3" Engine Air Flow Intake Tube Charge Pipe Reducer Cooling Set Fit BMW N55 135i 335i

3" Engine Air Flow Intake Tube Charge Pipe

3" High Flow Black Intake Turbo Charge Pipe + Reducer Cooling Kit For 2011 - 12 BMW N55 135i / 335i Specification: Size: 50.00 * 24.00 * 17.00cm Weight: 1.5kg Fits (For the reference): 2011-12 BMW 135i DCT/MT 2011 BMW 335i AT/MT 2011 BMW 335i xDrive AT/MT 2012 BMW 335i Convertible AT/MT 2012 BMW 335i Coupe AT/MT 2012 BMW 335i xDrive Convertible AT/MT 2012 BMW 335i xDrive Coupe AT/MT 2013 BMW 135is DCT/MT Package includes: 1 x Intake Charge hose 1 set silicone hose

  • Brand: BSTOOL
  • ASIN: B07JLZ227N
  • UPC: 610895457546

CDHPOWER Off Set Air Intake Pipe set (32mm), Gas Motorized Bicycle

CDHPOWER Off Set Air Intake Pipe set (32mm),

(GUARANTEED AND MONEY REFUND) NOTE: BOLTS STUD SPACING 32MM, DIAMETER OF PIPE HOLE: 14MM TO 15MM CDH Off Set Air Intake set are great for larger carburetors or for fitting on a bike frame that would be non-compatible with a normal manifold. for on cylinder with 32mm stud spacing; gasket included

  • Brand: CDHPOWER
  • ASIN: B06ZZSGP8M
  • UPC: 747100306204

Eheim 6719 Intake Pipe for 2217/2226/2229/2026/2028

Eheim 6719 Intake Pipe for

New pre-filter at top for longer intervals between cleaning. Simple to use and set up. Large volume self priming. Consumes less energy with more power. Easy to install and operate and provides unlimited, unhindered access to the entire aquarium.

  • Brand: Eheim
  • ASIN: B00345TYNC
  • UPC: 720686723979

Spectre Performance 60183 Chrome Pipe Plug Kit

Spectre Performance 60183 Chrome Pipe Plug

Spectre’s pipe plug set includes 8 threaded NPT plugs. These plugs are ideal to plug unused holes in intake manifolds, engine blocks or any location where a threaded hole is not needed. These plugs are triple chrome plated ensuring they perform as good as they look. This kit includes 2 of each in the following 4 sizes; 1/8 inch NPT, 1/4 inch NPT, 3/8 inch NPT and 1/2 inch NPT.

  • Brand: Spectre Performance
  • ASIN: B000BQ08QY
  • UPC: 798813068873

For Dodge SUV/Truck Cold Air Intake Pipe Kit Set (Black Pipe+Blue Filter)

For Dodge SUV/Truck Cold Air Intake Pipe Kit

Short Ram Intakes (SRIs) or similar Warm Air Intakes (WAIs) offer benefits over Cold Air Intakes (CAIs) which include better MPG due to a more complete burning of fuel. Users with forced induction engines often opt for short ram intakes because compressors adjacent to the engine, especially turbochargers, heat the incoming air and negate much of the benefits of a cold air intake. Moreover, SRIs are the intakes, which give bettter throttle response since it gets the engine the air quicker. This Air Intake Systems provide the best of both worlds in heat protection and improved breathability. Every kit includes an air filter that requires no oil, therefore no chance in contaminating the mass air flow sensor which can result in loss of power and higher fuel consumption.Package Included:1 x Aluminum intake pipe2 x Rubber-base air filterSilicon couplersHoses/vacuum linesAll necessary hardware includedCompatible with:02-04 Chevrolet Corvette02-09 Dodge Dakota04-09 Dodge Durango03-10 Dodge Ram 150003-04 Jeep Grand Cherokee04-07 Jeep Liberty

  • Color: Blue
  • Brand: Auto Dynasty
  • ASIN: B00OT59K8A

Dromedary Cold Air Intake Pipe Kit Set Silver Pipe Blue Filter For Chevrolet Dodge Durang

Dromedary Cold Air Intake Pipe Kit Set Silver

Fitment: 2002-2004 Chevrolet Corvette 2002-2009 Dodge Dakota 2004-2009 Dodge Durango 2003-2010 Dodge Ram 1500 2003-2004 Jeep Grand Cherokee 2004-2007 Jeep Liberty Package Included: 1 x Aluminum intake pipe 2 x Rubber-base air filter Silicon couplers Hoses/vacuum lines All necessary hardware included Note: Professional Installation is Highly Recommended,Installation Instruction is NOT Included

  • Brand: Dromedary
  • ASIN: B07B252H7Z

For Dodge SUV/Truck Cold Air Intake Pipe Kit Set (Silver Pipe+Red Filter)

For Dodge SUV/Truck Cold Air Intake Pipe Kit

Short Ram Intakes (SRIs) or similar Warm Air Intakes (WAIs) offer benefits over Cold Air Intakes (CAIs) which include better MPG due to a more complete burning of fuel. Users with forced induction engines often opt for short ram intakes because compressors adjacent to the engine, especially turbochargers, heat the incoming air and negate much of the benefits of a cold air intake. Moreover, SRIs are the intakes, which give bettter throttle response since it gets the engine the air quicker. This Air Intake Systems provide the best of both worlds in heat protection and improved breathability. Every kit includes an air filter that requires no oil, therefore no chance in contaminating the mass air flow sensor which can result in loss of power and higher fuel consumption.Package Included:1 x Aluminum intake pipe2 x Rubber-base air filterSilicon couplersHoses/vacuum linesAll necessary hardware includedCompatible with:02-04 Chevrolet Corvette02-09 Dodge Dakota04-09 Dodge Durango03-10 Dodge Ram 150003-04 Jeep Grand Cherokee04-07 Jeep Liberty

  • Color: Red
  • Brand: Auto Dynasty
  • ASIN: B00OT59TZE

JARDLI Glass Lily Pipe Inflow Outflow Set 20mm for 3/4" ID (19/25mm) Tubing

JARDLI Glass Lily Pipe Inflow Outflow Set 20mm

  • Brand: JARDLI
  • ASIN: B07J2FJQRQ
  • UPC: 607467149336

HIAORS Intake Manifold Inlet Pipe Gasket for GY6 125cc 150cc Hammerhead Twister 150 Go Kart Scooter 152QMI 157QMJ Kymco Znen Tank Taotao Lance Parts 2 set

HIAORS Intake Manifold Inlet Pipe Gasket for GY6

Intake Manifold Inlet Pipe Gasket for GY6 125cc 150cc Hammerhead Twister 150 Go Kart Scooter 152QMI 157QMJ Kymco Znen Tank Taotao Lance Parts

  • Brand: HIAORS
  • ASIN: B07K9G2QCC

HPS AJ400-300 6061 T6 Aluminum Joiner Tubing with Bead Roll, 16 Gauge, 4" Length, 3" OD, 0.065" Wall Thickness

HPS AJ400-300 6061 T6 Aluminum Joiner Tubing with

HPS (AJ400-300) 3" OD, 4" Length, 16 Gauge, 6061 T6 Aluminum Joiner Tubing with Bead Roll, 0.065" Wall Thickness is commonly used in industrial, automotive, marine and aerospace industry; Great for custom fabrication project such as DIY air intake, cooling systems, turbo intercooler piping setup because 6061 aluminum is the most popular and versatile alloy, and is the least expensive of the heat treatable aluminum alloys. HPS aluminum round tubing joiner is sold in the T6 condition, ideal for sawing, machining, sanding, and polishing. The aluminum joiner tube can be polished, but due to the softness of the aluminum, care must be taken not to remove too much material, especially in the area near any welds. Remark: HPS does NOT recommend 6061 Aluminum to be used for exhaust systems.

  • Brand: HPS
  • ASIN: B014GXPWV8
  • UPC: 648044822358

Pipe Plug Fitting Kits 1/8 Inch 1/4" inch 3/8" inch 1/2" inch NPT Male, Set of 20

Pipe Plug Fitting Kits 1/8 Inch 1/4" inch

  • Brand: AIB2C
  • ASIN: B07R82DDJB
  • UPC: 740229286754

JARDLI Glass Lily Pipe Mini Inflow Outflow Set 10mm for 9/12mm Tubing - Nano Aquarium Planted Tank Aquascaping

JARDLI Glass Lily Pipe Mini Inflow Outflow Set

  • Brand: JARDLI
  • ASIN: B01NBHKJIX

Head Gasket Set Replacement For Ford 3.8L Compatible with Mustang F150 E150 E250 1999-2004 4.2L

Head Gasket Set Replacement For Ford 3.8L Compatible

Fits "98-00 FORD E-150 ECONOLINE CLUB WAGON 4.2L 256CID V6 OHV 12V VIN ""2""" "98-00 FORD E-150 ECONOLINE 4.2L 256CID V6 OHV 12V VIN ""2""" "98-00 FORD E-250 ECONOLINE 4.2L 256CID V6 OHV 12V VIN ""2""" "98-00 FORD F-150 4.2L 256CID V6 OHV 12V VIN ""2""" "99-04 FORD MUSTANG 3.8L 232CID V6 OHV 12V VIN ""4""" "2004 FORD MUSTANG 3.9L 238CID V6 OHV 12V VIN ""6""" Package includes: Multi-Layered Steel (MLS) Head Gasket Valve Cover Gasket Intake Manifold Gasket Exhaust Manifold Gasket Valve Stem Seals Exhaust Pipe Gasket Cam Seal Grommets Rubber O-rings Spark Plug Seals Other Small Gaskets

  • Brand: Vincos
  • ASIN: B01JUJQVTA

Felpro MS 98003 T1 Intake Manifold Gasket Set

Felpro MS 98003 T1 Intake Manifold Gasket

Fel-Pro gaskets offers 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

  • Brand: Fel-Pro
  • ASIN: B002E2OUQW
  • UPC: 614046906396

JARDLI Metal Lily Pipe Stainless Steel Inflow Outflow for Aquarium Planted Tank (13mm for 12/16mm (1/2'') Tube)

JARDLI Metal Lily Pipe Stainless Steel Inflow Outflow

Filter outflow, carries clean water from the external filter into the aquarium tank. The inflow and outflow pipes suitable for all type of external canister filter.  Easy to clean, remove convenient assembly. Feature: Made of 304 Stainless Steel Harmless, sturdy, against rust, corrosion resistance Mirror Polishing Give superb appearance to your aquarium Thicker Tube Wall 1.25mm thickness, more stronger Double Clamping Connector Prevent the canister filter tubing from falling off Size: 13mm for 12/16mm (1/2'') water tube Package include: 1x stainless steel inflow 1x stainless steel lily pipe outflow 2x acrylic holders Notes: Pipes should be cleaned before used in your aquarium tank.

  • Brand: JARDLI
  • ASIN: B01LZGDY88
Similar Intake Pipe Set Results