The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

The Dust Deputy Deluxe Anti-Static Cyclone Separator 5

Tired of using your shop vacuum and getting poor results? Oneida Air's Dust Deputy will transform your shop vacuum and the way you work! Trap dust in the barrel and NOT in your shop vacuum. Filters over 99% of sanding dust; less than 1% goes into the vacuum. Extends the life of your shop vacuum and your filters. Extremely efficient, cyclonic pre-separator for wet/dry vacuums. Cyclone is constructed of a translucent anti-static resin and features tapered ports to connect to most shop vacuum hoses. Note: The Dust Deputy is not for use with highly explosive dust, corrosive, or hot/smoldering materials.

  • Color: Clear
  • Brand: Oneida Air Systems
  • ASIN: B002GZLCHM
  • UPC: 864527000000

The Dust Deputy DIY Standalone Anti-Static Cyclone Separator

The Dust Deputy DIY Standalone Anti-Static Cyclone

Tired of using your shop vacuum and getting poor results? Oneida's Dust Deputy will transform your shop vacuum and the way you work by trapping dust in a barrel and NOT in your shop vacuum. Injection molded from a translucent anti-static resin, the patented design of Oneida Air's Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss while extending the life of your shop vacuum! The Oneida Dust Deputy DIY (Do-It-Yourself) cyclone let's you build the dust control system that works best for you. You supply the waste container, the hardware, the hose, etc. Then add the award-winning cyclone separator. With the DIY cyclone you're limited only by your imagination! The Dust Deputy will save you time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0" ports for secure fittings using a variety of hose sizes.

  • Color: Clear
  • Brand: Oneida Air Systems
  • ASIN: B002JP315K
  • UPC: 864527000017

Oneida Air Systems Super Dust Deputy Molded Cyclone Only

Oneida Air Systems Super Dust Deputy Molded Cyclone

Use your existing blower to turn your inefficient, single-stage bag collector into a high efficiency, two-stage cyclone system that separates 99% of wood waste before it reaches the filter, resulting in virtually no filter clogging or reduction in airflow. Other benefits of this lightweight, molded resin Super Dust Deputy cyclone include reduced maintenance and elimination of dusty bags to empty. Get the available drum kit (#154756), or get creative and use your own! Any size or shape will work, as long as it's airtight.

  • Color: Black
  • Brand: Oneida Air Systems
  • ASIN: B00BEXBWS6
  • UPC: 864527000031

Oneida Air Systems 4in Super Dust Deputy Deluxe

Oneida Air Systems 4in Super Dust Deputy

Finally, a turnkey kit from Oneida Air Systems made just for woodworkers with single-stage dust collectors! Single-stage dust collectors are great for small, hobbyist shops but they come with a cost ... fine dust quickly clogs the filter, reducing suction and leaving your tools as messy as ever! Worse still, there is nothing to protect your dust collector from damage should you accidentally suck up large wood chunks or fasteners. Oneida Air Systems' patented Super Dust Deputy cyclone separates over 99% of dust and debris from the incoming airstream, virtually eliminating filter clogging, suction loss, and significantly prolonging the lifespan of your filter media. The 4" Super Dust Deputy Deluxe Kit has a small 16" footprint and assembled height under 42", making it the perfect shop accessory for small shops like your garage or even low ceiling basement shops. Cyclone molded from an industrial, abrasion resistant HDPE resin. Static dissipative construction safely conveys static charge build-up to the electrical ground, preventing harmful discharges.Features: Retrofits to single-stage 1/2 HP to 3 HP dust collectors Ultra-high efficiency with integrated air ramp and 4" neutral-vane inlet Inlet Size: 4" OD (3.75" ID); Outlet Size: 4" OD (3.65" I.D.) Small 16" footprint and assemble...

  • Color: Black
  • Brand: Oneida Air Systems
  • ASIN: B06Y37FF9D
  • UPC: 852811006777

Jet JCDC-3 3 hp Cyclone Dust Collector Kit

Jet JCDC-3 3 hp Cyclone Dust Collector

Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET delivers the efficiency you've been waiting for. With a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop's capabilities to a new level. Upgrade to a JET Cyclone Dust Collector and experience The Power of Efficiency.

  • Brand: Jet
  • ASIN: B01683ZWUA
  • UPC: 731325428964

POWERTEC 70200 2-1/2" Three-Machine Dust Collection Kit

POWERTEC 70200 2-1/2" Three-Machine Dust Collection

The POWERTEC 70200 2-1/2-inch three-machine dust Collection kit, provides a convenient selection of choice components Ideal for connecting your dust Collector to three separate machines. You'll have everything you need to customize a high-quality; effective and efficient dust-extraction system, thus ensuring that dust and debris are extracted straight from your power tools and machinery directly into your dust Collector. Clean, healthier air and neat workshop surfaces are but a starter kit away. This handy and practical set includes two 45-degree elbow connectors, two y-fittings, three essential Blast Gates, and twenty 2-1/2-inch key hose clamps. The elbow connectors allow for smooth directional airflow around bends and corners, and are useful in hard-to-reach places. The y-connectors facilitate a dual hose branch connection from a single main hose line. The Blast Gates increase the efficiency of your dust Collection system by seamlessly directing the airflow from one machine to another. Finally, the hose clamps ensure airtight connections, critical for high-impact dust extraction. Quick and easy installation saves time and hassle, thus creating more time to get down to the satisfying work of creating superb woodwork. Make it perfect with the POWERTEC 70200 2-1/2-inch three-machi...

  • Brand: POWERTEC
  • ASIN: B01N6Q7G1Z
  • UPC: 709619856755

Oneida Air Systems AXD000009 Ultimate Dust Deputy Kit for Festool

Oneida Air Systems AXD000009 Ultimate Dust Deputy Kit

Combine an Oneida Dust Deputy cyclone with the quality and performance of a Festool CT Dust Extraction System to create the ultimate three stage vacuum system.Kit Includes: - Industrial Static Dissipative, 9 Gallon (34L) container - Dust Bagger, plastic bag hold-down system. No messy dumping - allows easy removal of dust in plastic bags. - Static dissipating cyclone separator - 6 feet of static dissipating hose with static dissipating cuffsIt can be use with any shop vacuum, but is designed to integrate perfectly with Festool Vacuums.Vacuum Not Included.Innovation In Dust Collection Its what Oneida does, its who we are. And now, enjoy the versatility of our new translucent plastic Dust Deputy! Injection molded from static dissipating plastic, you now have even more options of mounting it in your shop, and easier hose connections with the tapered inlet and outlet (2 inner diameters). Oneidas patented Dust Deputy will transform your vacuum. Attach the Dust Deputy and sand for hours. It captures 99% of the dust before it reaches your vacuum, resulting in virtually no filter clogging or loss of suction. You will extend the life of your vacuum and your filters, saving you money on replacements! US Patent Application Ser. No. 11/413,729 April 28, 2006 US Patent # US 7,282,074 B1 Octobe...

  • Color: Black
  • Brand: Oneida Air Systems
  • ASIN: B003VR65OE
  • UPC: 852811006753

DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid - Woodshop Dust Separator Lid for Woodworking Collector Tools

DCT Cyclone Wood Saw Dust Collection Garbage Trash

Improve your dust collector efficiency with the DCT Cyclone Wood Saw Dust Collection Garbage Trash Can Lid - Woodshop Dust Separator Lid for Woodworking Collector Tools. This lid is the easiest cyclone solution for your dust collection system to collect larger and heavier shavings and dust before they reach your impeller and collection bags. It accepts any 4-inch hose and fits standard 30-gallon metal trash cans. Place the included curved elbow fitting on the input intake side of the lid and your dust collector on the output side. This creates a vacuum inside the trash can when it is running (incorrect placement will not create a cyclone effect and dust will pass through). Dust collector and trash can required, not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: Deadwood Crafted Tools
  • ASIN: B0773GG6GR
  • UPC: 688295879312

AIFONE Cyclone Sn50t3 Generation Turbocharger DIY Powder Dust Collector Filter Flange Base Sink Rubble Trickle Sprinkle Strain Detritu Percolate Dot Disperse Separate 1PCs

AIFONE Cyclone Sn50t3 Generation Turbocharger DIY Powder Dust

description : cyclone sn50t3 generation turbocharged cyclone powder dust collector filter with flange basefeatures : generation turbocharged cyclones addition maintaining the advantages the generation outside added active connection has been adjueted ensure efficient dust removal convenient for customers install and use technical parameter 1 the air volume :174-280m³ m 2 wind pressure :2 0-22 kpa 3 wind :12-28 m s 4 efficiency :90-99%use : widely used: wood machinery textiles home improvement food grain coal cement building materials power metallurgy iron and steel chemicals cleaning cars dust removal equipment manufacturing and other industries package includes : 1 x generation turbocharged cyclone powder dust collector filter

  • Color: Black
  • Brand: AIFONE
  • ASIN: B07H73DNXP

4" Dust Separator Cyclone Kit for Barrels, Trash Cans, Buckets or Custom Built Containers, Large Debris Falls To The Bottom Of The Can While Dust Flows To The Dust Collector

4" Dust Separator Cyclone Kit for Barrels, Trash

Help protect your dust collector from unnecessary wear and tear with our unique Dust Separator DIY Kit. Two elbows and two couplers combine to give you in feed and out feed points when they are installed on a barrel, box, or any container (barrel or box not included) that you would like to capture large wood chips in. The separator works by simply allowing the heavy wood chips to fall to the bottom of the container, while the lighter dust particles get pulled in the out feed port and into your dust collector. This keeps the large debris from slamming into your dust collector's impeller, which in turn prevents any unnecessary damage to the unit. Separating the large wood chips also keeps your dust collector bag or container from filling up so fast, this means you won't have to empty it as often! The Dust Separator Kit is perfect for use with Jointers, Planers, Router Table units and more! Includes: 2 ea. 4" Ports 1 ea. 4" in feed elbow 1 ea. 4" out feed elbow 1 ea. hardware pack 2 ea. 4" turn key hose clamps

  • Brand: Peachtree Woodworking Supply
  • ASIN: B071CL5MJN

Oneida Air Systems Super Dust Deputy XL

Oneida Air Systems Super Dust Deputy

Turn your inefficient single-stage bag collector into a two-stage cyclone system using your existing blower. Get the available drum kit, or use your own - any size or shape as long as it's airtight. High efficiency cyclone separates 99% of wood waste before the filter, resulting in virtually no filter clogging or reduction in airflow. Reduced filter maintenance and no dusty bags to empty. This item is molded cyclone only. Drum kits are optional, or get creative and use your own!Features: Lightweight molded resin has low center of gravity Compact footprint with simple installation Retrofits on 3 HP - 5 HP single-stage dust collectors Inlet Size: 6-1/4" O.D. (6" I.D.), Outlet Size: 6-1/4" O.D. (6" I.D.) Approximately 38" height; includes assembly gasket and hardware

  • Brand: Oneida Air Systems
  • ASIN: B011DI6FE2
  • UPC: 852811006708

Jet JCDC-2 2 hp Cyclone Dust Collector

Jet JCDC-2 2 hp Cyclone Dust

Are you ready to get more from your dust collector? The Cyclone Dust Collector Collection from JET delivers the efficiency you've been waiting for. With a direct mount filter, a radio frequency remote control and a large collection bin these dust collectors take your shop's capabilities to a new level. Upgrade to a JET Cyclone Dust Collector and experience The Power of Efficiency.

  • Brand: Jet
  • ASIN: B01683ZVN8
  • UPC: 731325424225

Taytools 114971 4" Dust Collection Cyclone Separator Kit for Trash Cans, Barrels or Custom Built Containers

Taytools 114971 4" Dust Collection Cyclone Separator Kit

Improve your dust collector's efficiency by converting to a two-stage unit with this 4 inch cyclone chip separator kit. The kit includes two elbows, two couplings, two hose clamps and all hardware needed to convert any barrel, trash can, box or custom container into an effective chip separator. This cyclone separator collects larger and heavier debris before they can reach and damage the impeller or clog the filter. Collecting the large chips before they reach the filter reduces the frequency the filter or bag needs emptied. The dust separator kit is perfect for use with Table, Saws, Jointers, Planers, Router Tables and much more! Kit includes: 2 each 4" Ports, 1 each 4" infeed elbow, 1 each. 4" outfeed elbow, 2 each 4" hose clamps and 1 each hardware pack.

  • Brand: Taytools
  • ASIN: B074Y7F5QH
  • UPC: 700667471952

Oneida Molded Deluxe Dust Deputy Kit with 10-Gallon Steel Drum

Oneida Molded Deluxe Dust Deputy Kit with 10-Gallon

Injection molded from anti-static plastic, you now have even more options of mounting it in your shop with easier hose connections courtesy of the tapered inlet and outlet (2" inner diameters). Oneida's patented Dust Deputy® will transform your vacuum. Attach the Dust Deputy® and sand for hours. It captures 99% of the dust before it reaches your vacuum, resulting in virtually no filter clogging or loss of suction. You will extend the life of your vacuum and your filters, saving you money on replacements! This Kit Includes: 14" tall Dust Deputy® Cyclone - Injection molded from anti-static resin Black 10 Gallon Steel Drum with ring clamp (with locking lever) and lid (with pre-cut cyclone & bolt holes) Drum dolly frame with 4 free-rotating caster wheels Tapered 2" inlet and outlet ports on cyclone to accommodate a wide variety of hose diameters and sizes 5.5 ft of 2.5" Static Dissipative Flex Hose Static Conductive Copper Foil Tape (for additional grounding) Foam gasket and mounting hardware Item #: AXD000010

  • Brand: Oneida Air Systems
  • ASIN: B0186MCR2M
  • UPC: 852811006722

Dust Right Dust Separator

Dust Right Dust

When used with most power tools and shop vacuums, the Dust Right® Separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter. The five-caster base makes it exceptionally stable and easy to maneuver around the shop. Plus, hoses connect inside the in/out ports, preventing unintentional disconnections. Includes a 36'' flexform hose that connects the Dust Right® Separator to any vacuum with a standard 2-1/4'' ID inlet port. The Dust Right® Separator creates a cyclonic air flow that causes most wood dust particles and other materials that are heavier than air to separate, preventing them from being passed to the vacuum The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters 10-gallon translucent bucket is easy to empty and easy to tell when it's full Holds twice the capacity of competitors' products Not intended for fine airborne dust such as drywall dust Maximum performance can be expected when using the Dust Right® Separator in woodworking or general shop cleaning applications Shop vac not included

  • Brand: Dust Right
  • ASIN: B00AHGJC8S
  • UPC: 733175455565
Similar Cyclone Dust Collection Systems Results