Roush 11-14 F150 Cold Air Intake Kit 421238

Roush 11-14 F150 Cold Air Intake Kit

Upgrade your 2011-2014 5.0L Ford F-150 with this Cold Air Intake Kit and unleash additional performance of your engine, while increasing your fuel efficiency. The kit features the ROUSH® air filter, air dam, and induction tube. Cold air induction is a more efficient air intake method than the standard air filtering process. As a result, cold air induction can unleash the latent potential in power and fuel efficiency that is normally restrained by your stock air intake. Air first comes into the Air Dam, which keeps out hot air from the engine compartment. The result is that the air entering the filter is cooler and dense, providing for a more potent air charge. The ROUSH air filter media is a synthetic nano-fiber material that traps the smallest dirt particles that ordinary cotton-gauze "performance" filters can't capture. Based on SAE standards, ROUSH air filters capture almost twice the percentage of 2 micron particulates, and more than six times the amount of 0.5 micron particulates than our competitors' filters. Furthermore, ROUSH air filters are constructed using the finest materials available today, featuring a hand-poured urethane body that won't crack, curl or shrink like other rubber or plastisol units used by our competitors. ROUSH air filtration performance is second t...

  • Brand: Roush
  • ASIN: B00BR013SK
  • UPC: 844764212381

JLT Performance CAI2FMB01 2001 Mustang Bullitt JLT Cold Air Intake Fender Well Mount

JLT Performance CAI2FMB01 2001 Mustang Bullitt JLT Cold

We are excited to bring you the all new Cold Air Intake system for the 2001 Bullitt. NEW TUBE DESIGN Using the original JLT CAI as a guide, we molded, scuplted and perfected everything until we had the best looking, fitting and performing system you can buy. The new JLT tube is 4 1/4" ID, roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!! MAF and filter relocated into fender well for a cooler intake charge and can support 550-600 RWHP Works with both 80mm and 90mm MAF's, no need to buy more parts when you upgrade to a 90mm MAF MOLDED IN MAF The best part of this new JLT Cold Air is we kicked the cool factor up a notch and molded a 105mm MAF housing right in the tube. Now you have a kit you can grow into and not have to buy a complete new kit when you reach 550-600 RWHP. Putting a Whipple, Kenne Bell or Eaton blower swap on your Bullitt? Simply drill out the pre molded plug on the MAF block located on the bottom of the tube, discreetly out of sight. Install your SCT MAF sensor electronics, add our huge 4.5 X 12" S&B Powerstack filter and you've now changed your JLT Cold Air Intake into a JLT High Boost 12" Intake. Molding the MAF into the tube makes for a much smoother air flow with no couplers, reducers or separate MAF h...

  • Color: black
  • Brand: JLT Performance
  • ASIN: B00B3ZEXOK

Steeda Pro-Flow Cold Air Intake Kit Blue for 2005-2009 Ford Mustang Bullitt/GT

Steeda Pro-Flow Cold Air Intake Kit Blue for

The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.Note: Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNEIndependent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.Used by the top tuners in the industry.Product BenefitsAdded horsepower and torque Lifetime filter Keeps hot air out, cold air in Stainless Steel Housing & Shield (Not Cheap Plastic) The highest horsepower and torque rating on the market* Includes Velocity Stack Air Inlet Guide to reduce air turbulence

  • Brand: Steeda
  • ASIN: B06XKV53C3
  • UPC: 688943487029

Steeda Pro-Flow Cold Air Intake Kit Black for 05-09 Ford Mustang Bullitt/GT

Steeda Pro-Flow Cold Air Intake Kit Black for

The kit is supplied with a stainless steel air box with built-in velocity stack. It mounts in the factory location with the supplied rubber trim to seal it against the hood & fender to keep the hot air out . Our tests showed inlet temps a mere 5 degrees above ambient temperature. The Steeda Lifetime Filter can easily be cleaned and re-oiled, making maintenance a snap. All hardware required for installation is included in the kit.Note: Use of Steeda's Cold Air Intake REQUIRES a tune under if not used with our Steeda CAI Restrictor which requires NO TUNEIndependent test results have proven gains of over 4 HP and 5 ft/lbs of Torque over the entire RPM range of the so called 'leading brands'.Used by the top tuners in the industry.Product BenefitsAdded horsepower and torque Lifetime filter Keeps hot air out, cold air in Stainless Steel Housing & Shield (Not Cheap Plastic) The highest horsepower and torque rating on the market* Includes Velocity Stack Air Inlet Guide to reduce air turbulence

  • Brand: Steeda
  • ASIN: B07NYTVN2S
  • UPC: 689750183364

JLT Performance RAI2FMB01 2001 Mustang Bullitt JLT Ram Air Intake

JLT Performance RAI2FMB01 2001 Mustang Bullitt JLT Ram

We are excited to bring you the all new Ram Air Intake system for the 2001 Bullitt. NEW TUBE DESIGN The new JLT tubes are 4 1/4" ID, roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!! We started from scratch, designing a kit that not only looks great, but installs easy and can flow enough air to support anything it's put on. NEW HEAT SHIELD DESIGN The heat shield is all new as well. Vacuum formed from ABS plastic and designed to not only look good, but block engine heat at low speed and idle. GAINS 8-10 RWHP are typical with this kit. EASY INSTALL The new design, detailed instructions and online video instructions helps make this an easy install. KIT INCLUDES: •JLT plastic intake tube •Silicone Coupler •Silicone Reducer •ABS Heat Shield •4x9 S&B powerstack air filter •MAF adapter •MAF adapter gasket •HD Clamps & all needed hardware Will not fit with most strut tower braces.

  • Color: black
  • Brand: JLT Performance
  • ASIN: B00B3ZEKL6

SR Performance Cold Air Intake - for Ford Mustang GT 1996-2004

SR Performance Cold Air Intake - for Ford

Improves Horsepower. This SR Performance Cold Air Intake kit completely replaces the factory air box and restrictive paper filter element in your 1996-2004 4.6 GT mustang with a high flow filter assembly for a noticeable increase in horsepower and throttle response while filtering out destructive power robbing dust particles. This CAI pulls cooler denser air from inside the inner fender well to make more power that you can feel. Reusable Filter. Included in this kit is a High Flow reusable air filter. So no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go! Polished Finish. A SR Performance Cold Air Intake not only improves horsepower and acceleration, but it also improves your Mustang's under hood appearance with a striking polished aluminum finish. Now you can have the best of both worlds, performance and style. Simple Install. SR Performance Cold Air Intake kits are relatively easy to install with basic hand tools. No extra modifications are required for the installation. Application. This SR Performance Cold Air Intake is specifically designed for the 1996-2004 GT Mustangs equipped with the 4.6L V8 engine. It is not compatible with the 2001 Bullitt.Please Note. The MAF housing and sensor is not included with the...

  • Brand: SR Performance
  • ASIN: B07P62QKT6
  • UPC: 682327941893

DNA MOTORING Silver CAIP-2-HS-FM05V8-SLSL Cold Air Intake Pipe+Heat Shield System [for 05-09 Ford Mustang 4.6L V8]

DNA MOTORING Silver CAIP-2-HS-FM05V8-SLSL Cold Air Intake Pipe+Heat

A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range. This item fits 05-09 Ford Mustang (Fit Models with 4. 6L V8 Engine ONLY)

  • Color: Silver
  • Brand: DNA MOTORING
  • ASIN: B01EZHEDII
  • UPC: 817598028947

For Ford Mustang 4.6L V8 Silver-Coated Aluminum Cold Air Intake Pipe+Heat Shield+Filter

For Ford Mustang 4.6L V8 Silver-Coated Aluminum Cold

A Cold Air Intake System relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows us to deliver the maximum power gains throughout the entire RPM range.Package Included:1 x Air Filter2 x Air Intake PipeSet of Clamps1 x Heat ShieldSilicone Coupler in the Picture AboveCompatible with:05-09 Ford MustangFit Models with 4.6L V8 Engine ONLY

  • Color: SIlver Piping & Heatshield
  • Brand: Auto Dynasty
  • ASIN: B01CDY5E42

Performance Cold Air Intake Kit For 1996 1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang with 4.6L V8 Engine Red

Performance Cold Air Intake Kit For 1996 1997

Fitment for: 1996-2004 Ford Mustang GT 2-Door 4.6L V8 1996-2003 Ford Mustang Base 2-Door 4.6L V8 1998-2003 Ford Mustang Equipado 2-Door 4.6L V8 1996-1997 Ford Mustang High 2-Door 4.6L V8 2003-2004 Ford Mustang Mach 2-Door 4.6L V8 1998 Ford Mustang Semi-Equipado 2-Door 4.6L V8 2004 Ford Mustang SVT Cobra Convertible 2-Door 4.6L V8Note: Please match your vehicle model at the left top to ensure it fit your vehicle Specifications: 1. Material: Aluminum 2. Color: Red 3. Package Dimensions: (10.24 x 7.87 x 15.16)" / (26 x 20 x 38.5)cm (L x W x H) 4. Weight: 6.49lbs Package Includes: 1 x Cold Air Intake Kit

  • Color: Red
  • Brand: MILLION PARTS
  • ASIN: B07NYMR9GK

For Ford Mustang 3.8L 3.9L V6 2-PC 3-1 Shorty Stainless Steel Exhaust Header/Manifold

For Ford Mustang 3.8L 3.9L V6 2-PC 3-1

Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potentialPackage Included:2 X Exhaust Manifold Headers(Left & Right)Hardware as ShownCompatible with:99-04 Ford Mustang 3.8L 3.9L V6

  • Brand: Auto Dynasty
  • ASIN: B0721ZLGMQ

BBK 1705 Twin 62mm Throttle Body - High Flow Power Plus Series for Ford 4.6L- 4V Cobra/V-10/F-Series/Excursion Mach 1 and Bullitt

BBK 1705 Twin 62mm Throttle Body - High

BBK Power Plus 62 millimeter Throttle Body for Ford 4.6L- 4V Cobra/V-10/F-Series/Excursion Mach 1 and Bullitt for all BBK 1996-2004 Mustang Cobra throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on the vehicle and application. All BBK performance power plus series throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts, make BBK throttle bodies the number one in performance and quality.

  • Brand: BBK Performance
  • ASIN: B000CIRA4E
  • UPC: 197975017055

Revell 1:25 2008 Mustang Bullitt

Revell 1:25 2008 Mustang

132556 Features: -2008 Mustang Bullitt.-Special five spoke wheels and grille with no chrome trim.-105+ Highly detailed parts.-Authentic factory stock detailing decals.-No batteries required.-Keep from small children.-Contains small parts which may be swallowed.-For ages 10+. Includes: -Also includes illustrated assembly instructions. Specifications: -Detailed 325 hp V8 with new cold air engine intake. Assembly Instructions: -Assembly required.

  • Brand: Revell
  • ASIN: B001MDPOLY
  • UPC: 031445042348
Similar Bullitt Cold Air Intake Results