Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare x 1/2" Male Pipe

Anderson Metals Brass Tube Fitting, Half-Union, 1/2" Flare

This Anderson Metals half union compression tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect and disconnect two tubes more easily than with a coupling. It has a flared tube connection on one end and a male National Pipe Taper (NPT) connection on the other for connecting to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This half union compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types ...

  • Brand: Anderson Metals
  • ASIN: B002SAOEBQ
  • UPC: 719852935124

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare x 1/8" Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 3/8" Flare

This Anderson Metals coupling compression tube fitting is made of brass, has a flared tube connection and a female NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting can be used with copper, brass, aluminum, or steel tubing to connect two tubes of the same diameter in a straight run. It has a flared tube connection on one end and a female National Pipe Taper (NPT) connection on the other, creating a tighter seal than straight threads. This fitting is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This coupling compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, an...

  • Brand: Anderson Metals
  • ASIN: B006PKK3XI
  • UPC: 719852107125

Anderson Metals Brass Tube Fitting, Short Flare Nut, 3/8" Tube OD

Anderson Metals Brass Tube Fitting, Short Flare Nut,

This Anderson Metals short flare nut compression tube fitting is made of brass, connects to a flared tube or fitting, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting connects to a flared tube or fitting and can be used with copper, brass, aluminum, or steel tubing. It is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This short flare nut compression tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welded, barbed, and push-to-connect (also called one-touch). Push-to-connect connections do not require tools or sealants. Tube fittings are used in various applications, including machine tools, airplane an...

  • Brand: Anderson Metals
  • ASIN: B001JYX7LA
  • UPC: 719852934622

Anderson Metals Brass Tube Fitting, 45 Degree Elbow, 3/8" Flare x 1/4" Male Pipe

Anderson Metals Brass Tube Fitting, 45 Degree Elbow,

This Anderson Metals 45-degree elbow tube fitting is made of brass, has a flared tube connection and a male NPT connection, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This 45-degree elbow fitting connects two tubes at a 45-degree angle to change the direction of flow between tubes. It has a flared tube connection on one end for connecting to a flared tube and a male National Pipe Taper (NPT) connection on the other end to connect to a female NPT threaded tube, creating a tighter seal than straight threads. This fitting can be used with copper, brass, aluminum, or steel tubing and is part of an assembly that resists mechanical pullout for a more secure connection, and can be assembled and reassembled without affecting the seal. This 45-degree elbow tube fitting has an operating temperature range of -65 to +250 degrees F and is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resis...

  • Brand: Anderson Metals
  • ASIN: B006PKKMIO
  • UPC: 719852110286

Anderson Metals Brass Tube Fitting, Elbow, 5/8" x 5/8" Compression

Anderson Metals Brass Tube Fitting, Elbow, 5/8" x

This Anderson Metals 90-degree elbow compression tube fitting is made of brass, has compression connections on both ends, and is suitable for use with fuel and gas systems. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This 90-degree elbow fitting connects two tubes at a 90-degree angle to change the direction of flow between tubes. It has a compression connection on both ends for connecting unthreaded tube. Tightening the nut against the sleeve creates a compression seal against leaks, and loosening the nut allows disassembly of the joined parts. This three-piece construction fitting – nut, sleeve, and body – can be used with copper, brass, aluminum, or plastic tubing and has an operating temperature range of -65 to +250 degrees F. This 90-degree elbow compression tube fitting is suitable for use with fuel and gas systems, plumbing, refrigeration, and vacuum applications.Tube fittings are components used for connecting, branching, terminating, and changing the direction of tubing in pneumatic and hydraulic systems. They are made of brass, stainless steel, PBT (polybutylene terephthalate), and other materials that resist corrosion and wear. Tube fittings have various types of connections, including threaded, welde...

  • Brand: Anderson Metals
  • ASIN: B000BOA0RI
  • UPC: 719852933915

Anderson Metals Brass Tube Fitting, Union, 3/8" x 3/8" Flare

Anderson Metals Brass Tube Fitting, Union, 3/8" x

The Anderson Metals union compression tube fitting is made of brass and has flare connectors. This union fitting has a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings and has a 45-degree flare connection on both ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The operating temperatures for this fitting range from -65 to 250 degrees F. This fitting is suitable for copper, brass, aluminum, and steel tubing connections. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).Anderson Metals manufactures brass fittings, valves, and pipe nipples. The company, founded in 1951, is headquartered in Kansas City, MO.

  • Brand: Anderson Metals
  • ASIN: B000LNKDG2
  • UPC: 719852934820

Anderson Metals Brass Tube Fitting, Connector, 5/16" Compression x 3/8" Male Pipe

Anderson Metals Brass Tube Fitting, Connector, 5/16" Compression

Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 1/2"-24 and 9/16"-24 Thread sizes.

  • Brand: Anderson Metals
  • ASIN: B000WW55E2
  • UPC: 719852937173

Brass Compression Tube Fitting, Union, Brake Line Adapter, Tube OD 1/4" (5 Pack)

Brass Compression Tube Fitting, Union, Brake Line Adapter,

5 PC high quality 1/4" BRASS COMPRESSION FITTINGS 1/4" COMPRESSION X 1/4" COMPRESSION Tube OD= 1/4" (6 mm )

  • Brand: PAKA TOOLS
  • ASIN: B07CKN2CG6
  • UPC: 689855985788

Anderson Metals 50062 Brass Compression Tube Fitting, Union, 3/8" x 3/8" Tube OD

Anderson Metals 50062 Brass Compression Tube Fitting, Union,

Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. 3/8" Tube outer diameter. 5/8"-18 Thread size.

  • Brand: Anderson Metals
  • ASIN: B000BO9DYO
  • UPC: 719852933755

Parker CPI 8-8 FBZ-B Brass Compression Tube Fitting, Adapter, 1/2" Tube OD x 1/2" NPT Male

Parker CPI 8-8 FBZ-B Brass Compression Tube Fitting,

The Parker CPI FBZ-B series compression tube fitting is made of brass, and connects tubing to threaded pipe conforming to the National Pipe Thread (NPT) standard in a straight run. This coupling is for a fixed connection between tubing and pipe made of copper. A single ferrule compression fitting connects to tubing on one end for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications, and a male NPT connector on the other end connects to threaded pipe. Single ferrule compression fittings have fewer possible leak paths than twin ferrule fittings. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is commonly used in chemical, petroleum, power generation, laboratory, and medical device plants. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, sty...

  • Brand: Parker
  • ASIN: B004M18TXS

Anderson Metals Brass Tube Fitting, 90 Degree Elbow, 1/4" Flare x 3/8" Male Pipe

Anderson Metals Brass Tube Fitting, 90 Degree Elbow,

The Anderson Metals elbow is made of brass and has flare and National Pipe Taper (NPT) connectors. This 90-degree elbow fitting, also called "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has a 45-degree flare connection on one end and an NPT male connection on the other. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliability, and for use in installations where flames or heat are not allowed. The operating temperatures range from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It is suitable for copper, brass, aluminum, and steel tubing. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Flared fittings are alternatives to solder-type joints and are used when the use of an open flame from a soldering iron is impractical or prohibited. The most common flare fitting standards are the 45-degree and 37-degree flare. When purchasing fittings, consider the application, as this will affect ...

  • Brand: Anderson Metals
  • ASIN: B006PKK7EI
  • UPC: 719852930136

Anderson Metals Brass Tube Fitting, Flare Tee, 3/8" x 3/8" x 3/8" Flare

Anderson Metals Brass Tube Fitting, Flare Tee, 3/8"

The Anderson Metals flare tee is made of brass and has tubing connectors. This fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It connects to tubing on all three, flared ends. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This fitting has 45-degree flared construction for a stronger connection than soldered, long-term reliability, and for use in installations where flames or heat are not allowed. The operating temperatures range from -65 to 250 degrees F. This fitting is for use in fuel equipment, plumbing, gas, refrigeration, and vacuum applications. It is suitable for copper, brass, aluminum, and steel tubing. Pipe and tube fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Flared fittings are alternatives to solder-type joints and are used when the use of an open flame from a soldering iron is impractical or prohibited. The most common flare fitting standards are the 45-degree and 37-degree flare. When purchasing fittings, consider the application, as this will affect material type, shape, size, and r...

  • Brand: Anderson Metals
  • ASIN: B000KE3TE0
  • UPC: 719852934875

Dixon 68C-0604 Brass Compression Tube Fitting, Connector, 3/8" Tube OD x 1/4" NPT Male

Dixon 68C-0604 Brass Compression Tube Fitting, Connector, 3/8"

Brass compression fitting. No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Underwriter's laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.

  • Brand: Dixon Valve & Coupling
  • ASIN: B00835EPOQ
  • UPC: 697464422488

LTWFITTING Brass 5/8" OD Short SAE 45 Deg Flare Nut,Brass Flare Tube Fitting(Pack of 5)

LTWFITTING Brass 5/8" OD Short SAE 45 Deg

Product Description Durable and high standard brass fitting short flare nut. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. Click "honest-f" to choose the product you want in our shop. Features - Materies: Brass. - Net Weight: 36g/pc. - Type: Short Flare Nut. - Tube Size : 5/8" OD. Important Notes Pay attention to the column of size and color, you could find a variety of product types and quantities for your choice. The more your purchase the best price you get. About Shipping Great stock availability and fast dispatch are our core business. We would make effort to process each order within 24 hours. We are international seller, each item is required to be checked by two customs. China Post Air Mail and epacket are our main carriers, it normally takes about 1-2 weeks to deliver to US. If you do not receive the item during this period or have any problems, kindly contact us firstly. You can rest assured we would handle each order no matter big or small as faster as we can. About Us We are honest seller, any problems please contact us before leaving your feedback. We will try our best to work out the issue with you. These products come from our joint factory, its annual output is about 100,000,000 pcs. It is one of...

  • Color: Pack of 5
  • Brand: LTWFITTING
  • ASIN: B00MP337BY
  • UPC: 786471306086

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2" Tube OD x 1/2" NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting, 90

Three piece construction nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degree F to +250 degree F temperature range. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. Thread size: 11/16"-20.

  • Brand: Anderson Metals
  • ASIN: B000WP4284
  • UPC: 719852934295
Similar Brass Tube Fittings Results