Assault Racing Products PC4033 Ford 351 Windsor Single Plane High Rise Satin Aluminum Intake 3500-7500 RPM 351W

Assault Racing Products PC4033 Ford 351 Windsor Single

This is a new satin high rise single plane intake for small block Ford 351W engines. Big power for mid to upper RPM ranges! Ideal for high performance and race applications. These intakes are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as bridged rear water passages and nitrous/injector bosses, and the best part - the price! Intake works on 351Ws with 9.50" deck height. For use with square bore style carbs. No provision for manual choke or exhaust crossover. Not EGR equipped. Please note that early 351W engines with points style distributor may have a clearance problem with manifold and may require the use of a smaller diameter distributor. Manifold Specifications: Part Number: PC4033 RPM Range: 3500 - 7500 Intake Port Dimensions: 1.91" x 1.18" Manifold Height: 5.68" Features: Satin Finish 360° single plane high rise design for outstanding power from 3500 to 7500 RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - steel mold cast to reduce core shift Bridged rear water crossover passage to equalize flow and help keep temperature lower Has 2 extra tapped water ports a...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75FO2E

Dorman 615-375 Upper Intake Manifold with Molded Throttle Body

Dorman 615-375 Upper Intake Manifold with Molded Throttle

Intake Manifolds transfer fuel and air mixtures to the cylinder. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

  • Color: Ready To Paint If Needed
  • Brand: Dorman
  • ASIN: B00QSLNG2O
  • UPC: 019495456162

Assault Racing Products PC2031 Small Block Chevy Single Plane High Rise Satin Aluminum Intake 3000-7500+ RPM SBC

Assault Racing Products PC2031 Small Block Chevy Single

This is a new satin aluminum high rise single plane intake for small block Chevy. Big power for mid to upper RPM ranges! Ideal for high performance and race applications. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover. Not EGR equipped. Manifold Specifications: Part Number: PC2031 RPM Range: 3000 - 7500+ Intake Port Dimensions: 1.80" x 1.11"*1 Manifold Height: 6.06" NOTE (1) - port is intentionally left small to allow for porting/gasket matching Features: Satin Finish 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - allows custom porting for maximum power Dual distributor hold-down provisions for extra protection against distributor rot...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75GIP6

Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5, 500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

  • Brand: Edelbrock
  • ASIN: B00063046Q
  • UPC: 085347027019

Holley 300-137 LS1/LS2/LS6 Single Plane Intake Manifold

Holley 300-137 LS1/LS2/LS6 Single Plane Intake

Holley is an industry leader when it comes to GM Gen III and IV LS engine performance parts. Their LS Single Plane Mid-Rise Intake Manifolds are now available for both carbureted and EFI applications. They are ideal for higher horsepower engines as well as those that are incorporating power adders such as forced induction or nitrous oxide. Thanks to Holley's advanced casting technology, these intakes weigh in at only 11.5 lbs. The runner design of the intake manifold features a constant cross sectional area and is ideal for a broad power band from 2,500-7,000 RPM. They feature consistent wall thickness throughout for balanced performance and sealing strength. This excellent design also features the lowest carb mounting flange height possible without sacrificing any power. Features: Designed for performance minded LS engines with a 2,500-7,000 rpm power band Cast aluminum construction with consistent wall thickness throughout and strong mounting flanges Constant cross sectional area produces a broad torque curve Accepts a carburetor/throttle body with a Holley 4150 square bore flange Available with machined ports for EFI installation, no fabrication required The lowest carb flange height possible for improved hood clearance Matching black anodized billet fuel rails ava...

  • Brand: Holley
  • ASIN: B000746JSQ
  • UPC: 090127687758

Empi Single Cast Manifold 40-52Idf, Dune Buggy Baja Bug

Empi Single Cast Manifold 40-52Idf, Dune Buggy Baja

Intake manifold for Weber IDF or EMPI HPMX Carburetors These manifolds are used with standard 2 bbl carb that utilizes simutaneous throttle activation. Increased low end power and acceleration provide added pep for all purposes. Supplied with gaskets. Zinc platedIntake Manifold For Weber Idf & HPMX Carbs Single Carb

  • Brand: Empi
  • ASIN: B003KKFA98
  • UPC: 707924221732

Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln/Mercury Models

Dorman 615-175 Upper Intake Manifold for Select Ford/Lincoln/Mercury

More like a complete service kit than a single part. Dorman’s Intake Manifold includes all the essential components for a full repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

  • Color: Black
  • Brand: Dorman
  • ASIN: B000CIXMIC
  • UPC: 194950339294

Holley 300-132 Left Side Single Plane Mid-Rise Intake

Holley 300-132 Left Side Single Plane Mid-Rise

The Modular Mid-Rise intake utilizes the popular Holley LS1/LS2/LS6 cathedral port Mid-Rise 2 x 4 intake Manifold along with a purpose built plenum base Adapter and a Holley 92MM EFI plenum top which converts it into a Mid-Rise EFI intake manifold. With a max overall height of only 10.44in., the Mid-Rise Manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500-6,500 RPM and limited hood clearance. It's perfect for a blow-thru or turbocharged application. Being part of the Holley modular intake line means that this intake is not only available as a complete kit with intake, adapter, 92MM top and fuel rails, but all parts can also be purchased separately for a custom intake build. The plenum Adapter (PN 300-231) will accept all of the popular Holley Hi-Ram plenum tops as a foundation for custom induction systems.

  • Brand: Holley
  • ASIN: B000753PGE
  • UPC: 090127687734

Edelbrock 7156 INTAKE MANIFOLD

Edelbrock 7156 INTAKE

The Edelbrock Performer RPM Intake Manifold provides maximum high-RPM power while maintaining good throttle response for street applications. The Performer RPM's are dual-plane, high-rise intakes with a 180 degree firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street engines that run up to 6, 500 RPM. They are not for emissions equipped engines. The factory composition-type embossed gasket also works satisfactorily. It delivers maximum power with a broad torque curve for high-performance street applications. This manifold has no provisions for exhaust heated or stock-style choke.

  • Brand: Edelbrock
  • ASIN: B00062YAA8
  • UPC: 085347071562

Holley Performance 300-261 Single Plane Intake Manifold Kit

Holley Performance 300-261 Single Plane Intake Manifold

The new single plane intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The carburetor-mounting pad is designed to accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1" shorter height than the 300-25 manifold, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance.

  • Brand: Holley
  • ASIN: B07GJNFNJR
  • UPC: 090127052136

Holley 825011 Holley Sniper Fabricated Intake Manifold Single Plane Carbureted RPM Power Band 1800-7000 Silver w/Sniper Logo Holley Sniper Fabricated Intake Manifold

Holley 825011 Holley Sniper Fabricated Intake Manifold Single

Holley Sniper Fabricated Manifolds use the same technology found in our cast manifolds. Sniper Intakes are an affordable intake manifold that fit many popular engine families and cylinder heads while producing excellent overall performance in many high performance and racing applications, particularly with larger displacement and/or higher RPM engines. These Fabricated manifolds also look great on street rods and show cars. These manifolds are ready to bolt on out of the box and are designed to accept Holley high flow throttle bodies and include high flow fuel rail kit (EFI manifolds only). These designs were developed using state of the art solid modeling software. Each manifold is precision fixtured and welded for a perfect fit and maximum structural integrity. Choice of TB openings 92mm & 102mm.

  • Brand: Holley
  • ASIN: B01EMSZGKE
  • UPC: 847875006597

Edelbrock 2913 INTAKE MANIFOLD

Edelbrock 2913 INTAKE

The Edelbrock Super Victor Vortec Intake Manifolds are arguably the most popular and flexible manifolds in racing. These single-plane manifolds are found on oval tracks, in drag racing, and on NASCAR engines. Maximum horsepower and torque are needed to win races in these single-plane manifolds. This manifold is designed for racers using Vortec cast iron or Edelbrock E-Tec aluminum cylinder heads. This manifold offers the same top-end horsepower, throttle response and advanced design features as Super Victor #2925. It is designed specifically to enhance the performance of the Vortec cylinder heads (also known as L31). The #2913 is the most powerful intake available for Chevy production heads.

  • Brand: Edelbrock
  • ASIN: B00062Z30O
  • UPC: 085347029136

Holley 300-136 LS3/L92 Single Plane EFI Intake Manifold

Holley 300-136 LS3/L92 Single Plane EFI Intake

The Modular Mid-Rise intake utilizes the popular Holley LS1/LS2/LS6 cathedral port Mid-Rise 2 x 4 intake Manifold along with a purpose built plenum base Adapter and a Holley 92MM EFI plenum top which converts it into a Mid-Rise EFI intake manifold. With a max overall height of only 10.44in., the Mid-Rise Manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500-6,500 RPM and limited hood clearance. It's perfect for a blow-thru or turbocharged application. Being part of the Holley modular intake line means that this intake is not only available as a complete kit with intake, adapter, 92MM top and fuel rails, but all parts can also be purchased separately for a custom intake build. The plenum Adapter (PN 300-231) will accept all of the popular Holley Hi-Ram plenum tops as a foundation for custom induction systems.

  • Brand: Holley
  • ASIN: B000746JSG
  • UPC: 090127687741

Edelbrock 5001 INTAKE MANIFOLD

Edelbrock 5001 INTAKE

The Edelbrock Torker II Intake Manifold is a low rise, single plane manifold that works well where hood clearance is limited. These manifolds work well in high RPM, high performance street applications. They produce gains in top-end horsepower and throttle response. Not intended for mileage or emissions applications, they are only for high performance vehicles.

  • Brand: Edelbrock
  • ASIN: B000630IBW
  • UPC: 085347050017

Professional Products 52031 Hurricane Satin Intake Manifold

Professional Products 52031 Hurricane Satin Intake

Satin finish. This Hurricane Intake Manifold is available for the standard 23 Degree cylinder heads. The Hurricane is very affordable and also produces more power and torque than many competitive models while using less fuel making it a very efficient manifold. Features include nitrous bosses, dual distributor hold-downs, four corner water ports plus a fifth pipe tapped water outlet in the front of the manifold. This manifold, unlike its competitors, will also fit 1987-'95 angle bolt heads.

  • Brand: Professional Products
  • ASIN: B001Q6EGJS
  • UPC: 665053520310
Similar Intake Manifold Single Results