Amana Tool - 46124 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 1/2 Dia x 1-5/8 x

Amana Tool - 46124 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish, #46124, direction Up-cut, (D) diameter 1/2, (b) Cutting height 1-5/8, (D) shank 1/2, overall length (L) 4, flutes 3, CNC solid carbide roughing spiral 3 flute chipbreaker 1/2 dia x 1-5/8 x 1/2 inch Shank Up-cut router bit

  • Brand: Amana Tool
  • ASIN: B000P4QG8G
  • UPC: 738685461242

Amana Tool - 46129 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 3/8 Dia x 1-1/4 x

Amana Tool - 46129 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish, #46129, direction Up-cut, (D) diameter 3-5/64, (B) Cutting height 1-1/4, (D) shank 3/8, overall length (L) 3, flutes 3, CNC solid carbide roughing spiral 3 flute chipbreaker 3/8 dia x 1-1/4 x 3/8 inch Shank Up-cut router bit

  • Brand: Amana Tool
  • ASIN: B0112TJSLO
  • UPC: 738685466629

Amana Tool - 46223 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 3/8 Dia x 1-1/4 x

Amana Tool - 46223 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish., #46223, direction down-cut, (D) diameter 3/8, (b) Cutting height 1-1/4, (D) shank 3/8, overall length (L), flutes 3, 46223 CNC solid carbide roughing spiral 3 flute chipbreaker 3/8 dia x 1-1/4 x 3/8 inch shank down-cut router bit

  • Brand: Amana Tool
  • ASIN: B0112TJV9S
  • UPC: 738685466223

Amana Tool - 46126 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 1/2 Dia x 2"

Amana Tool - 46126 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish, #46126, direction Up-cut, (D) diameter 1/2, (b) Cutting height 2, (D) shank 1/2, overall length (L) 4-1/2, flutes 3, CNC solid carbide roughing spiral 3 flute chipbreaker 1/2 dia x 2 inch x 1/2 shank Up-cut router bit

  • Brand: Amana Tool
  • ASIN: B000P4UKF6
  • UPC: 738685461266

Amana Tool - 46226 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 1/2 Dia x 2"

Amana Tool - 46226 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish., #46226, direction down-cut, (D) diameter 1/2, (b) Cutting height 2, (D) shank 1/2, overall length (L) 4-1/2, flutes 3, 46226 CNC solid carbide roughing spiral 3 flute chipbreaker 1/2 dia x 2 inch x 1/2 shank down-cut router bit

  • Brand: Amana Tool
  • ASIN: B000P4OPF2
  • UPC: 738685462263

Amana Tool 46141 Solid Carbide Roughing Spiral 3 Flute Chipbreaker 1/4 Dia x 7/8 Cut Height x 1/4 Shank x 2-1/2 Inch Long Up-Cut Router Bit

Amana Tool 46141 Solid Carbide Roughing Spiral 3

CNC Solid Carbide Roughing Spirals-3 Flute Chipbreaker-Upcut

  • Brand: Amana Tool
  • ASIN: B07JBBX31C
  • UPC: 738685461419

Amana Tool 46151-K CNC SC Spektra Extreme Tool Life Coated Phenolic, Resin and Composite Cutting with Chipbreaker Slow Helix Up-Cut 3/8 D x 1 CH x 3/8 SHK x 3 Inch Long x 3 Flute Router Bit

Amana Tool 46151-K CNC SC Spektra Extreme Tool

CNC Solid Carbide Spektra Extreme Tool Life Coated Bits are made by Amana Tool, the leading manufacturers of high-quality wood-cutting tools. Amana Tool #46260-K SC Spektra Extreme Tool Life Coated Carbon Fiber Cutting Down-Cut 1/8 D x 1/2 CH x 1/8 SHK x 2 Inch Long Router Bit designed to produce a minimum failure in composite materials such as layers separating and a significant loss of mechanical toughness. Excellent for: Carbon Fiber, Carbon Fiber Reinforced Polymer (CFRP), Carbon Graphite, Composite Materials, Fiber Glass, Fiberglass PCB Board, Fiber Reinforced Plastic (FRP), Glass Fiber Reinforced Polymer - Plastic Materials (GFR), Glass Reinforced Plastic (GRP), G10 = High-pressure fiberglass laminate, a kind of composite material, G10 / FR-4 Glass Epoxy Composite Laminate Material, G11 / FR-5 Glass Epoxy Composite Laminate Material, Phenolic, Phenolic "Garolite" G-7, Plastic PVC & Acrylic. SPECIFICATIONS: (D) Diameter: 1/8; (B) Cutting Height: 1/2; (d) Shank: 1/8; Overall Length (L): 2; Flutes: 10.

  • Brand: Amana Tool
  • ASIN: B07PX8GTBX
  • UPC: 738685461518

Amana Tool - 46224 CNC Solid Carbide Roughing Spiral 3 Flute Chipbreaker 1/2 Dia x 1-5/8 x

Amana Tool - 46224 CNC Solid Carbide Roughing

Specially designed for high RPM/feed rate CNC routers. Unique chipbreaker design is available with 'Up-cut' Or 'down-cut'. Will leave a wavy striated finish., #46224, direction down-cut, (D) diameter 1/2, (b) Cutting height 1-5/8, (D) shank 1/2, overall length (L) 4, flutes 3, 46224 CNC solid carbide roughing spiral 3 flute chipbreaker 1/2 dia x 1-5/8 x 1/2 inch shank down-cut router bit

  • Brand: Amana Tool
  • ASIN: B000P4OPEI
  • UPC: 738685462249

Freud 75-610 1/2-Inch Diameter by 1-5/8-Inch Height 3 Flute Chip Breaker Up

Freud 75-610 1/2-Inch Diameter by 1-5/8-Inch Height 3

Chipbreaker edges are ideal for fast cutting applications in hard materials. 1/2" Overall Dia (D), 1-1/8" Cutting Length (h), 1/2" Shank, 3-1/2" Overall Length (H). Application: Fast cuts in hard, dense materials such as composites, hardwood and hardwood plywood. Made In Italy.

  • Brand: Freud
  • ASIN: B001J9K628
  • UPC: 008925059905

Southeast Tool SRD560TCB Chipbreaker, Down, 1/2" Cutting Diameter x 1 5/8" Cutting Length x 1/2" Shank x 3 1/2" Length x 3 Flute, Solid Carbide

Southeast Tool SRD560TCB Chipbreaker, Down, 1/2" Cutting Diameter

Solid Carbide Bits. Solid carbide cutting tools, such as drills and end mills, are thermally stable and offer high resistance to abrasive wear. Carbide is brittle, however, and rough handling, misuse, or misalignment can lead to broken tools and/or poor tool life.

  • Brand: Southeast Tool
  • ASIN: B003S7MO7O

Magnate 2160 Spiral 3 Flute Chipbreaker Router Bit - Down Cut; 5/8" Cutting Diameter

Magnate 2160 Spiral 3 Flute Chipbreaker Router Bit

This micrograin solid carbide spiral bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits; Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top.

  • Brand: MAGNATE
  • ASIN: B00CCLWRVU
  • UPC: 637881821600

Magnate 2060 Spiral 3 Flute Chipbreaker Router Bit - Up Cut; 5/8" Cutting Diameter

Magnate 2060 Spiral 3 Flute Chipbreaker Router Bit

This micrograin solid carbide spiral bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits; Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top.

  • Brand: MAGNATE
  • ASIN: B00CCLWR7O
  • UPC: 637881820603

Amana Tool 46130 Solid Carbide Roughing Spiral 3 Flute Chipbreaker 3/4 Dia x 2-1/4 Cut Height x 3/4 Shank x 4-1/2 Inch Long Up-Cut Router Bit

Amana Tool 46130 Solid Carbide Roughing Spiral 3

Amana 46130 SC SPIRAL 3/4" DIA. ROUGHING

  • Brand: Amana
  • ASIN: B000P4OIZO
  • UPC: 738685461303

Magnate 2166 Spiral 3 Flute Chipbreaker Router Bit - Down Cut; 5/8" Cutting Diameter

Magnate 2166 Spiral 3 Flute Chipbreaker Router Bit

This micrograin solid carbide spiral bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits; Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top.

  • Brand: MAGNATE
  • ASIN: B0007XH7HY
  • UPC: 637881821662

Magnate 2168 Spiral 3 Flute Chipbreaker Router Bit - Down Cut; 3/4" Cutting Diameter

Magnate 2168 Spiral 3 Flute Chipbreaker Router Bit

This micrograin solid carbide spiral bit is designed for higher feed rate, smooth cut on hardwoods, plywoods and dense materials. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits; Note : An up-cut spiral bit is used where an upward chip removal and a good finish on bottom are required. When using an up-cut spiral bit, chip removal is optimized but adequate hold down is also needed. A down-cut spiral bit is used where a downward chip removal and a good finish on top are required. A down-cut spiral bit provides downward pressure on the material and leaves an excellent finish on the top.

  • Brand: MAGNATE
  • ASIN: B0007XFSP2
  • UPC: 637881821686
Similar Chipbreaker 3 Flute Results