Raven R1510 4 inch PVC Termination Vent with Stainless Steel Screen, 4"

Raven R1510 4 inch PVC Termination Vent with

Raven termination vent was patented and designed with unique slot drain line opening on the side of the vent that allows water condensation to drain from the pipe through the PVC vent cap when faced downward. The mesh vent cap are fitted inside the hub Adapter fitting (not included) that is fitted over the PVC pipe end of opening. The stainless steel type 304 mesh screen provides the strength and durability to resist obstruction by preventing leaves, debris, wildlife from entering the pipe. The mesh screen vent cap unique design provides maximum airflow that allows the vent to discharge output effectively. Useful for residential or commercial applications. Please note that fitting hub is not included and must be purchased separately. Available in 2, 3, 4 and 6 inches.

  • Color: White
  • Brand: Raven
  • ASIN: B01BW36MWI
  • UPC: 804595109892

Oatey 39017 SURE-VENT AIR ADM VALVE, 1-1/2-Inch by 2-Inch, White

Oatey 39017 SURE-VENT AIR ADM VALVE, 1-1/2-Inch by

"Oatey Sure-Vent 160 DFU Capacity Air Admittance Valve's one-way valve is designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system.The purpose of an Air Admittance Valve is to provide a method of allowing air to enter the plumbing drainage system without the use of a vent extended to open air and to prevent sewer gases from escaping into a building. An Air Admittance Valve is a one way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system. The device shall close by gravity and seal the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures."

  • Color: White
  • Brand: Oatey
  • ASIN: B0069KCZO4
  • UPC: 732454231210

Charlotte Pipe 4" DWV Cap PVC DWV (Drain, Waste and Vent) Schedule 40 (Single Unit)

Charlotte Pipe 4" DWV Cap PVC DWV (Drain,

PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA

  • Color: White
  • Brand: Charlotte Pipe
  • ASIN: B00OH4P4PQ
  • UPC: 611942033041

Oatey 39225 1.5" 6 DFU Sure-Vent AAV 1-1/2" Tubular adapter (white) one-way valve

Oatey 39225 1.5" 6 DFU Sure-Vent AAV 1-1/2"

Oatey? Sure-Vent? 6 DFU Capacity Air Admittance Valve is a one-way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system.The purpose of an Air Admittance Valve is to provide a method of allowing air to enter the plumbing drainage system without the use of a vent extended to open air and to prevent sewer gases from escaping into a building. An Air Admittance Valve is a one way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system. The device shall close by gravity and seal the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures.

  • Color: White
  • Brand: Oatey
  • ASIN: B0069KDHSC
  • UPC: 038753392257

LASCO 05-2099 ABS Plastic Plumbing Vent with 1 1/2-Inch Male Pipe Thread

LASCO 05-2099 ABS Plastic Plumbing Vent with 1

LASCO 05-2099 Plumbing Vent, 1 1/2-Inch Male Pipe Thread, ABS Plastic. Mechanical vent installs on the drain line and vents the line without allowing sewer gas to enter the home . For venting sinks, tubs, Showers, washing machines, etc.. Plastic ABS construction. Eliminates the need for secondary stacks . 1 1/2-Inch male pipe threads. Eliminates the need for secondary stacks .

  • Brand: LASCO
  • ASIN: B00HYWB31C
  • UPC: 052151247254

1-1/2" PVC Vent Cap Cover with Screen SVC-RS15

1-1/2" PVC Vent Cap Cover with Screen

This PVC vent cap is designed to fit over a standard 1-1/2" PVC pipe (1.900" outside diameter). With a durable 316 stainless steel screen, with .218" x .218" openings, a 76% open area is maintained. Applications where this vent cap may be used include sump pumps, pools, lavatories, pools and anywhere else 1-1/2" PVC vent pipes need to be covered and protected from animals and debris. The patent pending SVC-RS15 vent cap may be installed with a snug slip fit, cement weld or with the included fasteners. A hex wrench is included with each SVC-RS15 purchase.

  • Brand: PVC Vent Screens
  • ASIN: B01KYPL2NO
  • UPC: 680474203161

Varmint Guard Fan Pipe Cap with Screen - Fits 4" Pipe

Varmint Guard Fan Pipe Cap with Screen -

Varmint Guard Fan Pipe Cap with Screen - Fits 4" Pipe Alllows radon gas to escape, but keeps pests and debris out. Fits standard Schedule 40 4" PVC. Instructions: 1). Use smooth clean cut or factory end of pipe where guard will be installed 2). Place the stainless steel mesh on the end of the pipe 3). Fit the molded plastic part on the end of the pipe and over the mesh 4). Install the two stainless steel screws

  • ASIN: B008MFNL1A

Oatey 43569 Bathroom Sink And Tub Drain Strainers, 4-Inch, White

Oatey 43569 Bathroom Sink And Tub Drain Strainers,

4 inch PVC snap in drain. The product is manufactured in china. Easy installation and easy handling. The product is highly durable.

  • Color: White
  • Brand: Oatey
  • ASIN: B000BQYBH6
  • UPC: 038753435695

Nylon Lint Trap for Washing Machine Drain Systems & Discharge Hoses (2 pack) - Fits all washing machines

Nylon Lint Trap for Washing Machine Drain Systems

Prevent lint build up in your washing machine drain system and discharge hoses with the Nylon Lint Trap from PlumbCraft -- the tight weave of the nylon catches lint before it goes into the drain. The trap features a strong elastic form fitting grip to fit most washing machine drain hoses. Trust PlumbCraft with all of your toilet care and repair needs -- the brand that plumbers have trusted for more than 50 years.

  • Color: Original Version
  • Brand: PlumbCraft
  • ASIN: B0028WZTC2
  • UPC: 028905763950

Oatey 39012 ABS In-Line Vent 2X2 13/16

Oatey 39012 ABS In-Line Vent 2X2

Oatey? In-Line Vent replaces secondary plumbing vents that protect the traps in kitchens and bathrooms. The In-Line Vent replaces any secondary plumbing vent protecting the traps of kitchen. It breaks the siphoning action caused by draining water. Prevents sewer gas from escaping from the drain sinks, bathroom basins, tub, shower, and washing machines into the home.

  • Color: Black
  • Brand: Oatey
  • ASIN: B000KKSP52
  • UPC: 732233476108
Similar Drain Vent Pipe Results