MOES Dual Power Controller 50A 5500 Watt Automatic Transfer Switch for Off Grid Solar Wind System ATS DC 12V 24V 48V AC 110V 220V
Go Power! TS-30 30 Amp Automatic Transfer Switch
Go Power! TS-30 30 Amp Automatic Transfer
Go Power! 30 Amp Transfer Switch is used to hardwire inverters into a system where there is an alternative source of AC. This transfer switch is made to only allow one source of AC power to pass through it to the loads and can handle 30 Amps of service. This ensures that the inverter will not be damaged if the generator or utility power is hooked up while the inverter is running as well as well as contains all instructions.
- Color: Black
- Brand: Go Power!
- ASIN: B00153EYTO
- UPC: 756635758082
Spartan Power 50A 5500 Watt Automatic Transfer Switch Great for Solar & Wind Off Grid Systems
Spartan Power 50A 5500 Watt Automatic Transfer Switch
The SP-TS4500PLUS dual power transfer switch allows for trouble-free operation of inverters and AC mains in the same circuit. This unit will work on 12V, 24V or 48 Volt solar and wind systems. Can be used worldwide as it will perform on 120V 60Hz or 220V 50Hz systems.
- Color: 12V, 24V & 48V
- Brand: Spartan Power
- ASIN: B07D41S7CK
- UPC: 852874008435
Akozon Isolation Type Dual Power Automatic Transfer Switch ATS 100A/4P
Akozon Isolation Type Dual Power Automatic Transfer Switch
This is a dual power automatic transfer switch (ATS) that combines switch and logic control in one. It truly realize the mechatronics without an additional controller needed. With voltage detection, frequency detection, communication interface, electrical and mechanical interlocking and other functions, this switch can achieve automatic control, electric remote control, emergency manual control. Features: 1. Mechatronics design, switch transfer is accurate, flexible and smooth; Adopting advanced logic control technology, with strong anti-interference capability. 2. Applicable for automatic conversion between main power supply and backup power supply in power supply system, automatic conversion and safety isolation of the two loading equipments. Specification: Insulation voltage: 500V Rated voltage: 400V Rated current: 100V Rated impulse withstand voltage: 4kV 3C rated voltage range: 37V-440V Size: 245*110*135mm / 9.6*4.3*5.3in Package weight: Approx. 3616g / 127.5oz Package list: 1 * Automatic Transfer Switch 1 * Manual Operation Handle 1 * User Manual
- Brand: Akozon
- ASIN: B07K7Q18JL
- UPC: 791380258999
Yaegoo Mini Dual Power Automatic Transfer Switches Self cast Conversion 50/60HZ AC-33iB AC 400V 63A 4P ATS CB Level M6
Parallax Power Supply (ATS301 30 Amp 120V Generator Switch
Parallax Power Supply (ATS301 30 Amp 120V Generator
Parallax Power Supply Line Generator Switch. For 30 Ampere 120-volt electrical systems. Allows changeover of power between shoreline cord and generator controlled from inside the RV. Can be used as deck-mount or mounted to the back of Parallax Power Centers. Reliable electronic operation. Generator time delay for load stabilization. Chatter-free operation under low line voltage conditions. Weight: 3.5 pounds 6 inch width x 4-1/8 inch Depth x 4-7/16 inch height.
- Brand: Parallax Power Supply
- ASIN: B002UC6XTI
- UPC: 180347000588
Samlex Solar STS-30 Automatic Transfer Switch
Samlex Solar STS-30 Automatic Transfer
Whether you're using solar, batteries or a generator to power your AC devices on the road, chances are, you're going to want to use shore power when it's available. Connect a Samlex Transfer Switch to your generator, or to your inverter/battery bank and have your AC source switched automatically to shore power when you plug in.
- Color: Black
- Brand: Samlex America
- ASIN: B00545O85O
- UPC: 622988079306
2P 63A 230V MCB Type Dual Power Automatic Transfer Switch ATS ATSE for Generator Photovoltaic PV System Battery CE Certificated
WFCO T57 50 Amp Transfer Switch
WFCO T57 50 Amp Transfer
This WFCO Transfer Switch is designed to provide trouble-free changeover between shore power and a generator. It is engineered for safe, reliable performance. The unit's DC coil prevents AC "chatter" noise and drop-out in low-voltage conditions. A transfer time delay feature prevents power crossover and arcing for additional safety. The "break before make" configuration prevents accidental coupling of power from, or to, the shore line and generator. Shore power is always available (pass-through) without having to energize the relays. It mounts easily onto a flat surface. It offers plenty of internal space for easy installation and convenient terminal bar access.
- Brand: WFCO
- ASIN: B009LFZZFK
DATAKOM DKG-173 230/400V Generator / Mains Automatic Transfer Switch Panel (ATS)
DATAKOM DKG-173 230/400V Generator / Mains Automatic Transfer
WE DO NOT SELL THIS PRODUCT TO USA AND CANADAThe DATAKOM model DKG-173 is a DIN Rail mounted ATS controller not requiring DC supply. The unit monitors 3-phase mains voltages, sends remote start command to the generating set and performs changeover of both generator and mains contactors. The front panel leds provide information about mains and generator power availability as well as contactor positions. Mains return delay and genset contactor delays are adjustable between 1 and 40 seconds through front panel knobs. TECHNICAL SPECIFICATIONS Alternator Voltage: 170-300 V-AC (Ph-N) Mains voltages: 170-300 V-AC (Ph-N) Generator Contactor Delay: 1 to 40 sec. adjustable Mains Return Delay: 1 to 40 sec. adjustable MCB Relay Output: 10A @ 250V-AC GCB Relay Output: 10A @ 250V-AC Remote Start Relay Output: 10A @250V-AC/28V-DC Operating temp.: -30°C (-22°F) to 70 °C (158°F). Storage temp.: -30°C (-22°F) to 80 °C (176°F). Maximum humidity: 95% non-condensing. Dimensions: 70x115x66mm (WxHxD) Weight: 180g (approx.) Installation: DIN Rail mounted. Case Material: High Temp. ABS/PC (UL94-V0) IP Protection: IP20 Conformity (EU directives) 2006/95/EC (low voltage) 2004/108/EC (EMC) Norms of reference: EN 61010 (safety requirements) EN 61326 (EMC requirements) Check also the newest DKG-...
- Brand: Datakom
- ASIN: B00820OLSC
Progressive Dynamics PD5110610V 5100 Series Automatic Transfer Switch - 120 VAC, 30 Amp w/Screw Connection
Progressive Dynamics PD5110610V 5100 Series Automatic Transfer Switch
The Progressive Dynamics 5100 Series Automatic Transfer Switch features a quick change circuit board that is easily replaced in the event of a failure with no need to disconnect and install the entire unit. A time delay feature ensures the generator is at a stable level before transfer occurs. Built-in strain reliefs allow the installer to simply push the branch circuit wires inside the unit for connection, eliminating the need to purchase and install seperate strain reliefs for each circuit. Dimensions: 9.25" L x 7.28" W x 4.2" H.
- Brand: Progressive International
- ASIN: B002UCADGW
- UPC: 675566511064
Giraffe-X 110V 2P 63A MCB type Dual Power Automatic transfer switch ATS
Giraffe-X 110V 2P 63A MCB type Dual Power
TIPS:★Dual power Automatic transfer switch can switch to Normal power or reserve power automatically.★Please noted that the switch can't turn on or turn off the generator. ★This switch Normal power first. If normal power on, the switch will switch to Normal power. If normal power off, and reserve power on, the switch will switch to reserve power.Wire:★Press the button to Automatic, the switch will switch to Normal power or reserve power automatically.★Press the button to Manual, Then you have to switch the Direction manually. Application:★GCQ2-63/2 is terminal type automatic transfer device.★It's suitable for 3 phases 4 wires (or 1 phase 1 wire) dual power grid with AC 60Hz, rated voltage 400V/110V and rated current up to 63A. ★When one power goes wrong (only test normal Phase A voltage and reserve Phase A voltage, only test loss voltage or loss phase),it will automatic connect one or several load circuits from one power to the other power automatically, to ensure normal power supply of load circuits. Normal conditions for operation and installation:★Environmental Temperature Condition:-5~+40°C★Installation site is not more than 2000 meters above sea level.★Pollution Level: Grade 3★Installation Category: 3★ Vertical installation or horizontal installati...
- Brand: Giraffe-X
- ASIN: B07LBH4WY3
Eapmic 50/60HZ AC-33iB AC 110V 63A 4P Self cast Conversion Mini Dual Power Automatic Transfer Switches ATS CB Level M6 (2P/63A)
Eapmic 50/60HZ AC-33iB AC 110V 63A 4P Self
Specifications:Conversion mode: self castDisplay function: indicator light displayInstallation dimension: 198mm*122mm hole: M6ATS level: CB levelUse level: AC-33iBLine voltage: AC110VLine current: 6A-63AOperating frequency: 50HZ/60HZInsulation voltage: AC110VConversion time: 2S or so Package Include :1 x Dual Power Automatic Transfer Switch1 x Manual
- Brand: Eapmic
- ASIN: B07GSLZ674
- UPC: 610895414617
SMARTGEN SGQ630A-4P Automatic Transfer Switch (ATS), T Type
SMARTGEN SGQ630A-4P Automatic Transfer Switch (ATS), T
Automatic Transfer Switch (ATS) is used which operation voltage is no more than 660VAC, and may transfer with load. The ATS rated current series is40A, 63A, 80A,125A, 160A, 250A, 400A, 630A, 800A,1000A,1250A,1600A,2000A,be divided up two types with 3 poles and 4 poles. The ATS of 40-125A is defined with 'N'; 160-400 is defined with 'T'; 630A-2000A is defined with "M". SGQ Automatic Transfer Switch (ATS) is used in conditions from AC660V 50/60HZ to DC250V which under electromagnetism drive structure and two-stage PC class type. SGQ ATS can make fast load transfer (transfer time ≤80ms) of two ways power supply. Also ATS can be widely used in high buildings, post, telecommunications, coal mines, ships, industry, health care, military facilities and so on. 2-way power supply can be grid, auto start genset, storage battery and etc.. STRUCTURE AND CHARACTERISTICS SGQ Automatic Transfer Switch (ATS) adopts structure of magnet coil driving and interlocking of electric and mechanical. The structure of major loop contact terminal consists of one dynamic and two static contacts. And the dynamic contact is in "V" type design, in order to ensure there is no short circuit of the 2-way power supply. "N" and "T" type use structure of double coils while "M" type use single coil operation. The...
- Brand: SMARTGEN
- ASIN: B07GH5MJLF
DATAKOM DKG-175 Generator/Mains Automatic Transfer Switch Controller (ATS)
DATAKOM DKG-175 Generator/Mains Automatic Transfer Switch Controller
DESCRIPTION DATAKOM DKG-175 DIN RAIL MOUNTED ATS CONTROLLER WITHOUT DC SUPPLY The DATAKOM model DKG-175 is a DIN Rail mounted ATS controller not requiring DC supply. The unit monitors 3-phase mains voltages, sends remote start command to the generating set and performs changeover of both generator and mains contactors. The unit is microprocessor controlled and offers flexible of use thanks to adjustable parameters. The front panel leds provide information about mains and generator power availability as well as contactor positions. The TEST mode allows generator testing while mains is present. FEATURES: DIN Rail mounted No DC supply required Microprocessor controlled Adjustable parameters 10A/250VAC MCB and GCB outputs 10A/28VDC/250VAC remote start output Isolated mains and genset inputs TEST mode available TECHNICAL SPECIFICATIONS: Alternator voltage: 170-300 V-AC (Phase-Neutral) Mains voltage: 170-300 V-AC configurable (Phase- Neutral) Mains frequency: 30 - 70 Hz configurable Generator contactor timer: 1 - 40 sec. configurable Mains contactor timer: 0 - 999 sec configurable Mains waiting timer: 0 - 999 sec configurable Mains fail timer: 0 - 999 sec configurable Cooldown timer: 0 - 999 sec configurable Remote start delay: 0 - 999 sec configurable Mains contactor output:...
- Brand: Datakom
- ASIN: B0773T34FT