Hot Racing HPI Nitro MT2 Aluminum Rear Shock Tower NMT2030

Hot Racing HPI Nitro MT2 Aluminum Rear Shock

This is the optional blue aluminum Rear Shock Tower for the HPI MT2 series vehicles. FEATURES: purple anodized aluminum INCLUDES: One purple aluminum rear shock tower 2 4/40 ball ends 2 screws REQUIRES: Removing stock rear shock tower COMMENTS: This will work on either the MT2 RTR and the MT2 SS

  • Brand: Hot Racing
  • ASIN: B0784Y6Y67
  • UPC: 083745276794

HPI Nitro MT2 18SS Sealed Ball Bearing Kit for RC Cars

HPI Nitro MT2 18SS Sealed Ball Bearing Kit

HPI Nitro MT2 18SS Sealed Bearing Set (8) 10x15x4 (10) 5x11x4 (2) 5x10x4 You are purchasing the bearing listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.

  • Brand: FastEddy Bearings
  • ASIN: B00K2C5M6S

HPI Nitro MT2 18SS Ceramic Rubber Sealed Ball Bearing Kit for RC Cars

HPI Nitro MT2 18SS Ceramic Rubber Sealed Ball

HPI Nitro MT2 18SS Ceramic RubberSealed Bearing Set Steel Races and Cages combined with Ceramic Balls, Non Contact Rubber Seals , and Grease, will give you the absolute strongest and best off road performance available.We have included no contact rubber seals to keep the contamination out and the super slick grease in. This offers the outstanding durability that off road demands.This is truly a WINNING combination. The high-performance and durability of ceramic balls, and the No maintenance durability of rubber seals and grease will keep you going smoother and faster then any other bearing on the market. (8) 10x15x4Ceramic (10) 5x11x4Ceramic (2) 5x10x4Ceramic You are purchasing the bearing listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.

  • Brand: FastEddy Bearings
  • ASIN: B00ZVU4RSU

GPM Racing NRS402207 HPI Nitro RS4 Mt Aluminum Rear Knuckle Arms

GPM Racing NRS402207 HPI Nitro RS4 Mt Aluminum

set of optional Aluminum Knuckle for the HPI Nitro RS4, Mt Mt2 Super nitro etc. FEATURES: Constructed of durable milled aluminum, anodized purple in colorKeep the rear wheels pointed where they should! These hubs will remove the flex found in your stock plastic parts. (2 Deg Toe)YOU WILL RECEIVE: Two Aluminum Knuckle for the HPI RS4REQUIREMENTS: Installing at each wheel description revised by: DB November 16, 2012

  • Brand: GPM Racing
  • ASIN: B00A299XPW

Hot Racing NMT2055 Purple Alum. Front Arm Set Mt2

Hot Racing NMT2055 Purple Alum. Front Arm Set

These are the optional purple Aluminum Lower Suspension Arms for the HPI MT2 or MT2 SS. FEATURES: Purple aluminum construction. stainless steel hinge pinsYOU WILL RECEIVE: Two lower arms. Four hinge pins w/e-clips. REQUIREMENTS: Installing onto the vehicle. COMMENTS: Will only not fit original Nitro MT. description revised by: DB October 31, 2012

  • Brand: Hot Racing
  • ASIN: B00A298ZT2
  • UPC: 083745276473

HPI 86301 Universal Dogbone 7x116mm Nitro MT2 (2)

HPI 86301 Universal Dogbone 7x116mm Nitro MT2

Universal dogbones offer more efficient transfer of power to the wheels, for higher speed and smoother suspension movement. Made from high strength steel for maximum durability, these are tougher than the stock dogbones and perfect for extreme driving conditions. The chrome plated finish provides extra durability and custom looks.

  • Brand: HPI Racing
  • ASIN: B000BM9TOA

Hobby Products International 86336 Heavy-Duty Final Gear Set Nitro MT2

Hobby Products International 86336 Heavy-Duty Final Gear Set

HD Final Gear Set/P1X38T/P1X13T MT 2

  • Brand: Hobby Products International
  • ASIN: B000BMI7I4

Hobby Products International 15105 Nitro Star G3.0 Engine with Pullstart

Hobby Products International 15105 Nitro Star G3.0 Engine

This is the HPI Nitro Star G3.0 Pull Start Engine. Using the latest technology and construction techniques, this amazingly fast, durable and easy to adjust engine will give you the power you need to pulverize the competition! The Nitro Star G3.0 is the standard power plant for the Firestorm 10T stadium truck, Nitro RS4 3 Drift and Nitro MT2 G3.0 vehicles. Specifications:Glow Plug: R5 (use HPI1504) Displacement: 3.01cc Bore: 16.8mm Stroke: 13.6mm Maximum Horse Power: 2.2PS(2.17hp)/ 31,000rpm Maximum RPM: 32,000rpm Head Gasket: x3 0.2mm Carburetor: F2 Composite 6.5mm NOTE:To fit this engine in a standard MT2 you will need the optional HPI86000 engine mount.

  • Brand: Hobby Products International
  • ASIN: B000M0UAM6

Dynamite Air Filter Oil 45cc

Dynamite Air Filter Oil

  • Brand: Dynamite
  • ASIN: B0006O4Z2E
  • UPC: 885385424654

Dynamite Temperature Recording System

Dynamite Temperature Recording

Includes 5 Temperature Sensors Power Leads Key Features Log 5 channels (5 sensors) of temperature data Temperature sensors can be built into vehicles and are easy to replace Highly visible LCD user interface can be seen in daylight and from a distance Easily access recorded maximum and minimum temperature readings for each channel Operates continuously in damp and dirty environments Power cord with receiver connector can be customized for use with different vehicles Overview The Dynamite Temperature Recording System allows you to monitor and record the temperature of your sensitive components to be sure they are operating in the optimal range. You can easily monitor the temperature of your ESC, motor, battery, and other components along with ambient temperature. The water-resistant temperature system allows you to monitor up to 5 channels simultaneously and has a large back lit LCD that clearly displays the temperature data. Material: Plastic Length: 57mm Width: 33mm Height: 17mm Weight: 3.0 oz Measures: Temperature Input Connector Types: 3-Pin Receiver Connector Input Voltage: 3.5 to 9V DC

  • Brand: Dynamite
  • ASIN: B00CITJXNQ
  • UPC: 885164499149

GPM Racing NMT4048 HPI Nitro Mt Purple Aluminum Steering

GPM Racing NMT4048 HPI Nitro Mt Purple Aluminum

Tighten your steering and improve straight line tracking with this aluminum 6061 T6 steering assembly.

  • Brand: GPM Racing
  • ASIN: B00A299VGS

HPI Nitro MT2 G3.0 Sealed Ball Bearing Kit for RC Cars

HPI Nitro MT2 G3.0 Sealed Ball Bearing Kit

HPI Nitro MT2 G3.0 Sealed Bearing Set (8) 10x15x4 (10) 5x11x4 (2) 5x10x4 You are purchasing the bearing listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.

  • Brand: FastEddy Bearings
  • ASIN: B00K2C5KBU

HPI Nitro RS4 MT2 Ceramic Sealed Bearing Kit

HPI Nitro RS4 MT2 Ceramic Sealed Bearing

HPI Nitro RS4 MT2 Ceramic Sealed BearingSet (6) 10X15X4 Ceramic (10) 5X11X4 Ceramic (8) 4X8X3 Ceramic You are purchasing the bearing listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.

  • Brand: FastEddy Bearings
  • ASIN: B07SQFHCVQ
  • UPC: 769173990425

Redcat Racing 80142A Nitro R/C Starter Kit

Redcat Racing 80142A Nitro R/C Starter

Works with : AFTERSHOCK 21,AFTERSHOCK 3.0,AFTERSHOCK 3.5,AVALANCHE XP,BACKDRAFT 3.5,CALDERA 3.0,EARTHQUAKE 3.0,EARTHQUAKE 3.5,EARTHQUAKE XP,HURRICANE XL,HURRICANE XP,HURRICANE XTR,LANDSLIDE 21,LANDSLIDE LT,LIGHTNING STR,MAELSTROM LT,MONSOON XP,MONSOON XTR,SANDSTORM 21,SANDSTORM LT,SHOCKWAVE,TORNADO BB,TORNADO S30,TSUNAMI (nitro),TYPHOON XP,VOLCANO MX,VOLCANO S30,VOLCANO STX,VOLCANO SV,VOLCANO T2,VORTEX SS

  • Brand: Redcat Racing
  • ASIN: B002VN8JWA
  • UPC: 747725330974

HPI MT2 18SS Nitro Sealed Ball Bearing Kit for RC Cars

HPI MT2 18SS Nitro Sealed Ball Bearing Kit

HPI MT2 18SS Nitro Sealed Bearing Set (8) 10x15x4 (2) 5x10x4 (10) 5x11x4 You are purchasing the bearing listed above.In many cases the bearing sizes may change depending on your particular model and the date that it was manufactured as well as different hop ups you may have installed. PLEASE DOUBLE CHECK you R/C before ordering to make sure you get all the proper bearings. We try to keep the kits updated as best as we can. If you find a variation or mistake in our kits, please contact us so we can look into it.

  • Brand: FastEddy Bearings
  • ASIN: B00K2C1CA8
Similar Hpi Nitro Mt2 Results