CM ShopStar Electric Chain Hoist, Single Phase, Hook Mount, 1/4 Ton Capacity, 12' Lift, 12 fpm Max Lift Speed, 0.167 HP, 7/8" Hook Opening, 115V

CM ShopStar Electric Chain Hoist, Single Phase, Hook

H4 duty cycle (300 motor starts/hour). Easy installation and maintenance. Standard protector overload device. 10 pocket oblique lay liftwheel provides longer chain wear. Epoxy powder coat finish. 6-1/2' Power cord with molded 3 prong plug on 115 volt units. NEMA 4 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM hoist alloy load chain. Thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Small, compact design for commercial and industrial applications. Rigid hook suspension prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360 degree. Totally enclosed non-ventilated hoist frame protects motor from environmental contamination. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. 500 lbs capacity, 10' lift height, ShopStar hoist model. 11-1/16" headroom, 115-1-60 power supply, 1 speed control, no limit switches, hook mounting.

  • Brand: CM Shopstar
  • ASIN: B004CFBE9U
  • UPC: 043927620890

Harrington Mini Cat AH Manipulator Model Air-Powered Hoist, Hook Mount, 250 lbs Capacity, 13' Lift, 41 fpm Max Lift Speed, 12" Headroom, 0.9" Hook Opening, 3/8" NPT, 90 psi

Harrington Mini Cat AH Manipulator Model Air-Powered Hoist,

The Harrington Mini-Cat AH manipulator model with hook mount is an air-powered hoist with a one-hand control for left- or right-handed operation, low headroom design, and unlimited duty cycle for continuous operation in high-volume production environments. It has a spring-loaded, eight-vane motor to facilitate air feathering control for precise load handling and gentle load placement. This hoist has an average decibel rating (dBA) of 80dBA, measured at a distance of three feet from the exhaust manifold, for comfortable noise levels. It also has an aluminum valve section and a nickel plated load chain for resistance to corrosion, abrasion, and wear. The Harrington Mini-Cat AH air hoist is typically used in high-production manufacturing or construction environments that require continuous operation in areas such as assembly lines or workstations, but also may be used for similar applications in other industries. This hoist is produced to comply with American Society for Mechanical Engineers (ASME) B30.16 and ASME HST-5M standards. When used according to manufacturer’s recommendations, this product is covered by a one-year warranty from date of shipment against defects in workmanship or materials. Hoists are devices that use relatively small amounts of force to lift, lower, and ...

  • Brand: Harrington
  • ASIN: B004SHT53E

Vestil VS-ECH Variable Speed Electric Chain Hoist, Single Phase, Hook Mount, 1000 lbs Capacity, 13' Lift, 20 fpm Max Lift Speed, 220V

Vestil VS-ECH Variable Speed Electric Chain Hoist, Single

The Vestil VS-ECH variable speed electric chain hoist is an electric power hoist with a hook mount, single phase motor, and infinitely adjustable speed from zero to 49 feet per minute (FPM) to facilitate control of the lift operation. The hand control on this hoist has a speed knob and individual up/down push buttons to help facilitate ease of use. This hoist has an auto brake designed to hold load in event of power loss for added safety, and a chain container that holds slack load chain during operation. Hoists are devices that use relatively small amounts of force to lift and lower heavy loads. Power hoists transfer a small motor-generated force across a series of gears that multiply the force into one large enough to lift the designated load. Their lifting mechanisms consist of a motor; drive shaft and gear set; and a chain, rope, or wire, with a hook attached to it for lifting loads. Hoists are commonly suspended from structures by hook or trolley mounts, and are used in a variety of industries such as transportation, construction, manufacturing, mining, and material handling. Load capacity is the maximum rated load a hoist can handle. While manufacturers may indicate they have tested a hoist beyond its limits, operators should never attempt to lift a load heavier than the...

  • Brand: Vestil
  • ASIN: B0054M1J9A

OZ Lifting Builders Electric Chain Hoist, Hook Mount, 1/4 Ton Capacity, 90' Lift, 75 fpm Max Lift Speed, 115V

OZ Lifting Builders Electric Chain Hoist, Hook Mount,

The hoist is designed for commercial building sites, as well as various construction workplaces, such as warehousing, buildings, storage areas, and factories in general. Compact and lightweight design which allows easy mounting. Upper and lower limit switches. Double safety brake device including an electromagnetic brake for instant braking. Operates on single phase 115 volt power supply. Hand held control pendant with safety switch. 13" Housing length. 2-1/4" Hanger opening. 4-1/2" Hanger width. 7/8" Hook opening. 500 Pounds capacity. 75 fpm Line speed. 90 feet Standard lift. 23 feet Pendant length. 16 feet Power cord length. 3/16" Rope size. Measures 7-1/32" length by 9-7/16" width by 25-59/64" height.

  • Color: Yellow
  • Brand: OZ Lifting
  • ASIN: B006P6OCVQ

Harrington Mini Cat AH Cord Model Air-Powered Hoist, Hook Mount, 1/4 Ton Capacity, 20' Lift, 32 fpm Max Lift Speed, 12" Headroom, 0.9" Hook Opening, 3/8" NPT, 90 psi

Harrington Mini Cat AH Cord Model Air-Powered Hoist,

The Harrington Mini-Cat AH is an air-powered hoist with a hook mount, cord control that allows the operator to stay in reach of the load, low headroom design, and unlimited duty cycle for continuous operation in high-volume production environments. It has a spring-loaded, eight-vane motor to facilitate air feathering control for precise load handling and gentle load placement. This hoist has an average decibel rating (dBA) of 80dBA, measured at a distance of three feet from the exhaust manifold, for comfortable noise levels. It also has an aluminum valve section and a nickel plated load chain for resistance to corrosion, abrasion, and wear. The Harrington Mini-Cat AH air hoist is typically used in high-production manufacturing or construction environments that require continuous operation in areas such as assembly lines or workstation operations, but also may be used for similar applications in other industries. This hoist is produced to comply with American Society for Mechanical Engineers (ASME) B30.16 and ASME HST-5M standards. When used according to manufacturer’s recommendations, this product is covered by a one-year warranty from date of shipment against defects in workmanship or materials. Hoists are devices that use relatively small amounts of force to lift, lower, an...

  • Brand: Harrington
  • ASIN: B0044WW57Q

CM ShopStar Electric Chain Hoist, Single Phase, Hook Mount, 1/2 Ton Capacity, 10' Lift, 6 fpm Max Lift Speed, 0.167 HP, 7/8" Hook Opening, 115V

CM ShopStar Electric Chain Hoist, Single Phase, Hook

H4 duty cycle (300 motor starts/hour). Easy installation and maintenance. Standard protector overload device. 10 pocket oblique lay liftwheel provides longer chain wear. Epoxy powder coat finish. 6-1/2' Power cord with molded 3 prong plug on 115 volt units. NEMA 4 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM hoist alloy load chain thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Small, compact design for commercial and industrial applications. Rigid hook suspension prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360 degree. Totally enclosed non-ventilated hoist frame protects motor from environmental contamination. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. Made in U.S.A. 1000 lbs capacity, 10' lift height, ShopStar hoist model, 6 FPM lifting speed, 11-15/16" headroom, 115-1-60 power supply, 1 Speed control, no limit switches, hook mounting.

  • Brand: CM Shopstar
  • ASIN: B004CFBDJG
  • UPC: 043927621095

Vestil VS-ECH-5-1PH Variable Speed Electric Chain Hoist, Single Phase, Hook Mount, 1/4 Ton Capacity, 13' Lift, 49 fpm Max Lift Speed, 220V

Vestil VS-ECH-5-1PH Variable Speed Electric Chain Hoist, Single

The Vestil VS-ECH variable speed electric chain hoist is an electric power hoist with a hook mount, single phase motor, and infinitely adjustable speed from zero to 49 feet per minute (FPM) to facilitate control of the lift operation. The hand control on this hoist has a speed knob and individual up/down push buttons to help facilitate ease of use. This hoist has an auto brake designed to hold load in event of power loss for added safety, and a chain container that holds slack load chain during operation. Hoists are devices that use relatively small amounts of force to lift and lower heavy loads. Power hoists transfer a small motor-generated force across a series of gears that multiply the force into one large enough to lift the designated load. Their lifting mechanisms consist of a motor; drive shaft and gear set; and a chain, rope, or wire, with a hook attached to it for lifting loads. Hoists are commonly suspended from structures by hook or trolley mounts, and are used in a variety of industries such as transportation, construction, manufacturing, mining, and material handling. Load capacity is the maximum rated load a hoist can handle. While manufacturers may indicate they have tested a hoist beyond its limits, operators should never attempt to lift a load heavier than the...

  • Brand: Vestil
  • ASIN: B0054M1K8K

CM ShopStar Electric Chain Hoist, Single Phase, Hook Mount, 600 lbs Capacity, 10' Lift, 8 fpm Max Lift Speed, 0.167 HP, 7/8" Hook Opening, 115V

CM ShopStar Electric Chain Hoist, Single Phase, Hook

H4 duty cycle (300 motor starts/hour). Easy installation and maintenance. Standard protector overload device. 10 pocket oblique lay liftwheel provides longer chain wear. Epoxy powder coat finish. 6-1/2' Power cord with molded 3 prong plug on 115 volt units. NEMA 4 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM hoist alloy load chain. Thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Small, compact design for commercial and industrial applications. Rigid hook suspension prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360 degree. Totally enclosed non-ventilated hoist frame protects motor from environmental contamination. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. 600 lbs capacity, 10' lift height, ShopStar hoist model. 11-15/16" headroom, 115-1-60 power supply, 1 speed control, no limit switches, hook mounting.

  • Brand: CM Shopstar
  • ASIN: B004CFBEEK
  • UPC: 043927620487

CM Valuestar Electric Chain Hoist, Single Phase, Hook Mount, 1 Ton Capacity, 10' Lift, 8 fpm Max Lift Speed, 1-1/8" Hook Opening, 115V

CM Valuestar Electric Chain Hoist, Single Phase, Hook

For general commercial applications. Hook suspension (not included). Maximum 8.0 feet per minute lifting speed. 115.00 volts voltage. Single phase. 60.0 Hz frequency. 5 feet cord length. Electric power source. Comes in standard pack.

  • Brand: Cm Valuestar
  • ASIN: B001HWCKIU
  • UPC: 043927624058

Harrington NER Single Speed Electric Chain Hoist, Three Phase, Hook Mount, 2 Ton Capacity, 20' Lift, 14 fpm Max Lift Speed, 2.4 HP, 22.6" Headroom, 1.6" Hook Opening, 208/230/460V

Harrington NER Single Speed Electric Chain Hoist, Three

The Harrington NER single speed electric chain hoist with hook mount operates on three phase power and has a compact aluminum body with low headroom; and a fan-cooled motor with a 60-minute short term duty rating and an American Society for Mechanical Engineers (ASME) H4 rating for heavy duty work. The body housing on this hoist is sealed for protection from dirt, moisture, and harsh environmental conditions. This hoist has a standard count hour meter that tracks “lowering starts” and “on time” to help facilitate timely maintenance. The Harrington NER single speed electric chain hoist has a direct current (DC) electromagnetic brake that does not release unless the motor is energized. This hoist has a load sheave with deep-groove pockets to support the load chain, and help reduce vibration and chain wear; a chain guide made of heavy cast iron for durability, which can be removed without disassembly; and a grade 80 nickel-plated, heat-treated load chain for resistance to wear. The mount and load hooks are made of forged carbon steel and designed to resist fracture under stress, and the load hook swivels 360 degrees. It also has a friction clutch with carbon friction material for consistent hoist performance over the recommended temperature range of -4 degrees F to 104 degr...

  • Brand: Harrington
  • ASIN: B0044WW4Z4

CM Shopstar Electric Chain Hoist, Three Phase, Hook Mount, 250 lbs Capacity, 10' Lift, 16 fpm Max Lift Speed, 0.167 HP, 7/8" Hook Opening, 230V

CM Shopstar Electric Chain Hoist, Three Phase, Hook

H4 duty cycle (300 motor starts/hour). Easy installation and maintenance. Standard protector overload device. 10 pocket oblique lay liftwheel provides longer chain wear. Epoxy powder coat finish. 6-1/2' Power cord with molded 3 prong plug on 115 volt units. NEMA 4 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM hoist alloy load chain. Thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Small, compact design for commercial and industrial applications. Rigid hook suspension prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360 degree. Totally enclosed non-ventilated hoist frame protects motor from environmental contamination. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. 250 lbs capacity, 10' lift height, ShopStar hoist model. 11-1/16" headroom, 230-3-60 power supply, 1 speed control, no limit switches, hook mounting.

  • Brand: CM Shopstar
  • ASIN: B001D0887I
  • UPC: 043927620715

Harrington NER Single Speed Electric Chain Hoist, Three Phase, Hook Mount, 3 Ton Capacity, 20' Lift, 17 fpm Max Lift Speed, 3.8 HP, 32.9" Headroom, 1.8" Hook Opening, 208/230/460V

Harrington NER Single Speed Electric Chain Hoist, Three

The Harrington NER single speed electric chain hoist with hook mount operates on three phase power and has a compact aluminum body with low headroom; and a fan-cooled motor with a 60-minute short term duty rating and an American Society for Mechanical Engineers (ASME) H4 rating for heavy duty work. The body housing on this hoist is sealed for protection from dirt, moisture, and harsh environmental conditions. This hoist has a standard count hour meter that tracks “lowering starts” and “on time” to help facilitate timely maintenance. The Harrington NER single speed electric chain hoist has a direct current (DC) electromagnetic brake that does not release unless the motor is energized. This hoist has a load sheave with deep-groove pockets to support the load chain, and help reduce vibration and chain wear; a chain guide made of heavy cast iron for durability, which can be removed without disassembly; and a grade 80 nickel-plated, heat-treated load chain for resistance to wear. The mount and load hooks are made of forged carbon steel and designed to resist fracture under stress, and the load hook swivels 360 degrees. It also has a friction clutch with carbon friction material for consistent hoist performance over the recommended temperature range of -4 degrees F to 104 degr...

  • Brand: Harrington
  • ASIN: B0044WW530

Vestil MINI-4 Mini Cable Hoist, Single Line Uniform Capacity: 400 lbs., Double Uniform Line Capacity: 800 lbs., 30 fpm Max Lift Speed, 115V

Vestil MINI-4 Mini Cable Hoist, Single Line Uniform

The Vestil MINI electric cable hoist is a power hoist , an electric motor for use with 115V AC sources, and a compact design for mobility. This hoist can be used in a single line cable configuration with 36 ft. length for greater lifting or pulling distance, or in a double line cable configuration with 18 ft. length for added load capacity. This hoist has a push button hand control to facilitate ease of use. Hoists are devices that use relatively small amounts of force to lift and lower heavy loads. Power hoists transfer a small motor-generated force across a series of gears that multiply the force into one large enough to lift the designated load. Their lifting mechanisms consist of a motor; drive shaft and gear set; and a chain, rope, or wire, with a hook attached to it for lifting loads. Hoists are commonly suspended from structures by hook or trolley mounts, and are used in a variety of industries such as transportation, construction, manufacturing, mining, and material handling. Load capacity is the maximum rated load a hoist can handle. While manufacturers may indicate they have tested a hoist beyond its limits, operators should never attempt to lift a load heavier than the maximum rated load. Lifting speed describes, in feet per minute (fpm), how quickly the hoist can ...

  • Brand: Vestil
  • ASIN: B0054M35PG

CM ShopStar Electric Chain Hoist, Single Phase, Hook Mount, 1/4 Ton Capacity, 12' Lift, 8 fpm Max Lift Speed, 0.167 HP, 7/8" Hook Opening, 115V

CM ShopStar Electric Chain Hoist, Single Phase, Hook

H4 duty cycle (300 motor starts/hour). Easy installation and maintenance. Standard protector overload device. 10 pocket oblique lay liftwheel provides longer chain wear. Epoxy powder coat finish. 6-1/2' Power cord with molded 3 prong plug on 115 volt units. NEMA 4 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM hoist alloy load chain. Thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Small, compact design for commercial and industrial applications. Rigid hook suspension prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360 degree. Totally enclosed non-ventilated hoist frame protects motor from environmental contamination. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. 500 lbs capacity, 10' lift height, ShopStar hoist model. 11-15/16" headroom, 115-1-60 power supply, 1 speed control, no limit switches, hook mounting.

  • Brand: CM Shopstar
  • ASIN: B004CFBEC2
  • UPC: 043927620944

Powerwinch 712 Trailer Winch (40' x 7/32" Cable)

Powerwinch 712 Trailer Winch (40' x 7/32"

  • Brand: Powerwinch
  • ASIN: B001PGWXZS
  • UPC: 033936777128
Similar Fpm Max Lift Results