Bosch 2-5/8-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8526

Bosch 2-5/8-Inch x 22-Inch SDS Max Rotary Hammer

Bosch HC8526 2-5/8-Inch x 22-Inch Single Piece SDS Max Core Cutter

  • Color: Gray
  • Brand: Bosch
  • ASIN: B0000TZYG6
  • UPC: 094716904783

uxcell 2-Inch Diameter 2-Flute Carbide Cove Core Box Router Bit with 1/2-inch Steel Shank

uxcell 2-Inch Diameter 2-Flute Carbide Cove Core Box

Product Name: Core Box Router BitMaterial: Carbide, SteelWeight: 200gPackage Content: 1 x Core Box Router Bit, 1 x Plastic CaseStandard: 1/2-inch x 2-inchShank Diameter: 1/2-inchCutting Diameter: 50.8mm / 2-inchCutting Radius: 25.4mm / 1-inchCutting Depth: 28.5mm / 1.12-inchOverall Length 75mm / 2.95-inchColor: Blue,Silver ToneMax. Rotation Speed: 18,000 RPM Tool maintenance:Keep tools clean after using them, remove resin, sawdust on the timber, using standard industrial solvent to clean the tool.Apply a small amount of oil can prevent the tool surface rust, clean up all the dirt of the shank to prevent slippage during use.Do not attempt to grind the tool or change the shape of the tool.Notice: When the tool is blunt, replace with a new tool, do not continue to use the tool in order to avoid breakage .Must use a suitable clamp(not included here). If the clamp is not round or worn, it will cause the clamp can not clamp the tool properly, please replace the clamp with standard specification immediately to prevent dangerous situation such as handle shaking, flying off or twisted off when the tool is working at high speed.Come with a plastic case, please be careful when opening the case, this product has a sharp edge.

  • Brand: uxcell
  • ASIN: B01NAUTN6T
  • UPC: 604267110139

Bosch HC8510 2 In. x 12 In. SDS-max Rotary Hammer Core Bit

Bosch HC8510 2 In. x 12 In. SDS-max

Bosch SDS-max carbide-tipped rotary hammer core bits offer an integral shank for better power transmission. Bosch SDS-max rotary hammer core bits with wave design go beyond the range of standard bits and allow smaller hammers to drill larger holes. Wave design transfers energy to bit more effectively for up to 40 percent faster drilling versus previous design.

  • Brand: Bosch
  • ASIN: B0000TZYFC
  • UPC: 000346243215

Bosch T3915SC 2-9/16-Inch Sds-Plus Speedcore Thin-Wall Rotary Hammer Core Bit

Bosch T3915SC 2-9/16-Inch Sds-Plus Speedcore Thin-Wall Rotary Hammer

High-grade tungsten carbide offers durability and life. Ejector hole delivers easy core removal of masonry, brick and block. Works with Bosch one-piece SDS-plus pilot bits and extensions.

  • Brand: Bosch
  • ASIN: B00EMFONIE
  • UPC: 000346430004

Bosch 4-Inch x 17-Inch x 22-Inch SDS Max Rotary Hammer Core Bit HC8555

Bosch 4-Inch x 17-Inch x 22-Inch SDS Max

  • Color: Gray
  • Brand: Bosch
  • ASIN: B0000TZYHK
  • UPC: 754262187305

2-1/2 in. CARBIDE TIPPED BIT, Breakthrough Drill Bit, SDS Max (2.5" X 20" X 24")

2-1/2 in. CARBIDE TIPPED BIT, Breakthrough Drill Bit,

******WARNING: DRILL SHANK IS SDS MAX AND YOUR ROTARY HAMMER MUST BE SDS MAX COMPATIBLE OR THIS WILL NOT FIT. SDS MAX IS NOT INTERCHANGEABLE WITH SDS, OR SDS PLUS!!!***** The 2.5" CARBIDE TIPPED BIT, Breakthrough masonry drill bit is the perfect tool for all masonry applications. With 11 hardened and carbide cutting teeth and and high speed forged steel body, you will drill more holes faster! Compatible with all SDS Max Rotary Hammers!! This bit has a maximum drilling depth of 20 inches. ****This product does not cut through rebar, it is only for use with masonry materials

  • Brand: CARBIDE TIPPED BIT
  • ASIN: B07HXZBCJV
  • UPC: 855717007374

CBTONE 65mm SDS Plus Shank Hole Saw Cutter Concrete Cement Stone Wall Drill Bit, Shank Drill Bit Cutter for Brick Concrete Cement Stone with 220mm Connecting Rod Drill

CBTONE 65mm SDS Plus Shank Hole Saw Cutter

CBTONE Wall Drill Bit Hole Saw Set with SDS PLUS Feature: Material:Metal Color: Silver Size: Cutting Diameter: 65mm / 2.5" Connecting Rod: 220mm / 8.66" Suitable For: brick, concrete walls, air conditioning openings Packing Included: 1 x Wall Hole Drill Bit

  • Brand: CBTONE
  • ASIN: B076Q7S9SN
  • UPC: 657008534244

Core Box Router Bit, EnPoint Round Nose Bit 1/4" Shank Carbide-Tipped 2 Flutes Radius Core Box Router Bit 7/8" Cut Diameter 13.5mm Cut Height Woodworking CNC Round Groove Router Bit

Core Box Router Bit, EnPoint Round Nose Bit

Specifications: Bit Type: Round nose bit Shank diameter: 1/4 inch (6.35mm) Cutter diameter: 7/8 inch (22.2mm) Cutter height: 17/32 inch (13.5mm) Total length: 2-9/32 inches (58mm) Material: High-speed steel body and shank, carbide-tipped edge Application: 1. Commonly used for sign-making, and are also ideal for fluted columns, millwork, finger pulls, drain grooves on cutting boards, drip rails for window sills and more. 2. Can cut rounded grooves and slots perfectly for a variety of materials from wood panels, flakeboard, plywood, MDF and other wood composites sheet materials; can also be used in all handled and table mounted routers. Package: Pack of 1 Note: The metric sizes were relatively precise

  • Brand: EnPoint
  • ASIN: B018RSX0EY
  • UPC: 706795868282

Core Box Router Bit Double Flute Round Nose Router Bit Carbide Tipped Woodworking Tool Round Groove Router Bit 1/2'' Radius x 1'' Dia. x 1/2 inch Shank (1/2X1)

Core Box Router Bit Double Flute Round Nose

  • Color: 1/2 inch Shank
  • Brand: TIDEWAY
  • ASIN: B07MJJWNDV
  • UPC: 791280333956

Yonico 14360q 3 Bit Core Box Long Reach Router Bit Set, 1/4-Inch Shank

Yonico 14360q 3 Bit Core Box Long Reach

Designed for sign making and general round nose grooving. Includes 3 core box router bits with diameters - 1/4", 3/8" & 1/2". With an overall height of 2-3/8", the Yonico 14360q router bit set is ideal for long reach core box grooving. Two flute carbide cutters and 1/4" shanks.

  • Brand: Yonico
  • ASIN: B00KZM1SX6
  • UPC: 765573826517

Dry Core Bit for Brick and Concrete Block with Pilot Bit - 4" Diameter - 1/2" Shank Arbor - #30/40 Diamond

Dry Core Bit for Brick and Concrete Block

Designed for drilling masonry, concrete block and brick - Pilot Bit Included - Multiple sizes available - 4" Diameter - Thread: 1/2" Shank - Drilling depth: 9.5" - High diamond concentration and quality guarantee longer coring life

  • Brand: EDiamondTools
  • ASIN: B01N397RRT
  • UPC: 727363142900

Rannb 1-Inch Cutting Diameter Carpenter Woodworking Round Nose Cove Box Router Bit with 1/4-inch Steel Shank-Pack of 1

Rannb 1-Inch Cutting Diameter Carpenter Woodworking Round Nose

Package content: 1 x Core Box Router Bit storaged in a hard plastic box A professinoal tool designed for a variety of materials from wood panels, flakeboard, plywood, MDF and other wood composites sheet materials.Commonly used for sign-making. If you have any question to the product, please feel free to contact us. We are more than happy to answer any question you might have.

  • Brand: Rannb
  • ASIN: B07FSK6FMP
  • UPC: 675234793877

Milwaukee 48-20-5160 5-Inch Thick Wall Core Bit

Milwaukee 48-20-5160 5-Inch Thick Wall Core

SDS-MAX/SPLINE CORE 5" X 4-1/16". The product is easy to use. The product is durable. The product is manufactured in Japan.

  • Brand: Milwaukee
  • ASIN: B00004XPBE
  • UPC: 045242106202

Diamond Drill Bits, Baban 10Pcs Hole Saw Diamond Drill Bit Hollow Core Drill Bit Set for Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble, 6-32mm

Diamond Drill Bits, Baban 10Pcs Hole Saw Diamond

Features: --100% brand new and high quality. --Can be used with a standard electric drill. --Always use lubrication (water), otherwise the diamond core drill will burn. --Materials and only needs water for lubrication. --This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other. Specifications: Size: 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 14mm/0.55", 16mm/0.62", 18mm/0.7", 22mm/0.86", 26mm/1.02", 32mm/1.26" Material: Steel Use note: Start your hole diagonally, make a round trace and then hold drill straight. Package includes: 10 x Diamond Holes Saw Drill Bits

  • Brand: Baban
  • ASIN: B01L92YM1A

uxcell Router Bit 1/4 Shank 3/4 Cutting Dia. Core Box 2 Flutes Carbide Tip for Carpentry Woodworking Milling Cutter Tool

uxcell Router Bit 1/4 Shank 3/4 Cutting Dia.

Specification:Material: CarbideNet Weight: 28gShank Diameter: 1/4 inch / 6.35mmCutting Diameter: 3/4 inch / 19.05mmCutting Radius: 0.37 inch / 9.52mmCutting Depth: 0.55 inch / 14mmTotal Length: 1.78 inch / 45.3mmFeature:Double fluted design for sharp and long lasting cutting.Applied to routing, inlaying, mortising in wood and other soft materials.Add new creation to cabinet doors, drawer fronts, and fluted mill work, or use these bits to engrave wood signs.Provides cleaning and sharp cutting action, cuts all composition materials, plywood, hard wood, and soft wood.Used on hand held and table mounted portable routers, great router bit replacement for woodworking carpenters. (Routers are not included here)Package Included:1 x Core Box Router Bit

  • Color: Black
  • Brand: uxcell
  • ASIN: B07K47JH5K
Similar Carbide Core Bit Results