Victron BatteryProtect 12/24V-100A

Victron BatteryProtect

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 12/24V auto ranging The BatteryProtect automatically detects system voltage Programming made easy The BatteryProtect can be set to engage/disengage at several different voltages. The seven segment display will indicate which setting has been chosen. A special setting for Li-ion batteries In this mode the Battery Protect can be controlled by the VE.Bus BMS. Note: the Battery Protect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V. Ignition proof No relays but MOSFET switches, and therefore no sparks. Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting...

  • Brand: Victron
  • ASIN: B01KIF2BGW

Blue Sea Systems m-LVD Low Voltage Disconnect

Blue Sea Systems m-LVD Low Voltage

65 Amp continuous rating 12V DC voltage input Status light in both m-LVD and Remote Control Switch provides visual warning of low voltage state prior to disconnect.

  • Color: blue/sea
  • Brand: Blue Sea Systems
  • ASIN: B00GZOP53M
  • UPC: 632085076351

Galley Power LLC Low Voltage Battery Disconnect, 20A, 12V/24V Auto Detect

Galley Power LLC Low Voltage Battery Disconnect, 20A,

NEW wire color scheme with the same functions as our popular GPC-1005-RBlue wire-> Load+Black wire-> GNDRed wire-> Batt+The GPC-1005B-R is a low voltage disconnect load switch. It prevents battery from over-discharge by disconnecting the attached load if the battery voltage drops below a predefined threshold. It reconnects the load when the battery is recharged. For install instructions and other details, please go to http://www.galleypower.com/store/p9/Low_voltage_disconnect.html Ten threshold options set by rotary selector For 12V battery: 2, 9.3V; 3, 9.7V; 4, 10.1V; 5, 10.5V; 6, 10.9V; 7, 11.3V; 8, 11.7V; 9, 12.1V For 24V battery: 2, 18.6V; 3, 19.4V; 4, 20.2V; 5, 21.0V; 6, 21.8V; 7, 22.6V; 8, 23.4V; 9, 24.2V When switch is at 0, OFF: Disconnect power from the load. (When rotated to location 2~9, the switch will stay off until reconnect threshold is reached.) When switch is at 1, ON: Connect power to the load if there is no pending fault. (When rotated to location 2~9, the switch will stay on until cutoff threshold is reached.) Recessed rotary switch for better setting protection. See GPC-1005B-F for flushed rotary switch option with easy access. Features Ultra low pass-through impedance 4.5mΩ Ultra low standby current 0.26mA in 12V mode and 0.65mA in 24...

  • Brand: Galley Power LLC
  • ASIN: B0147DYUN8

BUNKER INDUST 50A 6-10 Gauge Battery Quick Connect Disconnect Wire Harness Plug Kit 4 Pcs Battery Cable Quick Connect Disconnect Plug for Winch Auto Car Trailer Driver Electrical Devices,Red

BUNKER INDUST 50A 6-10 Gauge Battery Quick Connect

✌Specifications ①Color: Red ②Material: PC fire-retardant materials+stainless steel ③Current Rating: 50A ④Gauge: 6-10 A.W.G ⑤Rated Voltage: UL rated at 600 volts DC or AC ⑥Contacts material: copper silver ⑦Fire rating: 94-V0 ⑧Connector Dimension: 1 7/8"" long x 1 3/8"" wide x 1/2"" thick ⑨Terminal Pins Diameter: 0.22" ⑩Medium Withstanding Voltage: 2200DC ⑪Connect/disconnect Cycles: 10,000 times ⑫Operating Temperature Range:-4°F-221°F / -20°C-105°C ⑬Suitable For: UPS battery power connector✌How to Install ♥Insert the wires into the terminal pins, then solder or crimp them. ♥Insert the terminal pins into the connector housing and lock them in place ♥Operating Temperature Range: -4°F-221°F / -20°C-105°C ♥Connector Dimension: as the picture show ♥ Vibration Resistance: Excellent ♥Impact Resistance: High✌Package includes ●4x Connectors ●8x Terminal pins ●4x Rubber boot caps

  • Color: Red Battery Quick Connect
  • Brand: BUNKER INDUST
  • ASIN: B07CSKB9C3
  • UPC: 758574193665

ICStation Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module for 12-34V Lead Acid Lithium Battery (Pack of 2)

ICStation Digital Low Voltage Protector Disconnect Switch Over

ICStation digital battery overdischarge protection switch is specially designed for 12-36V lithium and lead acid battery. This is a low voltage protection module, not included batteries itself. On-board momentary push button to set the low voltage disconnect parameter, when the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. Specifications:Input Voltage Range: DC12V-36V Control Accuracy: 0.1V Compatible Battery: lead acid, lithium ion battery, solar panel batteryBoard Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H)Package Included:2 packs X Lead Acid Lipo Battery Charge Controller; pack of 2 is more cost-effective. Operation Instructions:+: short press display the low voltage protection parameter, long press to change the protection parameter -: short press to display the difference value, long prss to change this parameter. e.g. battery voltage lower than 11V will stop ouput and higher than 11.6V start output.long press "+" and set it as 11, then long press "-" and set it as 0.6V.-----------------------------❤❤ Warm Prompt ❤❤-----------------------------1, We provide the using guidance by email, and replace service for free in case you received a defecti...

  • Color: Blue
  • Brand: IS
  • ASIN: B07R8C9JW9

CZH-LABS Electronics-Salon Low Voltage Disconnect Module LVD, 12V 30A, Protect/Prolong Battery Life.

CZH-LABS Electronics-Salon Low Voltage Disconnect Module LVD, 12V

The item no paper instructions, please download the PDF file, and before buying please read the file: https://images-na.ssl-images-amazon.com/images/I/81mTLi3gbZL.pdf Part number: MD-D1021/12V, Version 2.0 (from June-26, 2018 change to Version 2.0, Version 1.0 we used a relay as a ON/OFF switch, version 2.0 changed to Ultra low impedance MOSFETs). Mount type: panel mount. Suitable battery: 12V. Rated current: 30A. To protect electronics from damaging low voltages and prevent a deep discharge of a battery during an extended power outage, the LVD module will automatically disconnect the battery when the voltage falls below the user adjustable cutoff voltage. When power is restored the Smart Switch will automatically reconnect the battery. thereby protecting the battery from total discharge (helping to prolong the life of the battery). Applications include: Solar systems, Alarm systems, UPS systems, Mobile systems, Or any application where you need to protect the battery from total discharge. Features: Programmable voltage setting for Disconnect and Reconnect. Red-green LED indication for relay switch ON and OFF. Panel mount or DIN rail mount types selectable. DIN rail mount version can support width 35 / 32 / 15mm rails.  

  • Brand: CZH-LABS
  • ASIN: B018TK5WIM

The Battery

The

  • ASIN: B00D6BQ068

Digital Low Voltage Disconnect Circuit Switch, Battery Protection, Programmable from 12 to 36v Battery or Battery Pack, 20a max Current

Digital Low Voltage Disconnect Circuit Switch, Battery Protection,

This low voltage disconnect circuit is very simple yet effective. The input voltage can be from 12-36 volts, and it's max current is 20 amps. To set this unit up hold the left button down for 3 seconds, and change the voltage setting to what you want the unit to disconnect the battery from the load at by pressing the left or right buttons. For example I set mine to disconnect my 18v battery at 16 volts. Next you hold down the right button for 3 seconds, and use the two buttons to set the reconnect voltage. For example if I set this setting at 2 volts when the batteries voltage goes above 18 volts it will allow power to flow to the load again. Disclaimer this unit does't come setup, you need to set it up yourself, if you dont you could over discharge your battery ruining it.

  • Brand: American Nigel
  • ASIN: B07PY4ZZ9V

Icstation Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module for 12-34V Lead Acid Lithium Battery

Icstation Digital Low Voltage Protector Disconnect Switch Over

Icstation digital battery overdischarge protection switch is specially designed for 12-36V lithium and lead acid battery. This is a low voltage protection module, not included batteries itself. On-board momentary push button to set the low voltage disconnect parameter, when the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. Specifications: Input Voltage Range: DC12-36V Control Accuracy: 0.1V Compatible Battery: lead acid, lithium ion battery, solar panel batteryBoard Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H)Package Included:1X Lead Acid Lipo Battery Charge ControllerOperation Instructions:+: short press display the low voltage protection parameter, long press to change the protection parameter -: short press to display the difference value, long prss to change this parameter. e.g. battery voltage lower than 11V will stop ouput and higher than 11.6V start output.long press "+" and set it as 11, then long press "-" and set it as 0.6V.-----------------------------❤❤ Warm Prompt ❤❤-----------------------------1, We provide the using guidance by email, and replace service for free in case you received a defective one, please rest assured to buy it.2, Di...

  • Color: Blue
  • Brand: IS
  • ASIN: B07929Y5SZ

Treva 10-Inch Portable Desktop Air Circulation Battery Fan - 2 Cooling Speeds - With AC Adapter

Treva 10-Inch Portable Desktop Air Circulation Battery Fan

Perfect for indoor or outdoor activities, O2COOL's 10-inch Battery-Operated Portable Fan can be used in the office, at school, on a picnic and especially during a power outage. It operates on six D-cell batteries (not included) or can be plugged in with its AC adapter, features high and low speeds, and boasts a patented fan blade design that extends the battery life while maximizing airflow. Cool by Design, this portable fan is also easy to carry with its built-in handle so you can take the cool with you.

  • Color: Fan
  • Brand: O2COOL
  • ASIN: B00ATSHMIQ
  • UPC: 804892191040
Similar Disconnect Low Battery Results