Design Engineering 050501 21" x 24" Floor & Tunnel Shield II - Adhesive Heat and Sound Insulation

Design Engineering 050501 21" x 24" Floor &

Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, the DEI Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. It provides excellent lightweight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750 degrees Fahrenheit of direct continuous heat. The adhesive side holds past 450 degrees Fahrenheit. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including,...

  • Brand: Design Engineering
  • ASIN: B000E243AW
  • UPC: 607078505019

Design Engineering 050509 Boom Mat Floor & Tunnel Shield II - Heat and Sound Insulation, 42" x 48" (14 sq. ft.)

Design Engineering 050509 Boom Mat Floor & Tunnel

Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, the Boom Mat Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. It provides excellent lightweight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750 degrees Fahrenheit of direct continuous heat. The adhesive side holds past 450 degrees Fahrenheit. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces inclu...

  • Brand: Design Engineering
  • ASIN: B005Q58H04
  • UPC: 607078505095

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier, 12" x 24"

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier, 12"

The Thermo-Tec Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000 degrees Fahrenheit. The adhesive backed side handles direct and continuous temperatures up to 300 degrees Fahrenheit. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.

  • Brand: Thermo-Tec
  • ASIN: B00029KC2K
  • UPC: 755829135753

Hiwow 5FT Heat Sleeve Fiberglass Adjustable Heat Shield Sleeve Black Color (5FT X 20MM(3/4''))

Hiwow 5FT Heat Sleeve Fiberglass Adjustable Heat Shield

Black heat sleeve ★ Mainly made of high quality fiber glass. ★ Withstands 1100℉continuous and 2000℉intermittent ★ Capable of reducing up to 60 percentage of radiant heat ★ Helps to prevent vapor lock, protects wires from melting ★ Size 1/2''ID 1/4''ID 3/4''ID 3/8''ID 1''ID and so on Uses: This is a perfect way to protect wires, fuel lines, brake lines and clutch lines for your custom build. It is ideal for shieding fuel lines, helping to prevent vapor lock, protecting sensitive wire looms form close proximity heat, shielding brake lines and hose and stopping clutch cables from melting. Many length to choose. Warning: You'd better wear long sleeve gloves when installing. For skin irritations wash with soapy water and rinse well. For eye irritation, flush eyes with cold water.

  • Brand: HiwowSport
  • ASIN: B075M9ZSLJ

Design Engineering 050503-16 Floor and Tunnel Shield

Design Engineering 050503-16 Floor and Tunnel

We at Design Engineering, Inc. (DEI), one of the foremost suppliers of thermal tuning products, are very proud to welcome you to our website.  We have listened to our customer comments over the years and tried to incorporate all that we have learned from them.  Our goal with this site is to provide education and information on our products.  Please take note of such features as the language translation bar in the top right corner of every page and our social networking connections offer many options to stay connected with DEI.  We have improved our store finder to be more user friendly especially for Canadian and other international friends.

  • Brand: Design Engineering
  • ASIN: B01N1I2TMP
  • UPC: 647367271638

Thermo-Tec 14620 60" X 36" Heat and Sound Suppressor

Thermo-Tec 14620 60" X 36" Heat and Sound

The Suppressor is ideal when both sound and radiant heat control is needed.

  • Color: Silver
  • Brand: Thermo-Tec
  • ASIN: B004PILLZG
  • UPC: 155829146207

Design Engineering 010412 Reflect-A-Cool Heat Reflective Adhesive Backed Sheets, 36" x 48"

Design Engineering 010412 Reflect-A-Cool Heat Reflective Adhesive Backed

DEI Reflect-A-Cool is constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400 degrees Fahrenheit and has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be used, and industrial applications. Reflect-A-Cool can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy.

  • Brand: Design Engineering
  • ASIN: B000E267J2
  • UPC: 607078104120

Design Engineering 010392 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Sheet, 12" x 24" Sheet

Design Engineering 010392 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive

DEI Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove. A highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat. Available in adhesive backed rolls or sheets.

  • Color: Gold
  • Brand: Design Engineering
  • ASIN: B0039Z5TRC
  • UPC: 607078103925

Design Engineering 050526 Corvette C6 Trans. Tunnel Shield

Design Engineering 050526 Corvette C6 Trans. Tunnel

DEI's solution to your Corvette's hot interior. Our transmission tunnel plate and side insulator's will block heat from your exhaust from under your center console. The result is a cooler interior with less road noise.

  • Brand: Design Engineering
  • ASIN: B079J3DM52

ERPART BLACK on Silver CROSSBONES SKULL Cross Bones Skeleton Pirate Jolly Roger Real Aluminum Auto Emblem Badge Nameplate

ERPART BLACK on Silver CROSSBONES SKULL Cross Bones

Crossbones Skull emblem is Approx. Width 2.91" inches x Height 2.36" inches [74 mm x 60 mm]. The emblem is made of high-quality, aircraft aluminum and hard-anodized finish for a long-lasting result. It comes with self-adhesive 3M tape for easy, simple installation. It can be installed in ANY smooth surface inside or outside any vehicle. Imported from Japan. You can install this emblem on the trunk, fenders, interior console, etc. *Note: Some emblems also look great on cell phones, laptops and computers. **Note: Surface must be clean and dry prior to adhering. ***NOTE: Please Note that these are NOT the cheap Vinyl and Decal Emblems sold all by most on the Internet. The Emblem is made of high quality Thin ALUMINUM and is noticeably different.

  • Color: Black
  • Brand: ERPART
  • ASIN: B00FZ2UF26
  • UPC: 753677069831

Mopar 82214793 Fuel Filler Door

Mopar 82214793 Fuel Filler

Molar® parts and accessories are durably constructed and rigorously tested to meet FCA US LLC performance standards. Give your vehicle a sporty look by adding a unique Aluminum Fuel Filler Door designed to ensure easy, no-drill installation and smooth door operation.

  • Color: BLACK
  • Brand: Mopar
  • ASIN: B076CRSDY6
  • UPC: 840984168996

St. Louis Crafts 36 Gauge Aluminum Metal Foil Roll, 12 Inches x 10 Feet

St. Louis Crafts 36 Gauge Aluminum Metal Foil

The St. Louis Crafts Aluminum foil roll has excellent pliability and shapes easily by hand. Perfect for tooling, plaques, pictures, facings, and overlays. Soft metal foil is convenient to work and can be cut with household scissors. Use of gloves when handling is recommended.

  • Color: Aluminum
  • Brand: St Louis Crafts
  • ASIN: B0042SSQMU
  • UPC: 760060649112

Vibro Black 80 mil Car Sound Deadening Mat -Audio Noise Insulation Car Sound Dampening- Sound Dampener Insulator- Automotive Sound Deadener- Butyl-20 Sheets -Buy Made in America- Not Russia or China

Vibro Black 80 mil Car Sound Deadening Mat

Vibro Solution 80 mil Sound and Vibrodamping products uses mass loading to lower panel resonance and absorb structural vibrations, converting them into low level heat. Stop those nasty rattles, eliminate road and outside noise, insulate your vehicle and dramatically improve the sound of your car audio stereo system. Our vibration damping products are a polymeric based damping material with a supercharged adhesive. With an Aluminum surface and a unique military-grade composition, it has been proven to be extremely efficient at the conversion of vibration to thermal energy. Vibro Solution is very flexible which is very important to the installer, as it allows it to properly adhere to a contoured panel. This product can be installed anywhere in your vehicle, but is mainly installed within door panels both inner and outer and roof. Vibro Solution sound and vibration damping are already the choice of many car audio companies.

  • Brand: Vibro Solution
  • ASIN: B079LV7VFK
  • UPC: 703624224301

HangTime World's Greatest Dad Parking Only

HangTime World's Greatest Dad Parking

A great gift for Dad. 8 x 12 inch parking sign will reserve his place in the garage or carport. Baked on finish. Embossed lettering. Brand new in factory shrink wrap. Made in the USA.

  • Color: White Red
  • Brand: HangTime
  • ASIN: B007MVKBFY
  • UPC: 762324809454

Rockford Fosgate RFDS-PLATE Sound Deadening License Plate Kit

Rockford Fosgate RFDS-PLATE Sound Deadening License Plate

License plate frame with premium sound deadening material for back of plate. Premium sound deadening material with butyl rubber backing, featuring anti-vibration technology. Each package features (1) 3.3" x 10" sheet of sound deadening material with license plate frame.

  • Brand: Rockford Fosgate
  • ASIN: B01BTSWSY2
  • UPC: 780687350420
Similar Embossed Aluminum Sheet Results