Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 2" Length, #10-16 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Flat

Sheet metal screws have a pointed end and widely spaced threads. They're self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and dama...

  • Brand: Small Parts
  • ASIN: B000NHS9A8

Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree Flat Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 1" Length (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, 82 Degree

The steel self-drilling screw with zinc plating has an 82-degree flat head and a star drive. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface. The star drive, also called a Torx drive, has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive. A star drive requires use of a Torx driver for installation and removal.Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

  • Color: zinc
  • Brand: Small Parts
  • ASIN: B00GYKN10G

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head, Star Drive, #3 Drill Point, #10-16 Thread Size, 3/4" Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Wafer Head,

The steel self-drilling screw with zinc plating has a wafer head and a star drive. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface that helps create a flush fit. The star drive, also called a Torx drive, has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive. A star drive requires use of a Torx driver for installation and removal.Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

  • Color: zinc
  • Brand: Small Parts
  • ASIN: B00GYLD6FK

Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex Washer Head, Hex Drive, #2 Drill Point, 1/4"-20 Thread Size, 1-1/2" Length (Pack of 50)

Steel Self-Drilling Screw, Zinc Plated Finish, Serrated Hex

The steel self-drilling screw with zinc plating has a serrated hex washer head and a hex drive. Steel is often used in applications where strength is the primary consideration. The zinc plating offers corrosion resistance and has a reflective appearance. The hex washer head has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the head for a screwdriver. The serrated flange acts like a washer to increase the fastener's bearing surface and distribute the clamping force over a larger area, providing a grip that resists loosening.Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

  • Color: zinc
  • Brand: Small Parts
  • ASIN: B00GYJ6U82

Home (2009)

Home

  • ASIN: B06XC1LPLB

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3" Length, #10-16 Threads (Pack of 100)

Steel Self-Drilling Screw, Zinc Plated Finish, Flat Head,

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

  • Color: zinc
  • Brand: Small Parts
  • ASIN: B000MS48W6

Stainless Steel Sheet Metal Screw, Plain Finish, Flat Head, Phillips Drive, Self-Drilling Point, 3/4" Length, #8-18 Threads (Pack of 100)

Stainless Steel Sheet Metal Screw, Plain Finish, Flat

Sheet metal screws have a pointed end and widely spaced threads. They're self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and dama...

  • Brand: Small Parts
  • ASIN: B000NHTNSU

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan Head, Square Drive, #2 Drill Point, #6-20 Thread Size, 1/2" Length (Pack of 50)

18-8 Stainless Steel Self-Drilling Screw, Plain Finish, Pan

The 18-8 stainless steel self-drilling screw with plain finish has a pan head and a square drive. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic. The pan head has a flat top and short vertical sides with a rounded top edge. The square drive resists slippage better than a Phillips or slotted drive.Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

  • Brand: Small Parts
  • ASIN: B00GYKEVA0

Drilling Holing Machine Pearl Drilling Machines Beads Driller Machine DIY Drill Jewelry Beads Driller Making Tool(US Plug)

Drilling Holing Machine Pearl Drilling Machines Beads Driller

Description: The bead drilling machine is small in size, light in weight and beautiful in appearance. It is suitable for any place. Can be used for accurate holing on such precious stone as  pearl, beeswax, wood beads etc. Specification: Material: Metal Weight: Approx.1330g/46.9oz Size: 21*6*5.5cm/8.3*2.4*2.2inch Motor power: 50W Speed: 0-12000 rpm Suitable Bead Size: 10-25mm Voltage: 110-240V Plug Type: US Plug Package List: 1 * Drilling Machine 1 * Power Cable 1 * Power Adapter 3 * Drill Bits (1mm, 1.5mm, 2mm) 1 * Drill Chuck Key Note: 1. Please allow slight error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Please kindly make a note if you need any plug adapter.

  • Color: US Plug
  • Brand: ZJchao
  • ASIN: B07HRMCNH9

EZ-AC Air-Conditioner Support Bracket (No Drilling Required, Made In U.S.A)

EZ-AC Air-Conditioner Support Bracket (No Drilling Required, Made

Features: Eliminates the risk of dropping the A/C out of the window during installation. Eliminates the need for any drilling - Stainless Steel Hardware Fasteners - Weather Resistant Powder-Coated Finish - Prevents damage to the home and the woodwork - Makes A/C installation fast, safe and easy year after year - Rugged, Solid-Steel Construction -100% Made in the U.S.A - New York Law compliant - **One-time assembly required ** - Fits windows with a minimum width opening of 23" and a maximum width opening of 38". Many homes and windows have custom construction and the EZ-AC is compatible with most homes. However if for some reason the EZ-AC does not work for your application, we will issue a full refund - No questions asked, once the unit is returned to our facility. This unit is NOT designed to work with windows that open from side to side, nor is it designed to work with homes with other than 2x4 or 2x6 construction. This unit will NOT work with the Frigidaire Gallery series air-conditioners. It WILL work with brick or concrete homes. If you have a stone ledge or any obstruction on the exterior of your home which may get in the way of the supporting leg, we recommend that you do NOT purchase this product. The EZ-AC is best used with standard or double-hung windows of any material...

  • Color: White
  • Brand: EZ-AC
  • ASIN: B01D8NAZTQ
  • UPC: 861195000226
Similar Drilling Finish Results