Southwest Wheel 3,500 lbs. Trailer Axle Hydraulic Brake Kit 5-4.5 Bolt Circle

Southwest Wheel 3,500 lbs. Trailer Axle Hydraulic Brake

10" Hydraulic Trailer Brake Kit for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more.

  • Brand: Southwest Wheel
  • ASIN: B01E7GB9D4

Sturdy Built Tandem Axle Long 24ft Trailer Brake Line Kit with Flexible Hydraulic Rubber Hoses Disc Or Drum

Sturdy Built Tandem Axle Long 24ft Trailer Brake

This kit simplifies the process of mounting hydraulic brake lines to your trailers frame. Whether you have a leaf spring axle, or torsion axle, this Brake Hose kit will outfit your trailers disc or drum brake system. This kit uses Kodiak DOT Flexible Rubber trailer brake hoses for each length needed. Using these hoses ensures that your brake hoses will not crack or wear, which would cause pre-mature failure. Each brake hose is UV rated to prevent sun damage. In addition, these hoses have two male Brass Inverted 3/16" fittings with stainless steel flares that use 3/8-24 thread, which will fit most trailer disc brake calipers, wheel cylinders, master cylinders, and solenoid valves. The swiveling ends of these brake hoses prevents twisting of the hoses during installation and provides more room for tools. Kodiak Brass hose fitting ends also provide 40% more thread contact than other competitive hoses, yielding a more secure connection and leak proof system. Included: (1) 24 ft Trailer Brake Hose (1) Brass Cross Fitting (1) Brass T Fitting (2) 24" Trailer Brake Hose (2) 7 ft Trailer Brake Hose (1) 3.5 ft Trailer Brake Hose (15) Push Mount Screw In Cable Ties (15) Standard Cable Ties

  • Brand: Sturdy Built
  • ASIN: B07J9RBC61

Libra One New 10" X 2-1/4" Trailer Brake Drum Kit 5 on 5" B.C. for 3500 Lbs Axle - 22002K

Libra One New 10" X 2-1/4" Trailer Brake

Bolt pattern: 5 on 5" 5 x 1/2"-20 studs pre installed 2 x bearing races pre installed Kit also included L68149 inner cone bearing and L44649 outer cone bearing Grease seal 1.719" x 2.565", E Z lube grease cap with rubber plug 5 cone wheel nuts 1/2"-20 thread Fits 10" x 2-1/4" electric and hydraulic brakes (not included) Replace part #. 008-249-07, 84557 Works on Dexter and other brands 3500 lbs axle in the market

  • Brand: Libra
  • ASIN: B013HQSHTO
  • UPC: 758399867468

Libra One New 12" X 2" Trailer Brake Drum Kit 6 on 5.5" B.C. for 5200-6000 Lbs Axle - 22003K

Libra One New 12" X 2" Trailer Brake

Bolt pattern: 6 on 5.5" 6 x 1/2"-20 studs pre installed 2 x bearing races pre installed Fits 12" x 2" electric and hydraulic brakes (not included) Replace part #. 008-201-09, 42656 Works on Dexter and other brands 5200-6000 lbs axle in the market Kit also included 25580 inner cone bearing and 15123 outer cone bearing Grease seal 2.25" x 3.371" EZ lube grease cap with rubber plug 6 cone wheel nuts 1/2"x20 thread

  • Brand: Libra
  • ASIN: B013HRAIB8
  • UPC: 758399867420

2PK 10" x 2-1/4" Trailer Brake Hub Drum Bearing Kit 5 on 4.5" 3500 lb Axle 22001K

2PK 10" x 2-1/4" Trailer Brake Hub Drum

EACH 10" HUB KIT INCLUDES THE FOLLOWING - (1) 10" trailer hub with 5 on 4 1/2" Bolt pattern. Hubs have (5) 1/2"-20 studs installed, (1) Race for bearing, installed in hub, (1) Set of Bearings.

  • Brand: Replaces Dexter
  • ASIN: B07LGHG8TB

Demco 8605001 Brake Actuator

Demco 8605001 Brake

1/2" x 4 1/2" grade 5 bolts are required in mounting of straight actuators. Limited to coupler rating. Plated actuator may be used in a marine application.

  • Brand: Demco
  • ASIN: B001IHBLPC
  • UPC: 765053846707

10" x 2-1/4" Trailer Electric Brake Assembly (1 right + 1 left)

10" x 2-1/4" Trailer Electric Brake Assembly (1

10" Electric Trailer Brake Assemblies for utility trailers, travel trailers, horse trailer, motorcycle trailers, and more.

  • Brand: Southwest Wheel
  • ASIN: B0098M5LUK

JDMSPEED New Trailer Brake Hub Drum 10" X 2-1/4" Kit 5 on 4.5" for 3500 Lbs Axle - 22001K

JDMSPEED New Trailer Brake Hub Drum 10" X

Kit include 1x 5 on 4.5 brake drum 1x L68149 inner cone bearing 1x L44649 outer cone bearing 1x Grease seal 1.719"x 2.565" 1x E Z lube dust cap w/ rubber plug 5x cone wheel nuts 1/2-20" thread Product Description 5 on 4.5" bolt pattern 5 x 1/2"-20 studs installed 2 x bearing races installed Fits 10" x 2-1/4" electric and hydraulic brakes (not included) Replace part #. 008-247-05, 84546 Works on Dexter and other brands 3500 lbs axle in the market This drum has been sold by large quantity to trailer axle manufacturers nationwide

  • Brand: JDMSPEED
  • ASIN: B07MY1W82G
  • UPC: 711766843724

KODIAK 10" Trailer Disc Brake Assy, DAC Bearings & Seals incl. (Comp. 1 Axle Kit)

KODIAK 10" Trailer Disc Brake Assy, DAC Bearings

KODIAK 10" Trailer Disc Brake Assembly, DAC (previously known as S-CAD) Complete One Axle Kit (Complete KIT) Bearings and Seals included. Integral 10" hub and rotor (one piece), 545 wheel bolt pattern. Caliper bracket mounts to 4 bolt brake flange and fits inside 13" and larger wheels. Part Number : 2/HRCM-10-DAC Rotor : Silver Cadmium Plated Caliper : Silver Cadmium Plated Mounting Bracket : Silver Cadmium PlatedInner Bearing: (2) L68149 Outer Bearing: (2) L44649Seal: (2) 171255TBPLEASE NOTE: UFP Axles require seal number 168255 and the rest of the trade uses 171255TB

  • Brand: By KODIAK
  • ASIN: B006UH5IMC
  • UPC: 191215149513

Dexter K7165000 Hydraulic Brake Actuator

Dexter K7165000 Hydraulic Brake

DEXTER Hydraulic Brake Actuator for Trailer Tandem Axle And Drum Brakes. This unit is for the drum brakes 1000 PSI. Electro/Hydraulic brake actuator provides 1000 psi of pressure for 1-3 axles equipped with drum brakes. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed housing provides a weather tight seal. Large reservoir capacity reduces the number of fill-ups required which reduces the bleed time as well as the risk of running the reservoir dry during brake bleeding Aluminum enclosure provides anti-corrosive protection and prevents the elements from affecting reliability while the finned housing design dissipates heat efficiently The unit's hydraulic pump is unrestricted by fluid displacement requirements of brakes which allows for use on single, tandem, and triple axle applications regardless of capacity without the risk of starving the brakes for fluid Solid state electronics eliminate mechanical relays and possible damage to the unit if wired incorrectly in addition to improved durability and compatibility with any electric brake controller Proportional pressure output to the brakes corresponds to voltage output of the brake controller for smooth, reliable braking Reliable warranty coverage provides each actuator with an industry leading...

  • Brand: Dexter
  • ASIN: B00ANY1LEM

New Brake Line Lock Hydraulic Brake Park Lock Pressure Holder Disc Or Drums

New Brake Line Lock Hydraulic Brake Park Lock

Premium Hydraulic Brake Park Lock. This Is A Manual Push Button Hydraulic Lock Using The Brake Fluid Line Pressure To Hold The Brakes Locked In Place. Once Installed Simply Press The Brake Pedal Down, Then Push And Hold Down The Park Lock Button While Releasing The Brake Pedal. Inlet And Outlet On This Park Lock Is Tapped For 1/8" NPT And Is Provided With 2 Brass Fittings 1/8" NPT X 3/16" American Female. Note: This Should Not Be Used As A Emergency Brake, Most OEM Emergency Brakes Are Cable Controlled.

  • Brand: Empi
  • ASIN: B071L7CLMR
  • UPC: 685228714184

Tie Down Engineering (70520) Drum Brake Actuator - Model 660

Tie Down Engineering (70520) Drum Brake Actuator -

Introducing the new Tie Down Engineering Drum Brake Actuator. Equipped with the new "Drop N Go" latch mechanism. The quick lock mechanism will automatically lock when lowered onto the hitch ball. Fits 2" balls and mounts onto a 3" trailer frame. Bolt on design. Rated up to 6,600 lbs GTW with a maximum tongue weight at 660 lbs. Please note: Mounting hardware is not included. Breakaway device & manual reverse lock-out are included.

  • Brand: Tie Down Engineering
  • ASIN: B01AMBB7HQ
  • UPC: 750253646431

Dexter K23-410-00 Hydraulic Brake Assembly 12-1/4"X3-3/8 10K GD Left Hand

Dexter K23-410-00 Hydraulic Brake Assembly 12-1/4"X3-3/8 10K GD

THIS COMPLETE HYDRAULIC BRAKE ASSEMBLY FITS ON DEXTER 10,000LB GENERAL DUTY AXLES WITH HYDRAULIC DRUM BRAKES. 12-1/4" X 3-3/8" 7-BOLT LEFT-HAND ( DRIVER'S SIDE). THIS IS A FORWARD SELF-ADJUSTING, DUO-SERVO BRAKE.

  • Brand: Dexter
  • ASIN: B078SGPZFM
  • UPC: 876983002139

Sturdy Built Tandem Axle Trailer Brake Line Kit 20ft with Flexible Hydraulic Rubber Hoses Disc Or Drum Brakes

Sturdy Built Tandem Axle Trailer Brake Line Kit

This kit simplifies the process of mounting hydraulic brake lines to your trailers frame. Whether you have a leaf spring axle, or torsion axle, this Brake Hose kit will outfit your trailers disc or drum brake system. This kit uses Kodiak DOT Flexible Rubber trailer brake hoses for each length needed. Using these hoses ensures that your brake hoses will not crack or wear, which would cause pre-mature failure. Each brake hose is UV rated to prevent sun damage. In addition, these hoses have two male Brass Inverted 3/16" fittings with stainless steel flares that use 3/8-24 thread, which will fit most trailer disc brake calipers, wheel cylinders, master cylinders, and solenoid valves. The swiveling ends of these brake hoses prevents twisting of the hoses during installation and provides more room for tools. Kodiak Brass hose fitting ends also provide 40% more thread contact than other competitive hoses, yielding a more secure connection and leak proof system. Included: (1) 20 ft Trailer Brake Hose (1) Brass Cross Fitting (1) Brass T Fitting (2) 24" Trailer Brake Hose (2) 7 ft Trailer Brake Hose (1) 3.5 ft Trailer Brake Hose (15) Push Mount Screw In Cable Ties (15) Standard Cable Ties

  • Brand: Sturdy Built
  • ASIN: B07J9LLBYJ

TITAN / DICO Model 10 Drum Brake Actuator

TITAN / DICO Model 10 Drum Brake

Dico Model 10 Hydraulic Surge Brake Actuator is zinc-plated for excellent corrosion-resistance. Bolts over 3" wide trailer tongue and includes standard, heavy-duty coupler with 3" drop 2 5/16" Ball Size. •Built in 3" Drop •Breakaway kit included •Ball size: 2-5/16" •Mounting: 3" wide tongue •Mounting Holes on 3" and 5" Centers •Capacity: 12,500 lbs •Maximum tongue weight: 1,250 lbs

  • Brand: Titan - Dico
  • ASIN: B006UH64TS
  • UPC: 106151247810
Similar Brake Hydraulic Drum Results