StewMac Guitar Neck Shims for Bolt-on Necks, Made of Solid Maple, Blank, Set of 3

StewMac Guitar Neck Shims for Bolt-on Necks, Made

Full contact, precisely taperedTo change the angle of a bolt-on neck, players and repair shops have used shims for years. We've seen everything from matchbook covers to guitar picks stuck in neck joints.Those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. As Dan Erlewine describes in his Guitar Player Repair Guide:"This gap may cause an upward kink in the neck. And many players feel they lose tone unless firm contact is maintained between the neck and the body."Dan creates tapered shims that cover the entire heel of the neck. With these Bolt-On Shims, that work is done for you. Attention repair shops: Making a quality shim takes time. Keep these on hand for a quick turnaround on this common repair.These blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the Fender Micro-Tilt™.This set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck:0.25-degree shim offers the most versatility – stacking them will let you really dial in the neck angle you're after.0.5-degree taper is the one you'll reach for most often – it works great on Fender and many other solidbody guitars.1-degree taper for guitars with a Tune-o-ma...

  • Brand: StewMac
  • ASIN: B01LW929UM

StewMac Electric Guitar Neck Blank for Bolt-on Neck, Plain Maple

StewMac Electric Guitar Neck Blank for Bolt-on Neck,

Our StewMac Electric Guitar Neck Blank is a planed, unprofiled solid maple neck blank for constructing a two-piece bolt-on neck.Ready for bandsawing and shaping in your shopDesigned to have a separate fingerboard attached after construction of the neckFlatsawnDimensions: 13/16" x 3-7/8" x 27" (20.65mm x 98.43mm x 685.80mm)Plain maple

  • Brand: StewMac
  • ASIN: B078NSPJDH

Honduran Mahogany Neck Blanks 24 X 3 X 1 inches

Honduran Mahogany Neck Blanks 24 X 3 X

Honduran Mahogany Neck Blanks ( Swietenia Macrophylla) 24 X 3 X 1 inches Dimensions: 24 x 3 x 1 inches (609.6 x 76.2 x 25.4 mm) Air Dried Sets | Moisture 8-10 Percent | Not sanded | You will get similar sets as in photo. Each of our blanks has been Air dried and ready for use once it's been acclimated to your shop's environment. This depends it better to keep them stickered in your shop for 2-3 weeks before you use them.

  • Brand: Generic
  • ASIN: B07PNK7BNW

Electric Guitar Neck DIY Part Unfinished Canada Maple Bolt On 24 Frets Bone Nut

Electric Guitar Neck DIY Part Unfinished Canada Maple

SpecificationSuit for: Electric Guitar DIYGuitar HeadDIY Size: about 3.94 x 6.1 x 0.39 inchGuitar NeckBack profile: "C" shapeInstallation: bolt-onWidth at Nut: about 1.69 inchWidth at 12th Fret: about 2.05 inchWidth at Heel: about 2.22 inch Depth at 1st Fret: about 0.89 inchDepth at 12th Fret: about 0.98 inchDepth at Heel: about 0.83 / 1.08 inch ( with fingerboard) Scale Length: 25.5 inch /648 mmNumber of Frets: 24Truss Rod Type: 4 mm, double style Radius: 16 inches /406 mmFret Wire: 2.4 mm medium jumboSide Dot: 2 mm PearloidMaterialBody Material: Canada mapleFingerboard: Canada mapleNut: BoneBinding: ABSFret Wire: CupronickelMark Dot: Black blockFinish: Clear satinPackage Include1 x Guitar Neck

  • Brand: Kmise
  • ASIN: B078SQFZCS

kesoto 2 Pieces Handmade Maplewood Cigar Box Neck Blank Rosewood Fingerboard Luthier Guitar Maker Supply

kesoto 2 Pieces Handmade Maplewood Cigar Box Neck

Description: - 100% brand new and high quality - Maple wood guitar neck, rosewood fretboard - Unfinished DIY guitar neck, square head - Great for Cigar Box GuitarSize Chart:Approx. 900 x 40mm/35.43 x 1.57inchPackage Includes:2 Pieces Cigar Box Guitar Neck

  • Brand: kesoto
  • ASIN: B07SJJSMFJ
  • UPC: 756617526517

StewMac Electric or Archtop Guitar Neck Blank for Glue-in Neck, Sipo Mahogany

StewMac Electric or Archtop Guitar Neck Blank for

African Sipo ("seepo") is a beautiful mahogany variety. A little bit denser with slightly bolder grain.Fine wood for building your own neck. For over 40 years we've supplied select neck wood to instrument makers. Each kiln-dried planed neck blank is a solid piece that's ready for bandsawing and shaping in your shop. Sized to include sufficient wood for adding headstock "ears."About our mahogany neck blanks — Used in traditional guitarmaking, genuine mahogany is very stable, dense, and is one of the best woods for woodworking; it sands easily, routed edges stay crisp and sharp, and it accepts stains and finish. Unsurpassed working and finishing qualities.Mahogany is naturally highly variable in color and graining pattern, so no two pieces look alike: each piece is beautifully unique!1-piece solid woodCarefully selectedKiln driedQuartersawnApproximate dimensions: 3-1/2" thick x 2-1/2" wide x 26" long (88.90mm x 63.5mm x 660.40mm)Sized for building a glue-in neck for a solidbody or thin archtop guitar.

  • Brand: StewMac
  • ASIN: B078P1KDXJ

Maple Guitar Neck, 22 Fret Electric Guitar Neck Blank for Bolt-on Neck Parts Maple Fingerboard Replacement

Maple Guitar Neck, 22 Fret Electric Guitar Neck

Features: 10mm head machine peg holes for tuner installation. Adjustable truss rod has been installed at the headstock. Maple wood makes the sound more Loud and clear. A replacement part for ST electric guitar. With inlay dots on side, it is convenient to distinguish the corresponding fret. Specifications: Item: Guitar Neck Material: Maple Wood Fret: 22 Peg Holes Diametre: 10 mm / 0.4 inch Position Mark Dots: Black Acrylic Colour: Yellow Fretboard Length: Approx. 48 cm / 18.75 in  Neck Depth: Approx. 1.8 cm / 0.7 in (with Fretboard 2.3 cm / 0.9 in) Heel Depth: Approx. 2.0 cm / 0.8 in (with Fretboard 2.6 cm / 1.0 in) Size: Approx. 67.5 * 5.5 * 2.5 cm / 26.6 * 2.2 * 1.0 inch Weight: Approx. 748 g   Package Included: 1 * Guitar Neck

  • Brand: Alomejor
  • ASIN: B07JNQ7Z6W
  • UPC: 757686525814

Guitar Neck Blank - Indian Rosewood - 700x85x25 mm.

Guitar Neck Blank - Indian Rosewood - 700x85x25

EAST INDIAN ROSEWOOD NECK BLANKS 30" X 4" X 1 1/4"

  • Brand: Guitar tools USA
  • ASIN: B073HJWKVT

kesoto Mahogany Neck Blank Material for Guitars Ukulele, 600x88x28mm/23.62x3.46x1.10inch - A

kesoto Mahogany Neck Blank Material for Guitars Ukulele,

Description: - Guitar ukulele wood neck blank luthier material. - Smooth cut surface, can be used as guitar and ukulele neck. - Made of mahogany, high hardness and clear texture. - Great for DIY your own guitar and guitar luthier. - Suitable for acoustic guitar ukulele luthier maker. - Material: MahoganySize Chart:Approx. 600 x 88 x 28mm / 23.62 x 3.46 x 1.10inchPackage Includes:1 Piece Guitar Neck BlankNote:The texture of Class A wood is not as clear as the 3A grain.

  • Color: A
  • Brand: kesoto
  • ASIN: B07MVZBHDM
  • UPC: 707998110253

StewMac Neck Blank for Classical Guitar, Sipo Mahogany

StewMac Neck Blank for Classical Guitar, Sipo

African Sipo ("seepo") is a beautiful mahogany variety. A little bit denser with slightly bolder grain.Fine wood for building your own neck. For over 40 years we've supplied select neck wood to instrument makers. Each kiln-dried planed neck blank is a solid piece that's ready for bandsawing and shaping in your shop.About our mahogany neck blanks — Used in traditional guitarmaking, genuine mahogany is very stable, dense, and is one of the best woods for woodworking; it sands easily, routed edges stay crisp and sharp, and it accepts stains and finish. Unsurpassed working and finishing qualities.Mahogany is naturally highly variable in color and graining pattern, so no two pieces look alike: each piece is beautifully unique!1-piece solid woodCarefully selectedKiln driedQuartersawnApproximate dimensions: 15/16" thick x 3" wide x 36" long (23.81mm x 76mm x 914mm)Sized for building a classical guitar neck, with sufficient wood for heel laminations and a scarf-jointed headstock

  • Brand: StewMac
  • ASIN: B078P1HB81
Similar Blank Guitar Neck Results