Apollo 70-100 Series Bronze Ball Valve, Two Piece, Inline, Lever, 3/4" NPT Female

Apollo 70-100 Series Bronze Ball Valve, Two Piece,

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. This ball valve is standard (or reduced or regular) port for reduced valve size and cost and has a working temperature range of 0 - 500 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hol...

  • Brand: Apollo Valve
  • ASIN: B000KKQ90U
  • UPC: 670750652110

Apollo 94ALF-100 Series Brass Ball Valve, Potable Water Service, Two Piece, Inline, Lever, 3/4" NPT Female

Apollo 94ALF-100 Series Brass Ball Valve, Potable Water

The Apollo 94ALF-100 series brass two-piece inline ball valve has a lever handle and female National Pipe Taper (NPT) threads on both ends. It is made of brass for higher corrosion resistance than steel, and has a zinc-plated steel lever handle with a PVC (polyvinyl chloride) grip for manual on/off control. The valve materials meet federal and state lead level requirements for use with potable water systems. This valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to for maximum operating efficiency. Polytetrafluoroethylene (PTFE) seats reduce the risk of leakage, and the valve has National Pipe Taper (NPT) threads for creating tighter seals than straight threads. The maximum pressure ratings are 600 pounds per square inch (psi) cold working pressure (CWP) (sizes from 1/4 to 2 inches) and 400 psi CWP (sizes from 2-1/2 to 3 inches), and the temperature range is -20 to 400 degrees Fahrenheit. This ball valve is for use in water lines, processing plants, and agricultural applications and meets standards CA AB1953, VT Act 193, MD HB372, LA HB471, Federal Public Law 111-380, ANSI/NSF 61-8, and MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is ...

  • Brand: Apollo Valve
  • ASIN: B006G07O2U
  • UPC: 670750059414

Apollo 32-100 Series Bronze Ball Valve, Two Piece, Inline, Lever, 1" NPT Female

Apollo 32-100 Series Bronze Ball Valve, Two Piece,

The Apollo 32-100 series two-piece inline ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. It has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This ball valve is standard (or regular) port for reduced valve size and cost. The maximum pressure is 400 pounds per square inch (psi) for cold working pressure (CWP) and 125 psi for steam working pressure (SWP), and the maximum temperature is 400 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) seats and reinforced polytetraflouroethylene (RPTFE) stem packing reduce the risk of valve leakage. This valve is for use in water lines, processing plants, and agricultural applications and meets standards MSS SP-110 and CRN: OC10908.5 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontall...

  • Brand: Apollo Valve
  • ASIN: B0062RXYYE
  • UPC: 670750560736

Apollo 70-100 Series Bronze Ball Valve, Two Piece, Inline, Lever with Nut, 1" NPT Female

Apollo 70-100 Series Bronze Ball Valve, Two Piece,

The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever-handle with a nut and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. It has a zinc-plated steel lever handle with a vinyl sleeve and nut for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when ...

  • Brand: Apollo Valve
  • ASIN: B0062S19JU
  • UPC: 670750653438

Apollo 64-100 Series Brass Ball Valve, Two Piece, Inline, Lever, 1/4" NPT Female

Apollo 64-100 Series Brass Ball Valve, Two Piece,

The Apollo 64-100 series two-piece full port ball valve is made of brass and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of brass for higher corrosion resistance than steel and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 600 pounds per square inch (psi) for cold water pressure (CWP) and the maximum temperature is 366 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) seats reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications and meets standards MSS SP-110 and ANSI/NSF 61 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that th...

  • Brand: Apollo Valve
  • ASIN: B0062Q6Y2O
  • UPC: 670750856266

(5-PK) 1/2" FPT Full Port Ball Valve- Apollo International- Lead Free

(5-PK) 1/2" FPT Full Port Ball Valve- Apollo

The 94ALF Series Ball Valve by Apollo Valves is a lead free forged brass ball valve that combines reliable operation with the utmost economy. The 94ALF Series is ideal to gas, fuels, fire protection and general plumbing and HVAC applications including potable water. Featuring quarter-turn lever handle flow control, the 94ALF Series ball valve is a versatile and reliable ball valve.

  • Color: Bronze
  • Brand: Ohio Supply
  • ASIN: B07SPFWDDF

(2-PK) 2" FPT Full Port Ball Valve- Apollo International- Lead Free

(2-PK) 2" FPT Full Port Ball Valve- Apollo

The 94ALF Series Ball Valve by Apollo Valves is a lead free forged brass ball valve that combines reliable operation with the utmost economy. The 94ALF Series is ideal to gas, fuels, fire protection and general plumbing and HVAC applications including potable water. Featuring quarter-turn lever handle flow control, the 94ALF Series ball valve is a versatile and reliable ball valve.

  • Color: Bronze
  • Brand: Ohio Supply
  • ASIN: B07SSCNCHY

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 1" NPT Female

Apollo 75-100 Series Bronze Ball Valve, Two Piece,

The Apollo 75-100 series two-piece inline ball valve is made of bronze and has a lockable lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel, lockable lever handle that can be locked in the open or closed position using a portable lock (not included). The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked...

  • Brand: Apollo Valve
  • ASIN: B0062RYRFO
  • UPC: 670750691416

Apollo 76F-100-A Series Stainless Steel Ball Valve, Two Piece, Inline, Lever, 1/4" NPT Female

Apollo 76F-100-A Series Stainless Steel Ball Valve, Two

The Apollo 76F-100-A series two-piece full port inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel lever handle with vinyl sleeve for manual on/off control. The ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 1,000 pounds per square inch (gauge) (psig) for cold working pressure (CWP) and 150 psig for saturated steam, and the temperature range is -20 to 450 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and seals reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is b...

  • Color: Stainless-Steel
  • Brand: Apollo Valve
  • ASIN: B0062S10DA
  • UPC: 670750114380

(5-PK) 3/8" FPT Full Port Ball Valve- Apollo International- Lead Free

(5-PK) 3/8" FPT Full Port Ball Valve- Apollo

The 94ALF Series Ball Valve by Apollo Valves is a lead free forged brass ball valve that combines reliable operation with the utmost economy. The 94ALF Series is ideal to gas, fuels, fire protection and general plumbing and HVAC applications including potable water. Featuring quarter-turn lever handle flow control, the 94ALF Series ball valve is a versatile and reliable ball valve.

  • Color: Bronze
  • Brand: Ohio Supply
  • ASIN: B07SVHF4XC

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 3/4" NPT Female

Apollo 71-500 Series Bronze Ball Valve, Two Piece,

The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a stainless steel spring-close handle with a vinyl sleeve for manual on/off control. This valve closes automatically when its spring-close lever is released, ensuring that the valve is only open when an operator is at hand. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Multifill polytetrafluoroethylene (mPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the val...

  • Brand: Apollo Valve
  • ASIN: B0062RYGHI
  • UPC: 670750679827

Apollo 80-100 Series Bronze LP-Gas Ball Valve, Two Piece, Inline, Lever, 3/4" NPT Female

Apollo 80-100 Series Bronze LP-Gas Ball Valve, Two

The Apollo 80-100 series two-piece inline LP-Gas ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. The valve body is made of bronze for higher strength and corrosion resistance than brass and it has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. This valve is listed with Underwriters Laboratory (UL) for safe use with liquefied petroleum gas (LP-Gas), natural gas, flammable liquids, and heated oils. The maximum pressure is 600 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG) and 250 for liquefied petroleum gas (LP-Gas). The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. This ball valve has large ports to reduce drops in pressure and has reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal to reduce the risk of valve leakage. This valve is for use with LP-Gas lines, water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with t...

  • Color: bronze
  • Brand: Apollo Valve
  • ASIN: B0062RZ26C
  • UPC: 670750719226

(5-PK) 1/4" FPT Full Port Ball Valve- Apollo International- Lead Free

(5-PK) 1/4" FPT Full Port Ball Valve- Apollo

The 94ALF Series Ball Valve by Apollo Valves is a lead free forged brass ball valve that combines reliable operation with the utmost economy. The 94ALF Series is ideal to gas, fuels, fire protection and general plumbing and HVAC applications including potable water. Featuring quarter-turn lever handle flow control, the 94ALF Series ball valve is a versatile and reliable ball valve.

  • Color: Bronze
  • Brand: Ohio Supply
  • ASIN: B07SQ43BGK

Apollo 70-200 Series Bronze Ball Valve, Two Piece, Inline, Lever, 3/8" Solder End

Apollo 70-200 Series Bronze Ball Valve, Two Piece,

The Apollo 70-200 series two-piece inline ball valve is made of bronze and has a lever handle and solder end connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass, and has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has solder end connections for semi-permanent yet reversible connections to tubing. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or reduced or regular) port for reduced valve size and cost and has a working temperature range of –-20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swive...

  • Brand: Apollo Valve
  • ASIN: B0026GUQ28
  • UPC: 670750664595

Apollo 70-600 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 2" NPT Female

Apollo 70-600 Series Bronze Ball Valve, Two Piece,

The Apollo 70-600 series two-piece three-port diverting ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual control. This ball valve is three-port diverting to regulate flow among three sections of pipe. Its maximum pressure is 400 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG). It has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ...

  • Brand: Apollo Valve
  • ASIN: B0062RYBL4
  • UPC: 670750674167
Similar Apollo Ball Valve Results