uxcell 1/2-Inch Shank 2-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit

uxcell 1/2-Inch Shank 2-Inch Cutting Dia Double Flute

Material: Carbide, SteelStandard: 1/2 Inch x 2 InchShank Diameter: 12.7mm / 1/2 InchCutting Diameter: 50.8mm / 2 InchCutting Depth: 15mm / 0.6 InchOverall Length: 53mm / 2.1 InchColor: Blue, Silver TonePackage Content: 1 x Cleaning Bottom Bit, 1 x Case 1.Mainly used for cutting and smoothing a variety of materials from wood, plywood, MDF and other wood composites, plastics, fiberglass, and solid surface etc.2.Use on CNC and other automatic routers as well as hand held and table mounted portable routers.Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

  • Brand: uxcell
  • ASIN: B01N2UQETH
  • UPC: 709874833539

Straight Router Bit Double Flute Plunge Router Bit Carbide Tipped Woodworking Tool 1/4'' Shank Cutting Dia. 5/16 inch

Straight Router Bit Double Flute Plunge Router Bit

  • Color: Cutting Dia. 5/16 inch
  • Brand: TIDEWAY
  • ASIN: B07MFTMCF2
  • UPC: 682604647944

Bosch 85265MC 3/4 In. x 1-1/4 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85265MC 3/4 In. x 1-1/4 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Color: Metal
  • Brand: Bosch
  • ASIN: B000GY9SWQ
  • UPC: 000346335446

Bosch 85232MC 3/4 In. x 3/4 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85232MC 3/4 In. x 3/4 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B000GYG2OI
  • UPC: 000346351651

Amana Tool - 45453 Carbide Tipped Straight Plunge High Production 1-3/4 Dia x 1-1/4 x 1/2

Amana Tool - 45453 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45453, diameter (D): 1-3/4, cutting height (B): 1-1/4, Shank (D): 1/2, overall length (L): 2-7/8, max RPM: 24, 000, flutes: 2, 45453 carbide Tipped straight plunge high production 1-3/4 dia x 1-1/4 x 1/2 inch shank

  • Brand: Amana Tool
  • ASIN: B0002DSVZQ
  • UPC: 738685854532

Accusize Industrial Tools Double Flute Extra Long Straight Carbide Tipped Router Bit, 1/2'' Diameter, 3'' Depth, 1/2'' Shank, 4.7'' Oal, 0021-0828

Accusize Industrial Tools Double Flute Extra Long Straight

Accusize Tools - 1/2 Dia. x 3" Depth Double Flute Extra Long Straight Router Bit with 1/2 Shank, Industrial Quality, 0021-0828 Individually dynamic balanced. Kickback reducing design; Carbide tipped double flute straight bits are designed to provide excellent smoothness of cut and balanced cutting with minimal vibration. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Cuts all composite materials, softwoods, plywood, hardwoods, glass fiber, and plastic, Especially for hipboard(melamine board), glass fiber reinforced plastics(carbon fiber material), MDF, etc. These Professional router bits are characterized by higher hardness and longer life and resulting in nice finishing on woody pieces after cutting; Compared with the similar products, this product is more than two times life longer. Straight Router Bit; High-quality structural carbon steel #45 2 Flute Carbide Tipped; Straight Shank Shank Diameter: ½" Cutting Diameter: ½" Flute Length: 3" Overall Length: 4.7" Colour: professional Silver; Weight: 90 g

  • Brand: Accusize Industrial Tools
  • ASIN: B07CTVZR7G
  • UPC: 637665774818

Bosch 85225MC 3/8 In. x 1 In. Carbide-Tipped Double-Flute Straight Router Bit

Bosch 85225MC 3/8 In. x 1 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, extended bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B002M8D870
  • UPC: 000346351620

Amana Tool - 45415 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1-1/4 x 1/2 In

Amana Tool - 45415 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45415, diameter (D): 3/8, cutting Height (B): 1-1/4, Shank (D): 1/2, overall length (L): 3 flutes: 2, 45415 carbide Tipped straight plunge high production 3/8 dia x 1-1/4 x 1/2 inch Shank

  • Brand: Amana Tool
  • ASIN: B0002DSV74
  • UPC: 738685854150

Amana Tool - 45427 Carbide Tipped Straight Plunge 1/2 Dia x 2-1/2 x 1/2" Shank

Amana Tool - 45427 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45427, diameter (D): 1/2, cutting height (B): 2-1/2, Shank (D): 1/2, overall length (L): 4-1/2, flutes: 2, 45427 carbide Tipped straight plunge 1/2 dia x 2-1/2 x 1/2 inch shank

  • Brand: Amana Tool Corporation
  • ASIN: B0002DSV92
  • UPC: 738685854273

1/4-Inch Shank 1/2-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit Woodwork Cutter for CNC

1/4-Inch Shank 1/2-Inch Cutting Dia Double Flute Carbide

TIDEWAY Industrial Quality Cleaning Bottom Router Bit, 1/4-Inch Shank 1/2-Inch Cutting Dia Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Specifications: Shank Diameter: 1/4 Inch Cutting Diameter: 1/2 Inch Cutting Depth: 13mm/ 0.51Inch Color: Blue, Silver Tone Package: 1 x Cleaning Bottom Bit, 1 x Case Material: Balance: +/- .003" tolerance Body: Solid Hardened Steel(45+Hardness) Blade: Industrial grade micro grain carbide(HRA92) Cutter: CNC ground to a 600 grit, mirror-like finish Material: Alloy blade, carbon steel handle Safety Instructions: 1. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. 2. The bladed product is not use for people under 18 years old. 3. The item is only for industrial cutting/engraving, not hazardous article. 4.Please wear goggles and use ear protection equipment when working. 5.Avoid getting your body or clothes close to the tool when using. What Else Will TIDEWAY Do For You - 7x24 hours customer service. - 30 days unconditional return policy. - 1 year manufacturer warranty for parts.

  • Color: 1/4" Shank
  • Brand: TIDEWAY
  • ASIN: B07H8JMWD7
  • UPC: 681013192076

Amana Tool - 45470 Carbide Tipped Straight Plunge 5/8 Dia x 3/4 x 1/4" Shank with Uppe

Amana Tool - 45470 Carbide Tipped Straight Plunge

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge As the cutting edges rout the workpiece, forming an exact Duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work, #45470, diameter (D): 5/8, cutting height (B): 3/4, shank (D): 1/4, overall length (L): 2-5/8, type: Straight, replacement bearing: 47712, Keller, Umber: 1643/1543 flutes: 2 45470 carbide Tipped straight plunge 5/8 dia x 3/4 x 1/4 inch shank with upper Bb

  • Brand: Amana Tool
  • ASIN: B001UTV60S
  • UPC: 738685454701

Amana Tool - 45426 Carbide Tipped Straight Plunge 1/2 Dia x 2" x 1/2 Shank

Amana Tool - 45426 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced, #45426, direction: down-cut, diameter (D): 1/2, cut depth (a): 1/4, angle (a°): 0°, radius, r): .015 (.4mm), cutting height (B): 2, shank (D): 1/2, overall length (L): 4-1/4, 45426 carbide Tipped straight plunge 1/2 dia x 2 inch x 1/2 shank

  • Brand: Amana Tool
  • ASIN: B0002DSV8S
  • UPC: 738685854266

Amana Tool - 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1" 4 S

Amana Tool - 45210 Carbide Tipped Straight Plunge

Use a Two-Flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution Yield a smooth surface, but feed rate is slightly reduced, #45210, diameter (D): 1/4, cutting height (B): 1, shank (D): 1/4, overall length (L): 2-1/4, flutes: 2, 45210 carbide Tipped straight plunge high production 1/4 dia x 1 inch x 1/4 shank

  • Brand: Amana Tool
  • ASIN: B000JJPR46
  • UPC: 785533287110

DLtools 1/2 Inch Double Flute Extra Long Straight Carbide Tipped Router Bit,Industrial Quality,(1/2 inch Cutting Dia.x 2-1/2 inch Cutting Length) for Woodworking,1pcs

DLtools 1/2 Inch Double Flute Extra Long Straight

Spec: Name: Two Flutes Super Duty Straight Router Bit with 1/2" Shank Dimension: Cutting Diameter: 1/2 inch Cutting Length: 2-1/2 inch Shank Diameter: 1/2 inch Overall Length: 4-1/2 inch Material: Carbide Tipped Package Include:  1 x Straight Router Bit 1 x Plastic Transparent Tube ★Tips: ⚠  Be sure to carefully check the size of the product before you purchase to make sure it is what you need. ♥  If you are a beginner, prefer watch some Guided videos before your work,which can help you operate more accurately with as little damage to Bits as possible!

  • Color: Black
  • Brand: DL TOOLS
  • ASIN: B07DB55693
  • UPC: 747742931499

CMT 812.691.11B Pattern Bit with Bearing, 1/2-Inch Shank, 3/4-Inch Diameter, Carbide-Tipped

CMT 812.691.11B Pattern Bit with Bearing, 1/2-Inch Shank,

Carbide tipped to last longer, this bit is equipped with the bearing above the cutter letting you work with the template on top of the wood. This gives you a clear view of what you are routing so you can work confidently and accurately. Pair up the tool with your template to produce cabinet and furniture pieces, signs, toys and any other creative project. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4HN3I
  • UPC: 664252017973
Similar Carbide Tipped Straight Router Bit Results