BBK 5004 Compatible with Chevrolet GM LS1 High Performance SSI Series Intake Manifold - Titanium Silver Powder Coat Finish

BBK 5004 Compatible with Chevrolet GM LS1 High

BBK Titanium Silver Powder Coat SSI Intake Manifold for GM LS-1 is an improvement over the factory Z06 Corvette intake manifold. The BBK engineers have designed a unit that delivers 12-15 additional rear wheel horsepower on the already hot Z06 and 18-24 horsepower on the base LS-1 equipped GM models. Such highlights include a standard 85 millimeter straight through design throttle inlet and low restrictive rounded runners for maximum horsepower as well as improved low end torque for great street or strip performance. For additional power gains and value there is also an intake manifold kit with one of BBK 's popular Power Plus series performance throttle bodies.

  • Color: Titanium Silver
  • Brand: BBK Performance
  • UPC: 197975050045

Skunk 2 307050270 Intake Manifold for Integra 94-01

Skunk 2 307050270 Intake Manifold for Integra

More than a decade ago, Skunk2's engineers looked to the popular Integra Type R intake manifold for inspiration and went back to the drawing board. Skunk2's Pro Series Intake Manifold for Hondas B-series VTEC engines (GS-R only) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the "street enthusiast" who wants more power but doesn't want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains. Skunk2's cast-aluminum Pro Series Intake Manifolds for Honda's B-series engines are a direct-fit replacement for all B-series engines thanks to three separate flange designs and are compatible with all factory sensors and throttle bodies as large as 75mm. Pro Series Intake Manifolds offer horsepower and torque gains greater than competitors' manifolds but without compromising mid-range power output. The design incorporates specially tapered runners as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate ...

  • Color: Cast Aluminum
  • Brand: Skunk2 Racing
  • ASIN: B000G0T1V8
  • UPC: 873265000432

Edelbrock 2101 INTAKE MANIFOLD

Edelbrock 2101 INTAKE

The Edelbrock Performer EGR (Electronic Gas Recirculation) Intake Manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This patented design greatly improves torque over a wide RPM range for excellent throttle response, especially off-idle through the mid-range. The intake manifold directs the air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The flow typically proceeds from the throttle body into a chamber called the plenum, which in turn feeds individual tubes, called runners, leading to each intake port. It accepts late model water neck, air-conditioning, alternator and H. E. I. (Heat Energy Ignition).

  • Brand: Edelbrock
  • ASIN: B000182BA8
  • UPC: 085347021017

Speedmaster PCE147.1040 Shootout Series High Rise Intake Manifold

Speedmaster PCE147.1040 Shootout Series High Rise Intake

Shootout Series High Rise Intake Manifold Big Block Chevy 454Height: 6.060"Non-EGRRPM Range: 3000-75004150 FlangeOval PortSatin Finish Notes: Check hood clearance before installingWill not fit stock Corvette hoodsNot for tall deck applications

  • Brand: Speedmaster
  • UPC: 012933009739

Procomp Electronics PCE147.1052 Shootout Intake Manifolds, Carbureted

Procomp Electronics PCE147.1052 Shootout Intake Manifolds,

Shootout Series High Rise Intake Manifold Small Block Ford 351W Windsor Height: 5.680"Non-EGRRPM Range: 3500-8000Satin Finish

  • Brand: Speedmaster
  • ASIN: B00SY03IUC
  • UPC: 012933009784



Founded in 2003, BLOX Racing is a relative newcomer to the import and sport compact aftermarket. However, in its short time it has quickly established a foothold in the marketplace and developed a reputation as a high quality aftermarket parts manufacturer.

  • Brand: Blox Racing
  • ASIN: B007ZDR22O
  • UPC: 608067824067

Edelbrock 5001 INTAKE MANIFOLD

Edelbrock 5001 INTAKE

The Edelbrock Torker II Intake Manifold is a low rise, single plane manifold that works well where hood clearance is limited. These manifolds work well in high RPM, high performance street applications. They produce gains in top-end horsepower and throttle response. Not intended for mileage or emissions applications, they are only for high performance vehicles.

  • Brand: Edelbrock
  • ASIN: B000630IBW
  • UPC: 085347050017

AutoLine Pro EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester - Shop Series - Compact

AutoLine Pro EVAP Vacuum Automotive Smoke Machine Leak

The AutoLine Pro - Shop Series - Compact Automotive Smoke Tester is smaller than its older brother, the SS-Standard, and lacks a flow control lever. However, it's capable of outputting excellent amounts of smoke consistently and is designed for mechanics who desire outstanding form, versatility, and function in their tools. Equipped with a Ceramic Smoke Coil that lasts a lifetime.Diagnose leaks in minutes with smoke detection technology!Consistently test: EVAP systems, Vacuum leaks, low pressure Turbo leaks, Intake Manifolds, Cooling/EGR/Exhaust Systems, worn rubber, gaskets, seals, connectors, and much more! Features● Accurately dialed and locked to 1 PSI smoke output, a safe pressure for testing any automotive system● Tapered smoke injection nozzle fits into virtually all hoses and lines● EVAP Service kit included!● Approved Smoke Fluid included! Lasts 100+ tests● Shop hook for hanging on vehicle hood or shelves● Detachable Power Cables How does it work?(1) Charge up with the included OEM approved smoke fluid(2) Fasten the power cables(3) Connect your air supplyCheck for LEAKS with smoke detection technology! What's Included●SS-Compact Smoke Machine●Approved Smoke Fluid●Smoke injection nozzles●EVAP Service Port Adapter kit●Power Cables●Instruction Manual...

  • Brand: AutoLine Pro
  • ASIN: B07JVT1NG2
  • UPC: 605620262830

Vincos Universal 3/8"&9/16" 400ml Aluminum Oil Catch Can Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit with Breather Black Small Drain

Vincos Universal 3/8"&9/16" 400ml Aluminum Oil Catch Can

Specifications: Material: Aluminum Canister Dimensions: 5" Height x 3.25" Diameter Inlet / Outlet Diameter: 3/8" & 9/16" Hose Adapters Placement on Vehicle: Front, Left, Right Warranty: One year unlimited miles Package Includes: 1 x Oil Catch Can 1 x Air Filter 1x Hose Accessories as Shown in the Picture Feature This is brand new high quality construction oil catch can & accessories and well packed in box. Using high-quality materials to ensure reliability and durability of product. Easy to clean, empty and maintain, visual fluid level shows when to empty the catch tank It will remove carbon and sludge build-up in the intake system, prolong engine longevity, increase engine performance.

  • Color: Universal Oil Catch Can
  • Brand: Vincos
  • ASIN: B076BKV7JF

Skunk2 (372-05-0275) Thermal Intake Manifold Gasket for Honda D-Series Engine

Skunk2 (372-05-0275) Thermal Intake Manifold Gasket for Honda

Skunk2's advanced high temperature thermal polymer material protects against heat soak and maximizes horsepower gains by reducing heat transfer.

  • Brand: Skunk2 Racing
  • UPC: 873265007943
Similar High Performance Series Intake Manifold Results