Makita JS8000 Variable Speed Fiber Cement Shear Kit

Makita JS8000 Variable Speed Fiber Cement Shear

  • Color: Teal
  • Brand: Makita
  • ASIN: B000N5URAU
  • UPC: 088381092340

PacTool SS204 Snapper Shear For Cutting Up To 5/16" Fiber Cement Siding, 4.8 Amp Motor

PacTool SS204 Snapper Shear For Cutting Up To

The PacTool SS204 Snapper Shear fiber cement siding shear combines our famous precision-machined cutting head with a compact 3/8 inch drive motor. While the SS404 is geared toward the professional, the SS204 is a great lower cost alternative for the non-professional audience who is looking to side a few houses. Designed specifically for 5/16 inch fiber cement siding cutting, the solid steel blades are reversible and fully replaceable. Expected life before replacement is 20,000 linear feet, roughly 15 average houses when used appropriately. The Snapper Shear design actually shears the cement siding rather than cutting it, resulting in an OSHA compatible jobsite, less mess, minimal airborne dust and faster clean-up. This is a corded, 110 volt tool and, when used along with PacTool’s Gecko Gauges (item SA903), is a fast, efficient way to install fiber cement siding. Replacement blades set is item 40253 for straight cuts and 41253 for curved and circle cuts. PacTool is owned by General Tools - the precise tool for doing the job exactly right. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please c...

  • Brand: PacTool
  • ASIN: B001MUSY6E
  • UPC: 645646204001

Malco TSF2 TurboShear Fiber Cement Backer Board Shear

Malco TSF2 TurboShear Fiber Cement Backer Board

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSF2 makes cuts in 1/2" (13 mm) backer board and will also cut 5/16” fiber cement siding. Use this to make straight minimum dust cuts and arcs with the capability to navigate curves for window and door arcs! The blades are made of treated high carbon steel and feature a reversible skid plate to assure long service life. Replacement blade and skid plate TSF2RB

  • Color: NA
  • Brand: Malco
  • ASIN: B0014E9WN2
  • UPC: 686046530956

PacTool SS404 Contractor Grade Snapper Shear For Cutting Up To 5/16" Fiber Cement Siding, 6.5 Amp Motor

PacTool SS404 Contractor Grade Snapper Shear For Cutting

  • Brand: PacTool
  • ASIN: B0000DCBJH
  • UPC: 637825901665

DEWALT D28605 5/16-Inch Variable Speed Fiber Cement Siding Shear

DEWALT D28605 5/16-Inch Variable Speed Fiber Cement Siding

  • Color: Yellow
  • Brand: DEWALT
  • ASIN: B000H2QPFA
  • UPC: 028877552057

Malco TSF1 Turboshear Fiber Cement Siding Shear

Malco TSF1 Turboshear Fiber Cement Siding

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Fast cutting blades are specialized for fiber cement siding only. The blades design minimizes dust. Wide skid plate design stabilizes for a precise clean cut (including window and door arches) in fiber cement siding up to 5/16” (8mm). Replacement blade TSF1RB.

  • Color: NA
  • Brand: Malco
  • ASIN: B0014EBQP4
  • UPC: 686045533941

PacTool International SA903 Gecko Gauge, Fiber Cement Siding Installation Tool (1 Set)

PacTool International SA903 Gecko Gauge, Fiber Cement Siding

Gauge Gecko 5-8 Inch 2 Pack

  • Color: Multi
  • Brand: PacTool
  • ASIN: B000VERBCU
  • UPC: 716080054214

Malco TSF1A Turboshear Pneumatic Fiber Cement Siding Shear

Malco TSF1A Turboshear Pneumatic Fiber Cement Siding

Use AIR PRESSURE for unstoppable shearing power! Combined with Malcos unique TurboShearFC Design, the TSF1A is the ultimate tool for those who want to make quick, clean cuts in fiber cement siding including window and door arches! Fast cutting blades are specialized for fiber cement siding only.

  • Brand: Malco
  • ASIN: B0014ED1TS
  • UPC: 686046533964

Malco TSF2A Turbo Shear Pneumatic Fiber Cement Backer Board

Malco TSF2A Turbo Shear Pneumatic Fiber Cement Backer

A standard gas powered job-site compressor with 50-foot (15.24 m) hose set-up is adequate to power this fiber cement backer board shear. A sleek, compact and lightweight design with 45-degree hose clearance allows the tool to go anywhere the work is. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts. Fast, accurate cutting air-power is a welcome replacement for messy, imprecise, scoring and snapping methods of trimming backer board. A wide skid-plate on the head design stabilizes cutting action for extra-smooth results in 1/2-in. (12.7 mm) backer board. This versatile shear also navigates curved-pattern cuts for window and door arches. The hardened carbon steel blade and skid plate ensure long uninterrupted service. You can even rotate the tool's skid plate to maximize acceptable cutting life. And the blade and skid plate set is also easily replaceable on the job.

  • Brand: Malco
  • ASIN: B00JJ6PR4A
  • UPC: 686046535449

DEWALT DCS498B 20V Max Cordless Fiber Cement Shears (Tool Only)

DEWALT DCS498B 20V Max Cordless Fiber Cement Shears

DEWALT DCS498B Fiber cement Shear (tool only). Little to no dust created during cutting action. 20V Metal Shear; hex wrench

  • Brand: DEWALT
  • ASIN: B07GLC3Z4C
  • UPC: 885911538503
Similar Fiber Cement Cutting Shear Results