DEWALT DWV012 10-Gallon Dust Extractor with Automatic Filter
The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit
The Dust Deputy Deluxe Anti-Static Cyclone Separator 5
Tired of using your shop vacuum and getting poor results? Oneida Air's Dust Deputy will transform your shop vacuum and the way you work! Trap dust in the barrel and NOT in your shop vacuum. Filters over 99% of sanding dust; less than 1% goes into the vacuum. Extends the life of your shop vacuum and your filters. Extremely efficient, cyclonic pre-separator for wet/dry vacuums. Cyclone is constructed of a translucent anti-static resin and features tapered ports to connect to most shop vacuum hoses. Note: The Dust Deputy is not for use with highly explosive dust, corrosive, or hot/smoldering materials.
- Color: Clear
- Brand: Oneida Air Systems
- ASIN: B002GZLCHM
- UPC: 864527000000
Bosch 9 Gallon Dust Extractor with Auto Filter Clean and HEPA Filter VAC090AH
Bosch 9 Gallon Dust Extractor with Auto Filter
The Bosch VAC090AH 9-gallon dust extractor with auto filter clean and HEPA filter provides a complete package that is designed to help users move toward compliance with the OSHA silica dust regulation. The dust extractor delivers a maximum 150-cubic-feet-of-air-per-minute rate (CFM), with a sustainable 97 in. Static water lift (maximum). the automatic on-board filter-cleaning system activates every 15 seconds to help maintain maximum suction power. The included HEPA filter captures 99.97% of particles at 0.3 microns and larger. The included fleece filter bag helps to protect the filter and provides the optimal Containment of dry dust and debris. The dust extractor also has power tool activation that allows the tool to activate the vac and a power broker dial to match the suction force to application.
- Brand: Bosch
- ASIN: B076CSZXY3
- UPC: 000346509526
FEIN Turbo I Vacuum Cleaner, 5.8 Gallon, 1100W | Includes: 13 ft Suction Hose, Tool Coupling with Suction Power Control, Cellulose Filter, 1 Fleece Filter Bag
FEIN Turbo I Vacuum Cleaner, 5.8 Gallon, 1100W
Fein Turbo 1 vacuum with 5.8 gallon tank which includes an Auto-start wet dry vacuum. Powerful 1100 watt by-pass motor is ideal for the job site or DIY use. An integrated power tool socket with automatic start/stop function ensures that the extractor starts after a power tool has been switched on. 66 DB noise level. Air flow rate 151 CFM ensures a high air flow to pull up everything! Bypass motor allows for the dirty air that comes from the hose never to come into contact with the motor. This eliminates dust spewing out from the motor when you turn the vacuum on and a very long life of the product. Simply said what goes in the vacuum stays in the vacuum. Filter guard for flat fold filter if the filter is dirty, the dirt can simply be tapped out of the filter cassette without the flat fold filter being damaged, The protective filter cassette means that there is no need to replace the cellulose filter for wet extraction. Long 13' ft. hose and 18' ft. cord for long reach allows you to be 54' ft. from the outlet.
- Brand: Fein
- ASIN: B00K69ILFQ
Festool 575267 CT MIDI HEPA Dust Extractor
Festool 575267 CT MIDI HEPA Dust
The CT Midi is the ideal companion for assembly, installation, or renovation work. The compact wet/dry dust extractor with a 15 L container volume is perfect for cleaning work with small to medium dust and dirt volumes. The technical details are also highly sophisticated: infinitely adjustable suction power, two-layer filter bags, Flat filter for full utilization of the filter bag volume or tool-free replacement of the filter and filter bag. Carries full unit HEPA certification.
- Color: Green
- Brand: Festool
- ASIN: B07BBTTBVC
Makita XCV11Z 18V LXT Lithium-Ion Brushless Cordless 2 Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum, Tool Only
Makita XCV11Z 18V LXT Lithium-Ion Brushless Cordless 2
The 18V LXT Brushless 2 gallon HEPA filter portable wet/dry dust extractor/vacuum, tool only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99. 97% of particulates . 3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water Lift of suction with just one 5. 0Ah battery (sold separately).
- Brand: Makita
- ASIN: B07M8JTDNS
- UPC: 088381870474
The Dust Deputy DIY Standalone Anti-Static Cyclone Separator
The Dust Deputy DIY Standalone Anti-Static Cyclone
Tired of using your shop vacuum and getting poor results? Oneida's Dust Deputy will transform your shop vacuum and the way you work by trapping dust in a barrel and NOT in your shop vacuum. Injection molded from a translucent anti-static resin, the patented design of Oneida Air's Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum's filter, eliminating clogged filters and suction loss while extending the life of your shop vacuum! The Oneida Dust Deputy DIY (Do-It-Yourself) cyclone let's you build the dust control system that works best for you. You supply the waste container, the hardware, the hose, etc. Then add the award-winning cyclone separator. With the DIY cyclone you're limited only by your imagination! The Dust Deputy will save you time and money on expensive replacement vacuum filters and dust bags, allowing you to keep working harder, longer, and safer than ever! This simple and efficient design can be adapted for use with any make, size, or model wet/dry vacuum and features tapered 2.0" ports for secure fittings using a variety of hose sizes.
- Color: Clear
- Brand: Oneida Air Systems
- ASIN: B002JP315K
- UPC: 864527000017
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400 CFM)
WEN 3410 3-Speed Remote-Controlled Air Filtration System (300/350/400
Remember when your workshop was full of clean air? Air-borne dust particulates can dirty up a woodworker's workshop and harm a healthy respiratory system, but with the WEN 3-Speed Remote-Controlled Air Filtration System, you no longer need to worry. This system eradicates these contaminants by catching them in one of the two easily cleanable filters while circulating the air in your work area. The powerful 1/6 HP motor leaves no stone unturned, collecting every contaminant in its path. Quiet system creates 50 to 60 dB of noise and is controllable up to 26 feet away with the included remote. The lightweight design weighs in at a mere 31 pounds. Combine this with the attached carrying handle and eyebolts for easy mobility, mounting and installation. The WEN Air Filtration System collects and releases the air in your workshop after filtering it through both a 5-micron outer filter and a 1-micron inner filter. Easily switch between three speeds of 300, 350 and 400 cfm depending on what the situation calls for. With the time feature, you don't even have to worry about turning off your machine. Simply set the timer and the machine will turn off on its own once the time runs out, allowing you to easily give your workshop a thorough cleanse at the end of a day of woodworking without havi...
- Color: Black
- Brand: WEN
- ASIN: B00LPD9BDI
- UPC: 044459034100
Festool 575280 CT SYS HEPA Dust Extractor
Festool 575280 CT SYS HEPA Dust
Portable and compact, yet loaded with features such as full unit HEPA certification, tool-triggered operation, high-performance suction, and Systainer integration. The CT SYS is ideal for remodelers and painters who need the utmost in portability, yet without compromise in function. Self-contained hose and cord storage, onboard tools, manual and automatic function, shoulder strap, Anti-Static design, system integration, and low sound (67 dBA)), the CT SYS is Well-Equipped and built for professional use. The CT SYS system is small in size, big in performance. Carries full unit HEPA certification.
- Brand: Festool
- ASIN: B07CP6PLS8
SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
DEWALT DCV585B FLEXVOLT 60V Max Dust Extractor (Tool Only)
DEWALT DCV585B FLEXVOLT 60V Max Dust Extractor (Tool
Running off of the flexible 20V/60V max*battery, the DCV585 cordless dust extractor is an efficient and portable way to achieve OSHA Table 1 compliance on the jobsite. This product features wireless tool controllable; with remote, allowing the user to activate the extractor from the tool, at a distance. It also features a automatic filter cleaning mechanism and includes HEPA filters. The flexible 20V/60V max* battery powers our full range of 60V max* tools, and it's backwards compatible to work with 20V max* tools. Purchase battery separately.
- Brand: DEWALT
- ASIN: B07N2KBM8W
- UPC: 885911539135
DEWALT Table 1 Compliant SDS Plus Dus
Dust Extractor, 120V, 130cfm, 8 gal.
Dust Extractor, 120V, 130cfm, 8
Dust Extractor, 15 Amps, Air Flow 130 cfm, Voltage 120V, Bag Type Paper, Filter Type HEPA, Series Commercial/Industrial/Contractor, Static Pressure 50 In. , Height 20 In. , Length 20 In. , Width 20 In. , Tank Size 8 gal. , Power Cord Length 8 ft. , Hose Dia. 1-1/4 In. , Hose Length 15 ft. , 60 Hz, Net Weight 22 lb. , Tank Material Polypropylene, 1 yr. , Sound Level dBA 76, Number of Motor Stages 1, Includes (2) HEPA Filter, Anti-Static Hose, Standards UL
- Brand: DEWALT
- ASIN: B07Q31MP7X
- UPC: 885911333535
Festool 583492 CT 26 E HEPA Dust Extractor
Festool 583492 CT 26 E HEPA Dust
The new CT26 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT26 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT26 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. Will work wet or dry with no complex conversion, and is remarkably quiet. Includes: CT 26 E - 6.9 Gallon HEPA Mobile Dust Extractor, HEPA Filter, (1) Fitted Filter Bag, and (1) 1 1/16" x 11.5' Antistatic Suction Hose. Additional Info: HEPA Filter Surface Area: 3.29 ft2, Weight: 28.7 lbs, ower Cord 12 AWG: 24.5' length, Stepless electronic suction control.Festool products can only be sold in the 50 states.
- Color: Black and Light Grey
- Brand: Festool
- ASIN: B003XWAZ9S
WEN 3401 5.7-Amp 660 CFM Dust Collector with 12-Gallon Bag and Optional Wall Mount
WEN 3401 5.7-Amp 660 CFM Dust Collector with
Remember when you had the sawdust in your woodshop under control? Keep your work area clean and organized with the WEN 12-Gallon Dust Collector. With a 5.7-amp motor moving over 660 cubic feet of air per minute, we can say with confidence that this thing really sucks. The 6-inch impeller combined with the 4-inch dust port inlet lets you connect to your favorite woodworking tools. The four 1-3/4 inch swivel casters lock in place to prevent unwanted movement while the compact design makes for easy storage and transport between jobs. Take off the wheels and mount it to your shop’s wall with the optional built-in wall mount for accessible dust collection whenever you need it. Compatible with the WEN 10-Foot Dust Hose (model 28200) and the WEN 20-Foot Dust Hose (model 28221). And because its a WEN product, your dust collection system comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
- Brand: WEN
- ASIN: B07D9YHZ87
- UPC: 044459034018