Mopar P5155513 Crate Engine

Mopar P5155513 Crate

Mopar's newest crate engine pays homage to its legendary roots in this all new aluminum Gen III HEMI. At 540 horsepower and 530 feet-pound of torque (SAE J1349), this HEMI is a real beast. 426 cubic-inches in a HEMI Gen III Siamese-Bore Block (P5155507). All Aluminum Cylinder Heads and Engine Block (4.0 inch Stroke X 4.125 inch Bore). Over 500 Horsepower and 500 pound feet Torque. Forged Crankshaft, Connecting Rods and Pistons. 8620 HR billet steel main caps with 6-bolt (# 2/3/4) and 4-bolt (# 1/5) caps to beef-up the bottom end for severe performance applications. All HEMI Gen III dress items fit (front cover, oil pan, oil filter mounting, Front End Accessory Drive (FEAD) etc.). Includes attachments for a front motor plate.

  • Brand: Mopar
  • ASIN: B004TBNATO

PROFessional Powertrain DDF3 Chrysler 5.7L Hemi Engine, Remanufactured

PROFessional Powertrain DDF3 Chrysler 5.7L Hemi Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXA24W
  • UPC: 653517145278

PROFessional Powertrain DDH9 Chrysler 5.7L Hemi Engine, Remanufactured

PROFessional Powertrain DDH9 Chrysler 5.7L Hemi Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXAKR6
  • UPC: 653517172489

PROFessional Powertrain DDH8 Chrysler 5.7L Hemi Engine, Remanufactured

PROFessional Powertrain DDH8 Chrysler 5.7L Hemi Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXAKSK
  • UPC: 653517172458

PROFessional Powertrain DDK1 Chrysler 5.7L Hemi Engine, Remanufactured

PROFessional Powertrain DDK1 Chrysler 5.7L Hemi Engine,

This engine is remanufactured using the most technically advanced methods - incorporating both CNC machining and DC torque equipment. All components are inspected to assure viability and then verified by Quality Control Personnel. All sub-assemblies and components are both pressure and vacuum tested prior to being installed. Once assembled, state of the art computer controlled pressure testing is performed as a final verification of casting integrity. Final testing is done with our proprietary “ProTester Max” at 600 RPM. If applicable both VVT (Variable Valve Timing) and DOD (Displacement on Demand) units are physically operated and 100% confirmed. Compression, oil pressure, oil flow and four, ninety degree stop and match readings are verified to assure your engine will meet or exceed your expectations. Fluorescent dye within the testing oil is used as a countermeasure to find any possible oil leaks, including the crankshaft rear seal. This state of the art testing far surpasses a “hot fire” engine. Engines come as long block assemblies that ship with a finishing gasket set and a new oil pump. We consider it a privilege to provide you with engine assemblies that we remanufacture with PRIDE!

  • Brand: PROFormance Powertrain
  • ASIN: B007CXANTQ
  • UPC: 653517196676

2x (pair/set) VMS Racing 426 BLACK on SILVER Highly Polished Aluminum EMBLEMS

2x (pair/set) VMS Racing 426 BLACK on SILVER

Emblems are Approx. 5.5" inches x Height 1.13" inches [139.7mm x 28.7 mm]. The emblems are made of high-quality, aircraft aluminum and hard-anodized finish for a long-lasting result. They come with self-adhesive 3M tape for easy, simple installation. They can be installed in ANY smooth surface inside or outside any vehicle. Imported from Japan. You can install these emblems on the trunk, fenders, interior console, etc. *Note: Some emblems also look great on cell phones, laptops and computers. **Note: Surface must be clean and dry prior to adhering. ***NOTE: Please Note that these are NOT the cheap Vinyl and Decal Emblems sold all by most on the Internet. The Emblem is made of high quality ALUMINUM and is noticeably different.

  • Brand: VMS Racing
  • ASIN: B01G7APCJ0
  • UPC: 746839060296

Genuine GM (10067353) 350ci / 5.7L Gen 0 Engine

Genuine GM (10067353) 350ci / 5.7L Gen 0

These are excellent entry-level performance engines for older cars, trucks, and street rods. All of the parts in these engines are brand new. These Chevrolet Performance Good wrench 5.7L/350 child. engines have approximately 8.5:1 compression with an base horsepower rating of 195 horsepower and capable of up to 260 horsepower depending on intake and injection setup. These crate engines have a 4.00 inch bore and a 3.47 inch stroke with 4-bolt mains and 2-piece rear main seals. Camshaft specifications are .383 inch intake lift and .401 inch exhaust lift. The open duration is 194 degrees intake and 202 degrees exhaust at .050 inch with a 112 degree lobe separation. The cylinder heads are cast iron with 1.94 inch intake valves and 1.50 inch exhaust valves, 76 cubic capacity combustion chambers, and 7-bolt style exhaust flanges. These engines include painted valve covers, oil pans, and timing covers. They are drilled for both left hand and right hand dipsticks.

  • Color: Black
  • Brand: GM Performance Parts
  • ASIN: B00CFH2S5Q

Liberty Classics 84028 Multi 1: 6 Engine - HEMI Dragster

Liberty Classics 84028 Multi 1: 6 Engine -

Bring on home this amazing collection. These are true-to-scale null die cast cars with an amazing detailed finish. The models are made with top quality materials made to last. All Car models are authentic licensed products. Enjoy this null in your collection

  • Color: Multi
  • Brand: Liberty Classics
  • ASIN: B000EFHO6O
  • UPC: 885361369672

Ignition Coil Pack Set of 8-5.7L V8 Hemi - Fits 2005 Chrysler 300, 04-05 Dodge Durango, 2005 Magnum, 03-05 Dodge Ram, 2005 Jeep Grand Cherokee - Replaces 56028394AB, UF378, IC508, C1414, 56028394AC

Ignition Coil Pack Set of 8-5.7L V8 Hemi

If your Dodge, Chrysler, or Jeep has begun to misfire, idle erratically, or hesitate under acceleration a bad coil pack could be to blame. By providing the proper spark to the spark plug all of these running issues can be resolved. This AA Ignition Coil Pack is a direct replacement for the factory coil. Made by an original equipment supplier (OEM) these coil packs surpass the factory quality and will get your engine running how it should be; smooth and fast. This Ignition Coil Pack fits the following Models: 2005 Chrysler 300 5.7L V8 2004-2005 Dodge Durango 5.7L V8 2005 Dodge Magnum 5.7L V8 2003-2005 Dodge Ram 1500 5.7L V8 2003-2005 Dodge Ram 2500 5.7L V8 2003-2005 Dodge Ram 3500 5.7L V8 2005 Jeep Grand Cherokee 5.7L V8 Replaces the following part numbers: 56028394AB, 56028394AC, 56028394AD, 52-1758 ACDelco C648 Complete set of 8 ignition coils. Manufactured by AA Ignition, exceeds the factory specification, and carries a 24 month or 24,000 mile warranty. The terms ACDelco, Dodge, Chrysler, & Jeep are used in this listing only to identify the vehicles this ignition coil fits.

  • Brand: AA Ignition
  • ASIN: B01N483NQ5

Liberty Classics 84023 Multi Hemi 426 Engine

Liberty Classics 84023 Multi Hemi 426

This is a highly detailed 1/6 scale die cast metal replica of the famous Chrysler Hemi 426 engine. This officially licensed item features a die cast engine block with plastic injected molding accessories. It features a starter motor gear, which drives the flywheel gear, which turns the fan, the fan pulleys, belts, alternator and power steering pump. The real chrome-plated air cleaner is removable to reveal highly detailed carburetors.

  • Color: Multi
  • Brand: Liberty Classics
  • ASIN: B000B1QY62
  • UPC: 792463331547

Mopar P5155189 Crate Engine Drag Pack

Mopar P5155189 Crate Engine Drag

Crate Engine, 6.1L HEMI, EFI, Drag Pak.

  • Brand: Mopar
  • ASIN: B00MEM8TF0

Edelbrock 1530 SUPERCHARGER

Edelbrock 1530

Does your HEMI(R) need more power? Then get an Edelbrock E-Force Supercharger system - the most efficient supercharger on the market for the Chrysler 300, Challenger, Charger, Magnum and Ram that's equipped with a 5.7L, 6.1L or 6.4L HEMI engine. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the Supercharger for optimal flow. They also include individual 7" long intake runners that allow for maximum low end torque and great drivability. * aLL 2015-Later Chrysler/Dodge Supercharger Systems WILL REQUIRE the ECM to be sent in for modification... NO HANDHELD PROGRAMMER INCLUDED. This is an 8-10 day process/waiting period from the time they are received! * Supercharger systems without tunes are not eligible for supplemental warranty. Supercharger systems sold without tunes are only emissions legal when used with the correct Edelbrock tune, which can be downloaded on the supercharger tech support.

  • Brand: Edelbrock
  • ASIN: B006MRF76C
  • UPC: 085347015306

Master Engine Rebuild Kit FITS: 2003-2008 Dodge Ram Durango 5.7L V8 HEMI Vin D

Master Engine Rebuild Kit FITS: 2003-2008 Dodge Ram

Thank you for your order. These kits consist of many different parts so sometimes we do have to ship them in multiple packages. We will always try to let you know if that is the case. If you end up needing a different size part than you ordered, we can always do an exchange. Do not open a return, just send a message letting us know what you would like to exchange and we will get you taken care of. Also, when you get your kit and there are ANY issues, please send us a message with details and a call-back phone number, and we can usually get everything solved quickly. Mistakes do happen and we pride ourselves on being able to fix them quickly. THANKS!

  • Brand: Enginetech
  • ASIN: B07D7S7BMY
  • UPC: 707473070683

345 5.7 Liter High Performance Engine Emblems in Chrome & Red Trim - 4" Long Pair

345 5.7 Liter High Performance Engine Emblems in

Adhesive-backed for quick and easy installation. Measures 4" x 1.5". Red and chrome finish. Sold as a pair

  • Color: Chrome Red
  • Brand: Yates Performance
  • ASIN: B017XWBSIK

Red Line (60103) Complete SI-1 Fuel System Cleaner - 15 Ounce

Red Line (60103) Complete SI-1 Fuel System Cleaner

Concentrated, detergent-based fuel additive cleans injectors, carburetors, valves and combustion chamber deposits with a concentrated blend of the most powerful high-temp and low-temp detergents available.

  • Brand: Red Line
  • ASIN: B000CPI5Z0
  • UPC: 083522601030
Similar Hemi Crate Engine Results