Dremel 543 1-1/4 inch Cutting/Shaping Wheel

Dremel 543 1-1/4 inch Cutting/Shaping

Dermal 543 Cutting wheel 1-1/4"

  • Color: Silver
  • Brand: Dremel
  • ASIN: B000HI5WUS
  • UPC: 732454797464

8" x 1.5" CBN Grinding Wheel, 5/8" Bore - Sharpen High Speed Steel & Carbide Tools (180 Grit)

8" x 1.5" CBN Grinding Wheel, 5/8" Bore

With the 8" CBN Grinding Wheels you won't have to worry about dressing or shaping like typical aluminum oxide wheels. These wheels don't wear! The CBN wheels are machined from solid steel and are bonded with Cubic Boron Nitride (CBN). Use the CBN wheels for any sharpening projects, including; turning tools, chisels, plane irons and more. With the 8" CBN Grinding Wheels you will achieve a super fine, sharp edge with polished bevel on either hardened tool steel or carbide. These wheels can make almost any grinder perform at a much higher level. Just think about not having to prepare your grinding stone by dressing and shaping it each time, simply turn on your grinder and get to sharpening without any hassle. Designed for use with Slow Speed Grinders. The CBN Grinding Wheel comes in 80 & 180 Grit 8" x 1-1/2' width & 5/8" side sharpening and the bore opening is 5/8" in diameter. Caution: CBN Grinding Wheels are designed to be used to sharpen hardened Steel or Carbide. Sharpening non-heat treated steel, aluminum or other soft metals will damage the CBN Grinding Wheel.

  • Brand: Peachtree Woodworking
  • ASIN: B01GG5GIEY
  • UPC: 814310017449

Kutzall Extreme Shaping Dish - Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore - DW412X90

Kutzall Extreme Shaping Dish - Coarse, Tungsten Carbide

The must-have, most versatile angle grinder accessory. Whether you are a casual hobbyist or professional craftsman, Kutzall's durable carbide coatings will last job after job. Kutzall Dish Wheels are the perfect tool for concave shaping - giving you effortless control while saving you time. Their rounded form and rapid cutting action make them excellent for contouring sculpted chairs, large bowls, even dimensional lumber. For free-hand grinding and shaping, you can expect to "Do It All, With Kutzall". These tools are fast-cutting and long lasting, designed to work easily and efficiently where other conventional tools fail. Their tungsten carbide coatings consist of hundreds of extremely sharp teeth that rapidly remove stock and outlasts hundreds of sandpaper pads. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch. Kutzall Extreme tools use more aggressive, free-cutting teeth arranged in a regular pattern of rows and columns. They are the fastest-cutting Kutzall tools on most materials and are excellent for 'heavy hogging' applications. The open patterns of these teeth are very resistant to loading, even on gummy materials. Recommended Max RPM is 15,000. Compatible with most angle grinders including: Makita, Bosch, Dewalt, Black...

  • Brand: Kutzall
  • ASIN: B01IU75GSU
  • UPC: 795092505495

Dremel EZ544 EZ Lock Wood Cutting Wheel

Dremel EZ544 EZ Lock Wood Cutting

Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447).

  • Color: As the picture shown
  • Brand: Dremel
  • ASIN: B000WMK8FI
  • UPC: 886461497081

Dremel 801 Carbide Rotary Tool Shaping Wheel

Dremel 801 Carbide Rotary Tool Shaping

Dremel Model 801 - This 1-1/4"-diameter carbide wheel is a powerful shaping tool that quickly and efficiently removes material. This accessory easily creates compound curves and works on a variety of materials, including wood, fiberglass, laminates, plastic and leather. This accessory should not be used for cutting. Mandrel sold separately.

  • Color: Gray
  • Brand: Dremel
  • ASIN: B0006O4FH4
  • UPC: 080596017958

PROMMON 5Pcs Ti-coated Saw Blades Rotary Tool & 5Pcs Stainless Steel Wood Cutting Wheel Saw Blade Discs & 2Pcs 3mm Twist Drill Bit For Prommon Dremel Rotary Tools Pack Of 12Pcs

PROMMON 5Pcs Ti-coated Saw Blades Rotary Tool &

PROMMON 5Pcs Ti-coated Saw Blades Rotary Tool Circular Saw Blade Mandrel & 5Pcs Stainless Steel Wood Cutting Wheel Saw Blade Discs & 2Pcs 3mm Twist Drill Bit For Prommon Dremel Rotary Tools Pack Of 12Pcs Features: High Speed Steel blades set for accurate, fast and precision cutting Suitable for timber, plastic, fiberglass, copper, aluminium & thin sheet metal etc. soft metal An indispensable tool for carving work Material: High speed steel Product Size: 22 (25 / 32 / 35 / 44) x 1 x 6.35mm Extension Rod Diameter: 3.175mm Please Note: Must tighten the screw before using it. Because electric mill is a high-speed operation tool, with a certain risk. Further, the rod must be clamped at the position of two-thirds above. Speed must be controlled within 20,000 rpm. Do not press hard cut to hard things, remember the safe operation is the first. Please take good protection measures. Package Weight : 56 G / 1.98 Ounces Package Dimensions (L*W*H) : 185*11*10 MM / 7.28*0.43*0.39 Inches Package Include: 1 x HHS Saw Blade (22 x 1 x 6.35mm) 1 x HHS Saw Blade (25 x 1 x 6.35mm) 1 x HHS Saw Blade (32 x 1 x 6.35mm) 1 x HHS Saw Blade (35 x 1 x 6.35mm) 1 x HHS Saw Blade (44 x 1 x 6.35mm) 1 x Extension Rod 5 X 22mm Wood Saw Blade 2 X 3mm Twist Drill Bit

  • Color: 12Pcs Saw Blade
  • Brand: PROMMON
  • ASIN: B074WBP142
  • UPC: 702382507343

Kutzall Extreme Shaping Disc - Very Coarse, Tungsten Carbide Coating: 4-1/2" (114.3mm) Diameter x 7/8" (22.2mm) Bore - SD412X120

Kutzall Extreme Shaping Disc - Very Coarse, Tungsten

The must-have, most versatile angle grinder accessory. Whether you are a casual hobbyist or professional craftsman, Kutzall's durable carbide coatings will last job after job. Kutzall Carving Discs are the perfect tool for flat or convex shaping - giving you effortless control while saving you time. They have a nearly flat shape with just a slight curvature for the most effective use of the coated area. Their rapid cutting action and incredibly smooth operation make them excellent for contouring sculpted chairs, large bowls, even dimensional lumber. For free-hand grinding and shaping, you can expect to "Do It All, With Kutzall". These tools are fast-cutting and long lasting, designed to work easily and efficiently where other conventional tools fail. Their tungsten carbide coatings consist of hundreds of extremely sharp teeth that rapidly remove stock and outlasts hundreds of sandpaper pads. They are not prone to loading but may easily be cleaned with solvent or burned clean with a gas torch. Kutzall Extreme tools use more aggressive, free-cutting teeth arranged in a regular pattern of rows and columns. They are the fastest-cutting Kutzall tools on most materials and are excellent for 'heavy hogging' applications. The open patterns of these teeth are very resistant to loading, ev...

  • Brand: Kutzall
  • ASIN: B00EIO0Q2Q
  • UPC: 818050020127

4-1/2" Angle grinder wood cutting wheel, carbide shaping disc, woodworking carving saw blade with 7/8" arbor

4-1/2" Angle grinder wood cutting wheel, carbide shaping

Inner Diameter Arbor Size: 7/8 Inch (22mm) Thickness: 2.2mm Tooth: 3-Tooth Maximum speed: 12200 RPM Sawblade Material: YG8 Hard Alloy Body Material: High Carbon Steel Work Material: wood, aerated concrete, plasterboard, plastic, plywood, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard. Intended Use: cutting, engraving, shaping, grinding and finish grinding, grooving, straight and cross-cutting any type of wood; universal wood graver (sculptor).

  • Brand: scimaker
  • ASIN: B07RSQ8B6Y

Dura-Grit SR-YEL-004 Carbide Carving Cutting and Shaping Wheel Set

Dura-Grit SR-YEL-004 Carbide Carving Cutting and Shaping Wheel

Founded in 1993, Dura-GRIT is known for its high-quality and long-lasting carbide sanding tools and Dremel drill power carving burrs. Made in North America from tungsten carbide and steel, Dura-GRIT tools last 100x longer than sandpaper, making them the most versatile and durable cutting and shaping tools on the market. This 4-pc. DIY Carbide Rotary Tool Set for Woodworking comes with four hi-speed versatile carbide burrs. They can be used to cut, carve and drill the following materials: modelling plywood, bass wood and balsa etc., fiberglass sheets and molded parts, composites, carbon fiber rods and sheets, ABS parts, PVC items, rubber, leather and more. The 1-1/4" 60-grit Carbide Mushroom Shaping Wheel (SR-MSW-060) gives you rapid material removal and a smooth sanded finish. It shapes and finishes in one operation. The Hollow Tip Drum Hole/Saw (SR-HT2-080) allows you to fast-cut holes with a clean edge as small as 1/2" and enlarge them. Imagine drilling holes from 1/8" without needing a center punch with the Pointed Detail Burr (SR-PB8-080). Finally, the 1-1/4" 60-grit Carbide Cutting/Shaping Wheel (SR-CS4-060) will have you putting your chisels back in the drawer. This set saves you time and money, giving you more time for creativity and more detail to your finished p...

  • Brand: Dura-GRIT
  • ASIN: B007ODTOIU
  • UPC: 872444000317

TOVIA 3 Teeth Wood Cutting Shaping Disc for Angle Grinder,Multipurpose Carving Wheel,Stump Log Grinder Attachment with 7/8" Arbor

TOVIA 3 Teeth Wood Cutting Shaping Disc for

  • Brand: T TOVIA
  • ASIN: B07MQ4GY8T

King Arthur Tools 2" Tungsten Carbide Coarse Disc

King Arthur Tools 2" Tungsten Carbide Coarse

Now carvers who are working on a smaller scale can enjoy the rapid, yet controlled, stock removal that large scale carvers have enjoyed for years. Only 2" in diameter, it reaches into tight areas which previously had to be carved and smoothed by hand. You can smooth and finish shape with the tungsten carbide disc. Discs are designed to be driven by the powerful and proven Proxxon long neck mini grinder, which features electronic speed control from 3,300 to 13,000 rpm. All discs have a 10mm arbor.

  • Brand: King Arthur's Tools
  • ASIN: B000X3NDV2
  • UPC: 730205100099

TACKLIFE ARTO2C 282-Piece Rotary Tool Accessories Kit 1/8-inch Diameter Shanks Universal Fitment for Easy Cutting, Grinding, Sanding, Sharpening, Carving and Polishing

TACKLIFE ARTO2C 282-Piece Rotary Tool Accessories Kit 1/8-inch

Tacklife - Professional team on Amazon, which deals only with development of the tools. We commit ourselves to using qualitative tools to improve the quality of life. ✔Cutting: Cutting wheels, fiberglass cutter of wheel: cut thin metal Diamond cutting disc: Cut jade, thin iron plate ✔Sanding: Sanding bands: Grind, polish, mold, remove paint for wooden furniture Sanding paper: Grind and polish for wooden furniture Flap wheel:Polish and remove on surface of heavy-duty material ✔Grinding & Sharpening: Aluminum oxide grinding wheels: universal type that used for grinding and sharpening metals Silicon carbide grinding wheels: especially used for grinding glass, ceramic tile and metal Whet Stone: grinding high-speed steel cutting tools, grinding hard and brittle materials such as ceramics ✔Cleaning: Nylon brush and Stainless steel brush: remove dust and dirt ✔Polishing: Rubber wheels: polish metal, glass, stone Wool wheels: removes stains, polishmetal Red grinding paste: polish metal with the wool wheel ✔Drilling: HSS drill bit: drill for wood and plastic ✔Carving & Engraving: HSS milling cutter: mold, chamfer and engroove for wood and plastic Diamond pointed wheel: carve on metal, ceramic tile, and glass ✔Others: Mandrel: connect with grinding wheel, sanding paper an...

  • Brand: TACKLIFE
  • ASIN: B075R32VF9
  • UPC: 689749208450

4.5" x 7/8" Premium High Density Jumbo Zirconia Type 29 Flap Disc 40 Grit - 10 Pack

4.5" x 7/8" Premium High Density Jumbo Zirconia

Flap discs are used in heavy stock removal, often weld removal. They outperform Resin Fiber Discs due to their increased lifetime and last twice as long as Aluminum Oxide discs. To achieve a finish equivalent to a Resin Fiber Disc, always use a flap disc one grit coarser. e.g. If the operator is running a 60 grit Resin Fiber Disc, try a 40 grit flap disc. This 40 grit flap disc is made with Zirconia Alumina grain, which is ideal for stainless steel and metal applications while still working well with non-ferrous applications. The Type 29 angled face allows for 90% of the abrasive material to be in contact with work surface, yielding maximal grinding surface area for greater ease, effectiveness and speed. We use a high quality backing plate to help absorb vibration. Specific suited applications include: weld blending, removing weld slag, deburring, edge blending, surface conditioning and general metal fabrication. 'Jumbo' or 'High Density' flap discs usually contain 30-60% more surface area for grinding.

  • Brand: Benchmark Abrasives
  • ASIN: B01D0HA3LK
  • UPC: 072802810699

Dura-Gold Premium - Variety Pack - 5" Gold Sanding Discs - 8-Hole Dustless Hook and Loop - 10 each of Grit (60, 80, 120, 220, 320) -Box of 50 Sandpaper Finishing Discs for Woodworking or Automotive

Dura-Gold Premium - Variety Pack - 5" Gold

  • Brand: Dura-Gold
  • ASIN: B07DTFSQVF
  • UPC: 848849005639

Arbortech Turbo Plane

Arbortech Turbo

The Arbortech Turbo Plane is a universal freehand wood shaping tungsten carbide toothed blade that can be used in a number of ways to create different profiles and finishes. This blade differs significantly from other Arbortech blades in that it is specifically designed to be laid flat with a rotary planing action. It has no cutting edge on the outer perimeter, which makes it safer and easier to use than other freehand blades.

  • Brand: Arbortech
  • ASIN: B008NA2IJ0
  • UPC: 096526000501
Similar Carbide Shaping Wheel Results