TB 189 RACE CAM

TB 189 RACE

High performance race camshaft with NTN bearings. Excellent quality and fast! For STOCK or RACE Head. Specs: .235" intake valve lift 196 degrees of duration @ 050", .218" exhaust valve lift and 208 degrees of duration @ .050"

  • Brand: TB
  • ASIN: B003GVQ82O

TB 28T 2 bolt cam sprocket for XR50 CRF50 PitBikes with Race Cam

TB 28T 2 bolt cam sprocket for XR50

TB 28T 2 bolt cam sprocket Fit Stock CRF50 & XR50 Honda For Honda style Pit bike horizontal motors Allows for use TB race heads on 86-107cc Chinese motors and CT70 Z50 builds (NOT for Honda XR100 or CRF100)

  • Brand: TB
  • ASIN: B003GVKE0G

TB 577 cam for V2 race heads s35 type

TB 577 cam for V2 race heads s35

V2 – 2 Race Camshaft, V2 Race Head (new version – best for 150cc and over)

  • Brand: TB
  • ASIN: B003GVO1MS

TB 32T 2 bolt cam sprocket

TB 32T 2 bolt cam

TB 32T 2 bolt cam sprocketAllows for use of Honda type 73mm long cams in Chinese motors

  • Brand: TB
  • ASIN: B003GVIFTS

TB Race Cam, 88cc Bore & 20mm Carb Kit

TB Race Cam, 88cc Bore & 20mm Carb

Race Cam, 88cc Big Bore kit, and 20mm Carburetor Performance Kit: - Lightweight aluminum cylinder with steel sleeve - Cast in mounts on cylinder for aftermarket skid plates - Oversized cooling fins on cylinder for efficient heat dissipation - tbwo365 52mm piston with rings, pin, & clips - Head gasket kit - High performance race camshaft (11/4/04 - Updated camshaft - more aggressive lift and duration without sacrificing low end torque) - 20mm Performance carb assembly. Includes: 20mm carb, intake, heatstop, gaskets, mounting hardware/wrench, air filter (not shown in pic) and long throttle cable (11/4/04 - Updated throttle cable - a new type is provided that allows for more adjustment and will work on wider selection of throttles) We recommend purchasing a high volume oil pump kit (available in this section). Installation Note: It will save a lot of time and effort if the oil pump is installed while installing the bore kit (requires cylinder removal). Kit works with XR70 -CRF70China 50-70

  • Brand: TB
  • ASIN: B003GVO86M

TB Race Cam, 88cc Bore & 20mm Carb Kit

TB Race Cam, 88cc Bore & 20mm Carb

Race Cam, 88cc Big Bore kit, and 20mm Carburetor Performance Kit: - Lightweight aluminum cylinder with steel sleeve - Cast in mounts on cylinder for aftermarket skid plates - Oversized cooling fins on cylinder for efficient heat dissipation - tbwo190 52mm piston with rings, pin, & clips - Head gasket kit - Main jet kt - High performance race camshaft (11/4/04 - Updated camshaft - more aggressive lift and duration without sacrificing low end torque) - 20mm Performance carb assembly. Includes: 20mm carb, intake, heatstop, gaskets, mounting hardware/wrench, air filter (not shown in pic) and long throttle cable (11/4/04 - Updated throttle cable - a new type is provided that allows for more adjustment and will work on wider selection of throttles) We recommend purchasing a high volume oil pump kit (available in this section). Installation Note: It will save a lot of time and effort if the oil pump is installed while installing the bore kit (requires cylinder removal). Kit works only with 88-08 XR50 -CRF50

  • Brand: TB
  • ASIN: B003GVKCV2

Hot Cams 2027-1 Camshaft

Hot Cams 2027-1

Hot Cams 2027-1 Camshaft

  • Brand: Hot Cams
  • ASIN: B003Y7YK7K
  • UPC: 639853701774

TB 448 Race Cam

TB 448 Race

Long China type Race cam Improved power thru entire range Lobe Lift - .257" Duration @ .050" - 236 deg. 3 Bolt type 448 is 74MM Long 34MM Front BEARING Rear bearing are easily interchangeable with your stock cam

  • Brand: TB
  • ASIN: B003GVI7GE

TB KLX110 YX Race Cam

TB KLX110 YX Race

YX Race Camshaft Fits TB V1 Race Head Race camshaft for our regular Race Head (Not V2 head) This is the YX cam that has more lift/duration than TB stock head cam and works great with TB V1 Race Head. Can be used for other heads but they may need to be modified due to very high lift lobes on this cam New Take Off Cam

  • Brand: TB
  • ASIN: B003GVQDQA

TB 300 Race Head Cam

TB 300 Race Head

TB 300 RACE HEAD CAM This camshaft is for the Race Head only (Not for stock head) - Similar to TBW0189 but more aggressive lift and duration without sacrificing low end torque. Uses NTN bearings Specs: .275" intake valve lift and 230 degrees of duration @ .050", 275" exhaust valve lift and 230 degrees of duration @ .050" This is the same cam we use in our T-5 WORKS engines!! Honda 50 type Cam Legnth 70mm Front Bearing 42MM OD 2 Bolt type Rear bearing are easily interchangeable with your stock cam

  • Brand: TB
  • ASIN: B003GVO9PM

TB 411 Race Cam

TB 411 Race

Race Camshaft with great all around peformance througout the RPM range yet not so agressive that you have to replace your stock valve springs to run it. Similar to others on the market but without the high price and no core exchange (this is not a used re-ground cam). (fits most 124cc engines with a 52.4x57mm bore and stroke and most 2 valve 86cc through 107cc engines with E22 heads or similar) Common models are Pitster,GPX, Xtreme, Thumpstar and most Jailing engines. Size: 35mm large bearing, 32mm small bearing, Approx 68.30mm center to center Front Bearing 35MM OD 3 Bolt type Rear bearing are easily interchangeable with your stock cam

  • Brand: TB
  • ASIN: B003GVO8HQ

TB 114cc Kit w Race cam (TRX90)

TB 114cc Kit w Race cam

TB 114cc High Compression Bore Kit - with Race cam FOR : TRX90 - Lightweight aluminum cylinder with steel sleeve (huge weight savings over your stock cast iron cylinder) - Cast in mounts on cylinder for aftermarket skid plates - Oversized cooling fins on cylinder for efficient heat dissipation - High compression 54mm piston with rings, pin, & clips (replaces your low compression dished or flat top piston) - Head gasket kit - Race cam fits all TRX90 head This will make a huge difference in performance over your stock setup and is a very quick and easy upgrade. For additional performance, add the 22 mm carb kit available in this section (works great with this setup). BOLTS RIGHT INTO YOUR TRX90 WITH NO MODS

  • Brand: TB
  • ASIN: B003GVO56K

TB 114cc Kit w Race cam

TB 114cc Kit w Race

TB 114cc High Compression Bore Kit - 86cc - 107cc Engines FOR : LIFAN 86-107 SIKK MX 110 XTREME 107 ICON - Lightweight aluminum cylinder with steel sleeve (huge weight savings over your stock cast iron cylinder) - Cast in mounts on cylinder for aftermarket skid plates - Oversized cooling fins on cylinder for efficient heat dissipation - High compression 54mm piston with rings, pin, & clips (replaces your low compression dished or flat top piston) - Head gasket kit - Race cam fits all E22 heads This will make a huge difference in performance over your stock setup and is a very quick and easy upgrade. For additional performance, add the 24mm or 26mm carb kit available in this section (both work great with this setup). This kit will work on all 86cc through 107 Chinese engines Except models with a 3 valve head.the cylinder stud spacing is different on SDG 107 (SDG SPEED MINI 107) Our Race Heads will work with your 2 valve head and will come with our huge Race Cam. Additionally, our Race Head uses Honda type cams so there are many cam options available for your particular type of riding, unlike the limited selection of cams available for the Chinese heads. Installation Note: It will save a lot of time and effort if the oil pump is installed while installing the bore kit (...

  • Brand: TB
  • ASIN: B003GVMKEO

TB 473 cam for V2 race heads s25 type

TB 473 cam for V2 race heads s25

Original Race Camshaft for V2 Race Head

  • Brand: TB
  • ASIN: B003GVMIFA

TB Race Cam for Big Valve Heads

TB Race Cam for Big Valve

THIS CAM IS SUPPLIED WITH SPECIAL 32t SPROCKET FOR USE WITH ALL LIFAN BIG VALVE HEADS and ENGINES SDG PRO MINI 125 and more Specs: .275" intake valve lift and 230 degrees of duration @ .050", 275" exhaust valve lift and 230 degrees of duration @ .050"This is the same cam we use in our T-5 WORKS engines!!

  • Brand: TB
  • ASIN: B003GVIF5M
Similar Drz110 Cam Results