Hole Pro X-230+ 1-7/8" to 9-1/4" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades

Hole Pro X-230+ 1-7/8" to 9-1/4" TWIN BLADE

ADJUSTABLE TWIN BLADE hole cutter kit with infinite adjustment 1-7/8" to 9-1/4" for faster cutting for recessed lights, ceiling speakers, ducts with perfect balanceOne hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.Uses 7mm pilot bit, Hole Pro SKU HP1197.Tough 11-1/4" OD ABS Shield - Needs 1/2" drill chuck - Take a quarter the power of hole saws so bigger holes easily cut High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth replaced in seconds Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides NO NEED for BALANCE BARS as with SINGLE BLADE models that can break off INCLUDES -Pro grade adjustable hole cutter-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap all dust and shavings-Sturdy Carry Case -Replaceable blades and Pilot Bit - narrow kerf High Speed Steel for wood, plastics, acoustic tile, tongue & groove, laminates, rubber and Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, OSB, plywood, MDF-hex wrenches The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings. Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint existsCut holes in ply...

  • Brand: Hole Pro
  • ASIN: B001PI8S6O
  • UPC: 813147010456

Hole Pro X-305 1-7/8" to 12" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades

Hole Pro X-305 1-7/8" to 12" TWIN BLADE

Adjustable hole cutter kitOne hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.Twin blades with infinite adjustment 1-7/8" to 12" for faster cutting of recessed light cans and most ceiling speakers with perfect balance. Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides No need for balance bars which can break off Kit includes -Pro grade adjustable hole cutter-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings-Sturdy Carry Case -Replaceable blade sets of BOTH HSS (located in the upper right hand corner of the carry case) for wood, plastics, acoustic tile, tongue & groove, laminates, rubber AND TUNGSTEN CARBIDE blades (installed in the hole cutter) for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF-hex wrenches The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings. Please visit www.holepro.com for product videos and details about our products. Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint existsCut holes in plywood up to 8" in diameter with 18 volt cordless drill Like all Hole Pro Power Series kits the safety dust shield (14" OD) can be used ...

  • Brand: Hole Pro
  • ASIN: B006ERSKJG
  • UPC: 813147010029

HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use ¼ Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER

HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable

Do NOT USE with STUD or HAMMER DRILLS Replaceable HSS bladesDRILL NOT INCLUDED, NOT FOR PLASTER, OR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDFGreat for DIYer cutting holes in soft sheetrock for recessed light cans and speakers. Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal.High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile. Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches.Make sure to measure the CUTOUT for the product (speaker, recessed light) .INSTRUCTIONS: Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths. ABS shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield. Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling.Uses 1/4" pilot bit.Unlike single blade adjustable hole cutters there...

  • Brand: Hole Pro
  • ASIN: B012U1VVD6
  • UPC: 813147010555

Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game/Carbon Steel & BI-Metal Heavy Duty Steel (Blue)

Eliseo 6 inch 152 mm Hole Saw Blade

Eliseo 6 inches Hole Saw for Corn Hole Drilling Material: Carbon Steel, Durable and no Rust Package: 1 pack 6-inch hole saw 1 pack hex shank drill bit adapter It is OK for drilling as clockwise rotation, but not anti-clockwise.

  • Color: Blue 152mm
  • Brand: Eliseo
  • ASIN: B07BF69BD6
  • UPC: 666354431787

Eliseo 6 inch 152 mm Hole Saw Blade for Cornhole Boards/Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game/Carbon Steel & BI-Metal Heavy Duty Steel(Red)

Eliseo 6 inch 152 mm Hole Saw Blade

Eliseo 6 inches Hole Saw for Corn Hole Drilling Material: Carbon Steel, Durable and no Rust Package: 1 pack 152mm (6-inch) hole saw 1 pack hex shank drill bit adapter It is OK for drilling as clockwise rotation, but not anti-clockwise.

  • Color: Red 152mm
  • Brand: Eliseo
  • ASIN: B079N6KW2P

General Tools & Instruments 55 BLADE Replacement Blade for No. 55 Circle Cutter

General Tools & Instruments 55 BLADE Replacement Blade

Deep cut blades at 60-degree angle for use in craft machines. Replacement blades work with: Bridge, Circuit, Circuit Explore, Refine, Roland, Silhouette machines Includes: 6 - Deep Cut Blades. These blades are carbide treated giving it extra-long lasting blade edge. -Use to cut media like card stock with the Deep Cut Blades. - IF TEARING OR NOT EXACT corners or fine detail is not able to be cut this is usually NOT THE CAUSE OF A DULL BLADE but rather the use of the wrong blade angle for the media desired. Too often people blame a blade for being dull when if a proper angle blade is used with the desired media this would eliminate the problem in 90% of the situations. This is most always true with the carbide hardening process used on our blades as they are very durable compared to a standard blade metal. -The length of the blade is NO FACTOR; different makers use different length front edge. THE ONLY part of the blade that contacts the media is the angle tip. Deep cut is always 60 degrees; Standard is always 45 degrees. Do not be confused by a longer front edge as it will never touch what your cutting. -Media and blade choice: Blade angle is not how much metal blade is showing or how thick or long the shaft is. None of that actually comes in contact with the media it is cutting. ...

  • Brand: General Tools
  • ASIN: B0008DJIPW
  • UPC: 038728270153

Hole Saw Kit, EONLION 16 Pieces 3/4 inches-5 inches Set in Case with Mandrels, Super Sharp Saw blade, Install Plate and Hex Key for Sawing Holes in Normal Wood, Plywood, Drywall, PVC and Plastic Plate

Hole Saw Kit, EONLION 16 Pieces 3/4 inches-5

Determination and Focus Make EONLION Focus shapes our profession. EONLION concentrates on the tool development and perseveres in improving our all products. At EONLION, we cares about the opinions from all users, we aim to serve our consumers to live a more convenient, colorful life. Therefore new and delicate products need your opinions to be launched and optimized. With any problems you can contact us freely EONLION Professional Hole Saw Kit Our hole saw features a carbon steel material, heat treated progress, reinforced shoulder for added strength and longer life. EONLION Hole Saw Kit is suitable for the most popular size of Multipurpose, great for tasks Including not limited to thin PVC board, plastic, ordinary wood. Like cutting holes in desk for cables, drywall for wire and cable, and in doors for fitting handles and locks. 12 Hole Saws  3/4 " (19mm),  7/8" (22mm),  1-1/8" (28mm),  1-1/4" (32mm),  1-1/2" (38mm),  1-3/4" (44mm)  2" (51mm),  2-1/2" (64mm),  3" (76mm),  3-1/2" (89mm),  4" (102mm),  5" (127mm) Standard Arbor - makes hole saws work Drill Bit - drill relief holes, makes hole cutting easier and more accurate Hex Key - Saw installation/ disassembly, adjust the tightness Install Plate - Easy to set up Note: 1.Hating to use a hole saw being slow, dulls q...

  • Brand: EONLION
  • ASIN: B07FVN82B2
  • UPC: 720355262341

6 Inch Hole Saw for Making Cornhole Boards - Heavy Duty Steel - Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game

6 Inch Hole Saw for Making Cornhole Boards

It is a premium construction grade tool that cuts perfect 6" diameter holes.Built tough for repeat use.The bit universally attaches to any 1/2" drill and has a blade depth of 7/8" inch.  Package Included:1 * 6" hole saw1 * mandrel and drill bit

  • Brand: HYSHIER
  • ASIN: B07CGQ1B4B
  • UPC: 799899468151

Qbit SQ1000-S Power Oscillating Multi-Tool Blade Saw for Single Gang Outlet Box

Qbit SQ1000-S Power Oscillating Multi-Tool Blade Saw for

QBit SQ1000-S Outlet Box Saw Blade for Oscillating Power Multi-Tools to Cut-in Single Gang Wall Boxes ------ Are you tired of over cutting your drywall using a reciprocating or drywall saw? ------ Are you looking for a better way to make Single-Gang cut-outs for retrofit wall boxes? The SQ1000-S will Cut-in exact rectangular-holes in seconds. --- If your job requires you to cut-in wall boxes in drywall, the QBit is for you. --- Fits on virtually all Oscillating Power Multi-Tools and turns it into a hole making machine! --- Unlike a drywall saw which leaves unsightly ragged edges, the QBit makes a perfect hole every-time and it does so quick and efficiently! American Engineered & Made in the USA. We highly recommend that you invest in this tool! ------ PERFECT FOR: Anyone who needs to make single gang rectangular-holes in drywall for wall boxes, including: High and Low-Voltage Tech - electricians, telephone, data, alarm/security, CCTV/IP-camera, antenna, cable, dish, home-theater, automation, HAVC, Drywall Contractor/Installer, Etc.------ *NOTE: QBit was designed to fit all popular Oscillating Tool such as DeWalt, Milwaukee, Bosch, Fein, etc. If your Multi-Tool has a different connection type on it, Bosch makes a little adapter (OIS001B) for less than $4 that allows you to adapt t...

  • Color: Black
  • Brand: Qbit
  • ASIN: B01GKKE2W0
  • UPC: 857842006000

Acrux7 Diamond Hole Saw Cutter Kit, 15pcs Hollow Drill Bit Set Diam Range 6-50mm (1/4-2inch), Electric Holesaw Blades Cutting for Porcelain Tile, Ceramic, Glass

Acrux7 Diamond Hole Saw Cutter Kit, 15pcs Hollow

Acrux7 Diamond Hole Drill Bits Kit - 15 pcs set ★Material: Carbon steel electroplated with nickel. ★Hole Saw Cutter Blade Bound: High quality diamond sand. ★15 pcs set, Diam: 6mm(1/4"), 8mm(5/16"), 10mm(3/8"), 12mm(1/2"), 14mm(9/16"), 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 26mm(1-1/32"), 28mm(1-3/32"), 30mm(1-1/8"), 40mm(1-1/2"), 50mm(2"). ★Attention: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably. ★Application: Drilling round hole for Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic and so on. It is excellent for making clean and accurate hole on glass and tile. Not for use on Concrete or for depths beyond about 1/2".

  • Brand: Acrux7
  • ASIN: B0785MTBYB
  • UPC: 657008530703

Qbit SQ1000-S-LV Power Oscillating Multi-Tool Blade Saw for Low-Voltage Single Gang Outlet Box

Qbit SQ1000-S-LV Power Oscillating Multi-Tool Blade Saw for

QBit SQ1000-S-LV Outlet Box Saw Blade for Oscillating Power Multi-Tools Specifically Designed to Cut-in Low Voltage Single Gang Brackets ------ Are you tired of over cutting your drywall using a reciprocating or drywall saw? ------ Are you looking for a better way to make Single-Gang cut-outs for retrofit wall boxes? The SQ1000-S-LV will Cut-in exact rectangular-holes in seconds. --- If your job requires you to cut-in wall boxes in drywall, the QBit is for you. --- Fits on virtually all Oscillating Power Multi-Tools and turns it into a hole making machine! --- Unlike a drywall saw which leaves unsightly ragged edges, the QBit makes a perfect hole every-time and it does so quick and efficiently! American Engineered & Made in the USA. We highly recommend that you invest in this tool! ------ PERFECT FOR: Anyone who needs to make single gang rectangular-holes in drywall for wall boxes, including: High and Low-Voltage Tech - electricians, telephone, data, alarm/security, CCTV/IP-camera, antenna, cable, dish, home-theater, automation, HAVC, Drywall Contractor/Installer, Etc.------ *NOTE: QBit was designed to fit all popular Oscillating Tool such as DeWalt, Milwaukee, Bosch, Fein, etc. If your Multi-Tool has a different connection type on it, Bosch makes a little adapter (OIS001B) for l...

  • Color: Black
  • Brand: Qbit
  • ASIN: B074ZP362W
  • UPC: 857842006185

13Pcs Double Sided Rotary Spot Weld Cutter Sets, 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Metalworking Tools w/Replacment Blade for Power Drill Spot Welding

13Pcs Double Sided Rotary Spot Weld Cutter Sets,

Wide Application: used on iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc.High quality heat resistant steel blades allow for reliable cuts over and over againAllow you to avoid the risk of needing to pause in the middle of a job due to dulling bladesDouble- sided blades allow for twice the efficiency. Double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutterSmall incision resistance,feature drilling stably, fast speed, not breaking the borderGreat for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel, alleviates the need to pry and break weldsSpecification:Material: high speed steel, high strength and hardnessCutting Blade Diameter: 3/8"Arbor Size: standard 1/4"Package contents:1x cutter Drill with double cutter10x extra 3/8" cutters2x Pilot Pin1x Plastic Storage CaseNote:Pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point provides extra guidance/stability when beginning the cut

  • Color: Silver
  • Brand: ZKer
  • ASIN: B07CVKFGN4
  • UPC: 634759423140

Drilaxâ"¢ 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4, 3/8, 1/2 (0.5 Inch) , 3/4 , 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2, Model: DRILAX100750, Outdoor & Hardware Store

Drilaxâ"¢ 10 Pcs Diamond Drill Bit Set Hole

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets 10 Popular Sizes: 1/4 to 2 - Elegant storage case. High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2 Popular 10 Sizes - Great Value No need for Center Pilot Drills Please Do NOT Use Dry Maximum 3/8 inch Shank Size Can be used with Handheld or Upright Drillers The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc. Drilax tools can drill 1 in depth. Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool: a- You can build a mini water dam around the hole with plumbers putty. b- You can choose to spray water on the drill bit. c- Or you can use running water to cool the drill bit. EASY TO USE Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target: a- You can make your o...

  • Color: Silver
  • Brand: DRILAX
  • ASIN: B00V3WQ2WE
  • UPC: 046737339938

6 inch Hole Saw for Making Cornhole Boards 152mm Corn Hole Drilling Cutter BI-Metal Heavy Duty Steel Blade & Hex Shank Drill Bit Adapter By STARVAST for Cornhole Game, Home Improvement (Red)

6 inch Hole Saw for Making Cornhole Boards

STARVAST Cornhole Boards Hole Saw Blade, 6 inch (152mm) Corn Hole Drilling Cutter for Cornhole Boards and Home Improvement ● Corn Hole Drilling Cutter will provide smooth, even professional cutting. ● Hole Saw Blade is a premium construction grade tool that cuts perfect 6 inch (152mm) diameter holes. ● Best for Cornhole Boards and Mounting of Lights & Speakers in Drywall, Wood, Plastic, & Soft Metal. Specification: Material: High speed steel / Bi-Metal Design: Non-binding clean edge design Surface treatment: Silicon carbide coating Diameter: 152mm (6 inch) Cutting depth: 30mm Color: Black Shank: 6 hex shank Package Included: 1 x 6-inch (152mm) hole saw 1 x 3/8 inch quick change arbor 3 x high-speed steel pilot drills 1 x Allen wrench

  • Color: Red
  • Brand: StarVast
  • ASIN: B07H555294
  • UPC: 604213562685

Acrux7 Cornhole Boards Hole Saw Blade, 6 inch (152mm) Corn Hole Drilling Cutter for Cornhole Game, Heavy Duty Steel Design(Red)

Acrux7 Cornhole Boards Hole Saw Blade, 6 inch

Acrux7 Hole Saw Drill Bit / 6 inches Diam for Corn Hole Drilling Material: Carbon Steel, Durable and no Rust Package: 1 pack 6-inch hole saw 1 pack hex shank drill bit adapter Attention: It drills as clockwise rotation.

  • Color: Red
  • Brand: Acrux7
  • ASIN: B07D7TXWRB
  • UPC: 663585692994
Similar Hole Cutter Blade Results