O.D. x 3/8" Male Pipe

Anderson Metals Brass Compression Tube Fitting, Half-Union, 5/8"

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types ...

  • Brand: Anderson Metals
  • ASIN: B003RW39QK
  • UPC: 719852120575

Anderson Metals Brass Tube Fitting, Elbow, 3/8" Compression x 1/4" Female Pipe

Anderson Metals Brass Tube Fitting, Elbow, 3/8" Compression

The Anderson Metals compression fitting is made of brass and connects to National Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also called "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It connects to pipes or tubing on one end and an NPT female connector on the other. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures range from -65 to 250 degrees F. It is suitable for copper, brass, aluminum, and steel tubing and is for use with water, gasoline, oil, and vacuum lines. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings...

  • Brand: Anderson Metals
  • ASIN: B006PKJNM0
  • UPC: 719852101550

Anderson Metals Brass Garden Hose Fitting, Connector, 5/8" Barb x 3/4" Male Hose

Anderson Metals Brass Garden Hose Fitting, Connector, 5/8"

This Anderson Metals garden hose connector is made of brass and connects hose to a female connector. This coupling has male garden hose threads (GHT) for connecting to a female GHT connector. The barbed stem creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included). This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

  • Brand: Anderson Metals
  • ASIN: B006PKMVYW
  • UPC: 719852118572

Anderson Compression Connector

Anderson Compression

Compression Connector 1/2"Comp X 1/4" MPT

  • Color: Copper
  • Brand: Anderson
  • ASIN: B0044FYT1S
  • UPC: 094857081695

Anderson Power Products 1331-bk 16-12 Ga Pp30 Power Connector Contact 30 Amp-40pack

Anderson Power Products 1331-bk 16-12 Ga Pp30 Power

Anderson Power Products 1331-Bk Powerpole Contacts ; Category: Anderson Connectors ; Manufacturer: Anderson Power Products ; Component Type: Contact ; Series: Powerpole ; Gauge (Awg): 16-12 ; Amp Rating: 30A ; Each Powerpole Anderson Connector Is A Genderless, Single-Pole Connector Half, Which Can Be Dovetailed ; Powerpole Connectors Can Be Stacked Or Used Inline ; 15, 30, And 45 Amp Sizes Use The Same Housings, But Different Contacts ; For A Complete System, Order One Contact With Each Housing ; One Housing Plug Comes With A Latch To Mate With The Other Housing Plug For A Locked Connection ; Place A Spacer Key In An Empty Contact Slot And Secure Assembly With A Retaining Pin.

  • Brand: Anderson Power Products
  • ASIN: B015YT0QD2
  • UPC: 636501200795
Similar Anderson Compression Connector Results