30A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

30A RC Brushless Motor Electric Speed Controller ESC

The RC Electric Parts 30A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC. Benefits: Programmable either using a programming card or transmitter Super smooth and accurate linear throttle adjustment Supports high RPM motors. Utilizes smaller MOSFETs to minimize weight. Minimal heat dissipation Specs: Continuous: 30A Bursts 40A for 10 seconds UBEC: 5V/3A Lipo Battery: 2 - 4s (cells) NiCd/NiMH: 5 - 12s (cells)Voltage Input: 6.4v - 16.8vSize: 54mm x 26mm x 11mm Weight: 32g Motor Type: Brushless MotorMax RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motorESC Manual Link https://www.rcelectricparts.com/esc-user-guide.htmlProgramming Card Linkhttps://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp

  • Brand: RC Electric Parts
  • ASIN: B071GRSFBD
  • UPC: 796752625522

Casolly Variable Fan Speed Controller for Exhaust Duct Inline Fan

Casolly Variable Fan Speed Controller for Exhaust Duct

-Specifications: Material: plastic / aluminum Voltage Capacity:120 Volts,60Hz Current Capacity: 15amps Dimensions: 4-3/8"(L) 2-9/16"(W) 2-3/4"(H) Line core: 2m/6.6 ft. Plug:3-pole , American(grounded) Weight:0.95lbs Package Include 1x speed control 1x manual It is widely used for controlling heating elements, motors (be careful here, it only works with certain types of motor). You just plug in the power cord and you can use the 3-way switch for Var(iable), Off, and Full. It is speed to be able to handle 15 amps (1500W). WARNING:When using tool,basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Don't use it on brushless type motors. Works with any universal AC/DC brush type motor, 15 amps and under.Don't use on brushless type motors, will not work on soft/slow start routers.

  • Brand: Casolly
  • ASIN: B07BMR4THQ
  • UPC: 659516289227

40A RC Brushless Motor Electric Speed Controller ESC 3A UBEC with XT60 & 3.5mm bullet plugs

40A RC Brushless Motor Electric Speed Controller ESC

The RC Electric Parts 40A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC. Benefits: Programmable Super smooth and accurate linear throttle adjustment Supports high RPM motors Utilizes smaller MOSFETs to minimize weight Minimal heat dissipation Specs: Continuous: 40A Bursts: 60A for 10 seconds UBEC: 5V/3A Lipo Battery: 2 - 4s (cells) NiCd/NiMH: 5 - 12 cells Size: 71mm x 35mm x 10.5mm Weight: 48g Motor Type: Brushless MotorMax RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motorESC Manual: https://www.rcelectricparts.com/esc-user-guide.htmlProgramming Card Linkhttps://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp

  • Brand: RC Electric Parts
  • ASIN: B0754H7XZZ
  • UPC: 796752625539

60A RC Brushless Motor Electric Speed Controller ESC 4A UBEC with XT60 & 3.5mm bullet plugs

60A RC Brushless Motor Electric Speed Controller ESC

The RC Electric Parts 60A Electric Speed Controller (ESC) is a great little powerful ESC that runs very well and doesn't run hot like other ESCs! The ESC comes pre-soldered with 3.5mm Bullet Plugs and an XT60 Plug, eliminating the need for you to solder your own plugs on! The ESC can be programmed via the transmitter as explained in the instructions or using a programming card that can be purchased separately. Make sure to use an RC Electric Parts Programming card to ensure that it'll properly program the ESC. Benefits: Programmable Super smooth and accurate linear throttle adjustment Supports high RPM motors Utilizes smaller MOSFETs to minimize weight Minimal heat dissipation Specs: Continuous: 60A Bursts 80A for 10 seconds UBEC: 5.5V/4A Lipo Battery: 2 - 4s (cells) NiCd/NiMH: 5 - 12 cells Size: 71mm x 35mm x 17mm Weight: 68g Motor Type: Brushless Motor Brushless MotorMax RPM: 240,000 rpm for a 2 pole, 80,000 rpm for a 6 pole, or 40,000 rpm for a 12 pole brushless motorESC Manual: https://www.rcelectricparts.com/esc-user-guide.htmlProgramming Card Linkhttps://www.amazon.com/dp/B07GCVLJ12?ref=myi_title_dp

  • Brand: RC Electric Parts
  • ASIN: B079CNVCYF
  • UPC: 796752625553

nidici BLHeli-32 30A ESC 32bit Brushless Electric Speed 2-4s Controller for DShot1200 FPV Racing Drone(Pack of 4)

nidici BLHeli-32 30A ESC 32bit Brushless Electric Speed

Details The 32bit 30A ESCs feature the powerful STM32F051 48MHZ ARM 32-bit micro-processor. This 32bit processor allows the ESC to perform with incredible precision, resulting in smooth and responsive power. The ESCs are low profile and compact in size, saving weight and making builds easy. The ESCs are OPTO (no BEC) and come pre-soldered with motor, signal and power wires for your convenience. The ESC features state of the art firmware pre-installed on them, no need for flashing or updating constantly. They are compatible with PWM, Oneshot125, Oneshot42, Dshot 1200 and Multishot protocols. Simply enable the feature in the flight controller software and the ESC will automatically match it. The ESCs is extremely smooth throttle response the 32bit proccessor delivers. There is a wide throttle range of 1480 steps, ensuring a high resolution. We're sure you'll be impressed with the performance of these ESCs. Features STM32F051 48MHZ ARM 32-bit micro-processor Dedicated Gate drivers, PMSM Hardware PWM driver Custom designed for multirotors Ultra Lightweight, and compact size Adaptive timing, compatible with a wide range of motors and Kv Sychronous rectification technology adds efficiency Powerful regenerative braking / active braking. Blocking Protection - If the propeller is b...

  • Brand: NIDICI
  • ASIN: B07FD4G32J
  • UPC: 680465696293

FPVDrone 2-4S 30A ESC SimonK Brushless Motor Speed Controller ESC with BEC 2A for Quadcopter Multicopter(4PCS)

FPVDrone 2-4S 30A ESC SimonK Brushless Motor Speed

Features -Highest efficiency 100% N-FET design. -Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's). -No low voltage cutoff, because any cutoff in a multirotor = crash. -No over temp cutoff, because any cutoff in a multirotor = crash. Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate. -16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal). -Super simple, foolproof operation! Nothing to program other than the throttle range. --Don't buy a 30A multirotor ESC that doesn't meet all these criteria! -There are a lot of low quality 30A ESC out there! ESC Specification Cont Current: 30A Burst Current: 35A BEC Model: Linear mode BEC Output: 5V2A Li-ion/Li0poly:2-4S,or Ni-MH/Ni-Cd:4-12NIMH Weight: 25g Size: 32*24*7mm Packet content: 4 x 30A SIMONK ESC Brushless Speed Controller

  • Brand: FPVDrone
  • ASIN: B07MBD6HCH
  • UPC: 711005953900

YoungRC A2212 1000KV Brushless Motor+ 30A ESC Electric Speed Controller with Gold Bullet Banana Plugs for RC Multicopter Quadcopter

YoungRC A2212 1000KV Brushless Motor+ 30A ESC Electric

Color:A2212 1000KV/13T Brushless Motor+30A ESC+3.5mm gold bullet banana plugs + heat shrink tubes A2212/13T 1000kv brushless motor: KV: 1000 Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3 Li-Poly Motor Dimensions: Φ27.5 x 30mm Shaft Diameter: Φ3.17mm Weight: 47g1 Motor with 1 Bullet blade clamping head,1 Cross and 4 Screw 30A Electric Speed Controller: Output: Continuous 30A, Burst 40A up to 10 Secs. Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NIMh battery. BEC: 1A / 5V (Linear mode). Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM;35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) Size: 45mm (L) * 24mm (W) * 11mm (H). Weight: 25g. ESC Protection function: Automatic selection of 2-3LIPO, the protection voltage is 6V/9V respectively ; Automatic selection of NIMH, each protection voltage is 0.8V; Safe start, the wrong throttle position is not allowed to start; Temperature protection, 110 degree surface temperature shutdown; Out of control protection, no signal, stop after 1 second. Package: 1 Pc A2212 1000KV Brushless Motor with 1 Bullet blade clamping head,1 Cross and 4 Screw 1 Pc 30A ESC Speed Controller

  • Brand: YoungRC
  • ASIN: B075ZSDR2T
  • UPC: 711005954563

Wingsmoto 36v 500w Motor Speed Controller Electrical Scooter E Bike Bicycle Tricycle Brush Motor Control Box

Wingsmoto 36v 500w Motor Speed Controller Electrical Scooter

Work Voltage: 36Volts Matching Motor: DC brushed motor Rated Motor Power: 500 watts Under Voltage Protection: 31.5V±0.5V Usable Motor: 36V 500 Watts Speed governor 1-4 V(Throttle ) Function: This controller is uitable for electric bike tricycle & scooter This is a brush motor controller. Wires Interface Description: Yellow & black(1) : brake,Thin yellow (Brake signal)/thin black(Negative Power) Red, Black & Blue(2): Speed governor(Throttle ) Thin blue(Speed handlebar Signal input) /Thin black (Negtive Power) /thin red(1-4V Positive Power) Red & Black(3) (small cable): Charging port.Thin red (charge input power Positive) /thin black (Power negative) Red & Black(4)(small cable) : indicator light.Thin red (Indicator power output) /thin black (indicator negative) Red & Blue(5) : Key Switch(power locks).Thin Red(VCC)/Thin Blue. (If there is no power locks,red connection to blue) Red & Black(6): Brake light,Thin red (power Positive) /thin black (Power negative) Yellow & Blue(7) : Motor connections, Thick Yellow (Motor Negative) /Thick Blue (Motor Positive) Red & Black(8) (large cable) : Battery connections, Thick Black (Power Negative) /Thick Red (Power Positive)

  • Brand: Winsgmoto
  • ASIN: B074TDMDNC
  • UPC: 614070524962

KB Electronics 8811006 Solid State Variable Speed AC Electric Motor Control, 2.5 Max amp, 115V, # K177-1002

KB Electronics 8811006 Solid State Variable Speed AC

Control provides infinite variable speed for shaded pole and PSC motors. Max amps means that the rated motor name plate amperage can not exceed this rating or you will damage the control and motor. Motor must be run with sufficient torque to prevent stalling - A motor not turning will burn up Motor must have fan blade installed on shaft (direct drive) to cool motor. Not to be used with gear motors. Controls that have been installed are not returnable.

  • Brand: KB Electronics
  • ASIN: B000F9B712
  • UPC: 663001451662

Makerfire 4pcs BLHeli-32 32Bit 35A ESC Brushless ESC Dshot1200 Electronic Speed Controller 2-4S for FPV Multicopter Quadcopter

Makerfire 4pcs BLHeli-32 32Bit 35A ESC Brushless ESC

What can the increased MCU speed do?First of all, it can run input signals with lower latency at faster rates. DSHOT up to at least DSHOT1200, and at rates up to at least 32kHz is now supported.Secondly it allows packing of more functionality.  1. Programmable pwm frequency, up to 48kHz, that can run motors even smoother, and also allows for moving of small but potentially disturbing humps in the throttle response. All ESCs have these bumps, with BLHeli_32 they can now be moved in the rpm range, to a place where the system has low sensitivity to them. 2. Auto timing. Which is not the option to choose if you're after max power. But if you want the most efficient running with very good robustness against desync, it is the perfect choice.Like voltage and current limiting. Which is implemented in the code, and will be supported on some ESCs. Voltage limiting is desirable for fixed wing crafts. And current limiting adds protection against ESC failure. 3. Programmable brake on stop force. Which allows control of the braking of fixed wing props. 4. Improved direction change in bidirectional mode. 5. More to come in the future. Such as setup from the FC by using Dshot commands. Such as telemetry functionality. There is room to grow performance and functionality.Specification:MCU: STM32F...

  • Color: 35a Esc 2-4s
  • Brand: Makerfire
  • ASIN: B075M7MGJL
  • UPC: 190033938941
Similar Electric Speed Controller Results