Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10-60V Step Up to 12-90V 20A Input Power Supply Module Volt Transformer Circuit Board

Boost Voltage Converter, DROK 1500W Voltage Regulator Booster

DROK 1500W Boost Voltage Converter Parameters: Module type: non-isolated step-up module (BOOST) Input voltage range: DC 10V~60V Input current: 10~30V input voltage, maximum current 30A; 31~60V input voltage, maximum current 25A Static operating current: 15 mA (when 12V step up to 20V, the higher the output voltage, the current will increase) Output voltage: 12~90V continuously adjustable (default 19V) Output current: 20A MAX, more than 15A please enhance heat dissipation Constant current range: 0.8~20A (±0.3A) Temperature: -40~ + 85℃(if the ambient temperature is too high, please enhance heat dissipation) Operating frequency: 150 KHz Conversion efficiency: 92% ~ 97% Protection: input over-current protection, battery low voltage protection, input reverse polarity protection, short circuit protection Installation: 4 x 3 mm screw holes Module size(L*W*H): 130 x 52 x 85 mm Applications: 1. DIY a power supply, input 12V and output can be 12-90V adjustable. 2. Charge for your electromobile. 3. As the car power supply, charge for your laptop, PDA or a variety of digital products. 4. DIY a notebook mobile power supply: with 12V big-capacity lithium battery pack, get your notebook on anywhere. 5. Solar panel regulator. Package Including: 1 x Power Converter Module

  • Brand: DROK

5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board (5 Pack)

5 Pack Boost Converter Module XL6009 DC to

eBoot 5 Pack XL6009 DC to DC 3.0-30 V to 5-35 V output voltage adjustable step-up power converter module Good performance DSN6009 is a good-performance 400KHz 4A switch currency step-up boost module. This module XL6009E1 is coming with the 3rd generation high-frequency switch technology as the core chip, the performance is much higher than LM2577. With mounting holes There are two mounting holes on the diagonal side, the holes are 0.139 inches/ 3.53 mm, it is a good efficiency non-isolated boost module. Specifications DSN6009 booster module Nature of the module: unfenced step-up (Boost) Rectifying way: synchronous rectifier Input range: 3 V to 32 V Output range: 5 V to 35 V Input current 4 A (maximum), no-load 18 mA (5 V input, 8 V output, no-load less than 18 mA. The higher the voltage, the greater the no-load current) Conversion efficiency: < 94 % (the greater the pressure difference, the lower the efficiency) Switching frequency: 400 KHZ Output ripple: 50 mV (the higher the voltage, current, the ripple is larger) Load regulation: plus or minus 0.5% Voltage regulation: plus or minus 0.5% Working temperature: - 40 ℃ to + 85 ℃ Overall dimensions: 43 mm x 21 mm to 14 mm (length x width x height) Attention: do not plug this booster to your project before adjusting the poten...

  • Brand: eBoot
  • ASIN: B06XWSV89D
  • UPC: 712971918320

Step Down Voltage Regulator Board, DROK Numerical Control Buck Converter DC 6-40V 32V 24V to 0-38V 5V 9V 12V 8A NC Digital Adjustable Volt Transformer Stabilized Power Supply Module with LED Voltmeter

Step Down Voltage Regulator Board, DROK Numerical Control

Parameters: IN+: Input Positive IN-: Input Negative OUT+: Output Positive OUT-: Output Negative Input Voltage: 6-40V (please don't over 40V, or it may cause damage) Output Voltage: 0-38V Output Power: 200W(MAX) Output Current: 8A (over 4A, please enhance heatsink) (Output short circuit may cause damage on the module, please don't lead to short circuit) Output Voltage Resolution: 0.1V Voltage Measurement Accuracy:+/-1% Size: 60*66*36mm (non fan) Circuit Protection: Integrated input MOS reverse polarity protection circuit, it will not damaged if reversed. Note: Before wiring, please check carefully the characters on the terminals of the input and output wire, and wiring in strict accordance with the character labels. Before operating buttons, please check carefully the characters beside the buttons on the PCB module and make sure the functions of every button. Operation: 1. The ON/OFF button is the output voltage control button. After power-on, the default output is the state when it was last turned off. Pressing once can turn the output on or off. Press again to turn it on, and then cycle.2. The two buttons on the left side of the digital tube (IN button, OUT button) can switch the digital tube to display the current input voltage and output voltage.3. SET button ...

  • Brand: DROK
  • ASIN: B015YZZ1G8

DROK DC-DC Buck Voltage Converter 6.5-12V to 5V 2A Step-Down Volt Transformer Stabilizer Voltage Regulator Module with USB Output

DROK DC-DC Buck Voltage Converter 6.5-12V to 5V

Parameters: Input voltage/ voltmeter range: DC 4.5~12V (please input voltage 6.5 ~ 12V , then can get a 5.0V stabilize output) Output voltage/current: 5V/2A Instructions for use: After power-on, the voltmeter displays, if you need to charge such devices as phone, Tablet PC, MP3, press the "Output Enable" button,then the USB power indicator lights, USB output 5.0V; if you need to turn off the digital display, press the "low power" button, then enter low-power standby mode and USB output shutdown. Voltmeter calibration method: 1.when the voltage meter display, press "Output Enable" button 2 seconds then release, voltmeter flashes. 2.Touch the "Output Enable" button, the voltage increases one unit,touch the "Low Power" button, reduce one voltage reduction unit(one unit is less than 0.1V) 3.After the voltage adjustment is completed, please press the "Output Enable" button for 2 seconds then release, exit voltage calibration mode.If power off, parameter setting will automatically save. Applications: 1.Car / motorcycle battery voltage monitor or other voltage measurements 2.USB Charger for Mobile phone, MP3, Tablet PC or other electronic products Please Note: This module defaults to D+,D- shorted, compatible with most of cell phone charging, if you need to install identification resist...

  • Brand: DROK
  • UPC: 519397043380

LOETAD AC to DC Converter 10A 120W 110-220V to 12V Car Cigarette Lighter Socket AC/DC Power Supply Charging Adapter

LOETAD AC to DC Converter 10A 120W 110-220V

Brand: LOETADOutput Power: 120WOutput Voltage: 12V DC (Output Voltage Tolerance:±1%)Output Current: 10A(Output Current Range:0~10A)Input Voltage Range: 110V-240VInput Current: 1.3A MAXRange of Application: Converts 110V-240V AC household current to 12V DCOverload Protection: 105%-200% Off output automatic recoveryOutput DC plug: The car cigarette lighterWorking temperature: -10℃-50℃,20%-90%RHStore temperature: -20℃-85℃,10%-95%RHFunctionOver-current ProtectionMade of High quality material, multi-layer PCB and optimized shielding design provide the power supply a better circuit protection.Over-voltage ProtectionThrough the OVP circuit processing, it will prevent high input voltage  and damage to the back-end circuit.Over-charge ProtectionAutomatically disconnect when charging is complete.Damp protectionWaterproof, prevent leakage of electric.Short Circuit protectionShort circuit protection mechanism is provided to ensure that the adapter is not damaged when a short-circuit occurs .Electrical protectionComply with international FCC specifications to reduce the impact of electromagnetic interference.Safety Certification3C Certification, FCC Certification, CE Certification.

  • Color: AC to DC Converter
  • Brand: LOETAD
  • ASIN: B078S2BSS1
  • UPC: 768430612742

DROK 200167 Waterproof 180W DC-DC Synchronous Buck Converter Voltage Regulator 20-72V 24V/36V/48V/60V to 12V 15A Volt Step-down Power Supply Transformer

DROK 200167 Waterproof 180W DC-DC Synchronous Buck Converter

Description: Input Voltage: DC 60V(20V-72V) Output Voltage: DC 12V Output Current: 15A Output Power: 180W Operating Temperature: -40℃ ~ +85℃ industrial High Conversion Efficiency: more than 90% Dimension: 74mm*74mm*32mm(L*W*H) Installation Wire: 13-14cm Weight: 0.29KG Adopted potting process, Aluminum alloy shell, specially made to be waterproof, anti-shock, moistureproof and dust-proof. Protection: transient absorption high voltage protection, over-current protection, over-heat protection and output short circuit protection. Connection: Input: red(+) black(-) Output: yellow(+) black(-) Application: Motors, audio, monitor, LED car display, air conditioner, fans, solar energy, photovoltaic energy, DVD, LED lights, pumps, industrial equipment appliances, etc. Package Includes: 1 x DC Buck Converter

  • Brand: DROK
  • ASIN: B018X03GYA

DROK 091016 DC-DC Buck Converter 4-38V Step-down Voltage Regulator Module Adjustable Current 5A Max 75W High Power Volt Power Supply Transformer Board with Constant Current & Voltage

DROK 091016 DC-DC Buck Converter 4-38V Step-down Voltage

ParameterInput voltage: 4-38VOutput power: 75W(Max)Transfer efficiency: 96%(Max)Output current: adjustabel;5A(Max) Output voltage: 1.25-36V constantly adjustable Input reverse connection protection: NOShort-circuit protection: YES(limited current of 8A) Over-temperature protection: YES(item will stop output automatically) How to set current limits: 1. Adjust constant-voltage potentiometer to make output voltage reach the voltage value which you want. 2. Use 10A multimeter to measure short-circuit output current (directly connect two meters to output interface), at the same time, adjust constant-voltage potentiometer to make output current reach preset over-current protection value. (If the current value multimeter displays is 4A, the maximum current of the module only can be up to 4A; when the current reach 4A, constant-voltage constant-current red indicator light is on, or the light is off) LED indicator light: 1. Red light is on in constant current status and off in constant voltage status.2. Blue light is on when charging and off when full-charging3. Green light is on when full-charged.Package includes: 1 X Buck Converter

  • Brand: DROK

Boost Voltage Converter, Yeeco DC DC 12-90V to 12-130V 15A 900W Adjustable Step Up Voltage Transformer Power Supply Module Volt Transformer Circuit Board Regulator Controller Stabilizer CV CC

Boost Voltage Converter, Yeeco DC DC 12-90V to

Parameter: Input voltage: 12-90V Input current: 15A(MAX) Output voltage: 12-130V continuously adjustable Output current: 15A(MAX) Output power: 900W(Max) Output ripple:

  • Brand: Yeeco
  • ASIN: B07568P3QL

Adjustable DC Power Voltage Converter AC 110V-220V to DC 0-48V Module Switching Power Supply Digital Display 480W Voltage Regulator Transformer Built in Cooling Fan

Adjustable DC Power Voltage Converter AC 110V-220V to

Parameters: Input voltage: AC 110-220V ± 15% Output: DC 0-48V 10A Rated power: 480W Wiring: 〨: Ground N: Null wire L: Live wire V+: DC output + V-: DC output - Package includes: 1 x Switching Power Supply Instructions for use: The current is unregulated and max. is 10A. The actual current is decided by load. Any devices below 10A current can use this product. Any devices above 10A current cannot use this product. Note: Before using, please select the input voltage 110V/220V according to your local voltage, to avoid damaging, switch is at right side of the item. If use motor, fan and other inductive load, please pay attention to the load's maximum starting current parameter. This parameter shall not be higher than the power supply's max. current. Otherwise it may damage the power supply. Or allocate the soft starting protection circuit for the load to absorb the impact current.Notice:If you have any issues just feel free to contact us, we will help you to resolve, thanks for your cooperation.

  • Brand: MYSWEETY
  • ASIN: B0777MH681
  • UPC: 661273114438

12v to 24v DC Converter, DROK 100W DC-DC Boost Converter Module 6A Voltage Regulator Board 10V-32V to 15V-35V Adjustable Step-up Volt Power Supply

12v to 24v DC Converter, DROK 100W DC-DC

Parameters: Input Voltage: 10~32VDC Input Current: 15A(max.) Static Current: 15mA Output Voltage: 15~35VDC (Can be adjusted by the potentiometer on the side) Output Current: 6A max. (Please enhance cooling work when current is over 5A. The greater the voltage difference, the smaller the output current.) Output Power: 100W max, at natural heat dissipation state Wiring: terminals (IN is input while OUT is output)   Note: 1.This is a step-up voltage module, so the input voltage must be lower than output voltage. 2. Input terminal doesn't have polarity connection reverse protection. Please note the direction of positive and negative when wiring. 3. When the heat dissipation is not good in high ambient temperature and the use of power is relatively large, please strengthen the fan cooling.   Package Includes: 1x 12v to 24v DC Converter Module

  • Brand: DROK
  • ASIN: B075RQCW7G

Buck Boost Converter Display, DROK Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 3A 35W Power Supply Module

Buck Boost Converter Display, DROK Buck-Boost Board DC

Parameters: Input voltage range: DC 5.5-30V (when the input voltage is 5V, the boost and buck can be achieved, but the voltage and current measurement is inaccurate; under 4.7V, under voltage protection will be activated) Output voltage range: DC 0.5-30V Output current: can stably work at 3A for a long time, when enhance heat dissipation can reach 4A Output power: 35W (natural cooling), when enhance heat dissipation can reach 50W Voltage display resolution: 0.05V Current display resolution: 0.005A Conversion rate: about 88% Soft start: Yes, (a large power load module may fail when it is started) Input reverse connection protection: yes Output stop the current from feeding back protection: yes Short circuit protection: yes Working frequency: 180KHZ Size: 66 * 48 * 21mm Mounting hole: 4mm in diameter Package Including: 1x Buck Boost Converter Module

  • Brand: DROK
  • ASIN: B0789QVKKF

EPBOWPT DC 12V 24V to DC 5V 10A 50W Converter Regulator 5V 50W Power Supply Step Down Module Transformer

EPBOWPT DC 12V 24V to DC 5V 10A

Features: *over-voltage protection, over-current protection, overheat protection *Short-circuit protection and automatic recovery *Waterproof design *Convert unstable 12/24V DC power supply to stable 5V DC power output *High conversion efficiency: Over 90% *Widely used in automotive, electricity, surveillance systems, railway signals, instruments and meters, LED displays (LED strip, copper led strings), cable TV, etc Specifications: *Input voltage: 12/24V *Output voltage: 5V *Output Current: 10A *Output power: 50W *Conversion efficiency: 90% *Maximum working temperature: 80℃ *Size: 46X32X18mm Package includes: 1 X DC 12V 24V to 5V 10A Converter Step Down Regulator Please note: If the ambient temperature exceeds 45℃, please reduce the power output, Or enhance heat dissipation

  • Color: 12/24V to 5V 10A Converter
  • Brand: EPBOWPT
  • ASIN: B01M03288J

Gowoops 2PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage

Gowoops 2PCS 150W DC-DC 10-32V to 12-35V Step

Featrure:★ Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45 ℃Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V) Output Ripple: 2% (MAX) 20M-bandwidth Operating Temperature: Industrial (-40℃ to +85℃) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation) Full load temperature rise: 45℃ No-load current: 25mA typical Voltage regulation: ± 0.5% Dynamic response speed: 5% 200uS Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (please comply with a reverse protection or connect a diode at input parts)Specifiction: Input voltage: DC 10V-32VOutput voltage: DC12V-35V(adjustable)Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A) Output Current: 10A (MAX) Output power: natural cooling 100W (MAX),  strengthening cooling 150W (MAX) real powerModule Properties: non-isolated step-up module (BOOST) Size: 65mm x 35mm x 21mmPackage Includes: 2 x 150W Boost Converter

  • Color: Step-up Voltage Converter Module
  • Brand: Gowoops
  • ASIN: B00J1X4XXM
  • UPC: 700686900105

[8-PACK] LM2596 DC-DC Adjustable Buck Converter 3-40 V to 1.5-35v Step Down Power Supply High Efficiency Voltage Regulator Module ...

[8-PACK] LM2596 DC-DC Adjustable Buck Converter 3-40 V

Product Features Parameters: Input Voltage: DC 3 -40 V Output Voltage: DC 1.5 - 35 V Output Current: 3A(MAX) It is recommended to use under 2A (NOTE: When using high power, add a heat sink to the power supply chip) Load adjust ratio: +/-0.5%  Voltage adjust ratio: +/-2.5%  Transferring efficiency: 92% Max(the higher output voltage, the higher efficiency)  ON/OFF frequency: 150KHz  Output ripple: 200mV  Module feature: buck and non-isolated  Rectification method: non-synchronous rectification  Size: 5.4x2.3x1.8CM  Weight: 16g  Fuction: 1.Built in over-temperature protection function  2.Built in current limit function  3.Built in output short-circuit protection function  How to use 1.Access the power supply ( 3 -40 V), the power indicator light, the module is working properly. 2.Adjust the blue potentiometer knob (usually clockwise rotation boost, counterclockwise rotation Step-down) and monitor the output voltage with a multimeter to reach the required voltage.  3.A customer reflects the module output voltage can not be adjusted, always equal to the input voltage. When you encounter this problem, please first counterclockwise rotation potentiometer 10 laps above, and then use the module can be normal adjustment of the voltage. Package includes:  8X LM2596 board 8 pie...

  • Color: [8-PACK] LM2596 Buck
  • Brand: D-PLANET
  • ASIN: B07C2QF1T1
  • UPC: 788410153003

eBoot 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module (10 Pack)

eBoot 10 Pack LM2596 DC to DC Buck

10 Pack lm2596 dc to dc buck converter 3.0-40v to 1.5-35v power supply step down module Features: Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost) Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A Instructions: Connect it to an electrical power source (3 - 40 v). The input and output interface can not be reversed. Adjust the swirl button on the blue potentiometer (normally clockwise rotation goes up the voltage and counterclockwise rotation makes the voltage decline). Monitor the output voltage with multimeter to get the needed voltage. Notes: Keep it under 2.5 A and use the heat sink when working for long hours.

  • Brand: eBoot
  • ASIN: B07RT95J4Q
  • UPC: 655160985645
Similar Dc Voltage Converter Circuit Results