Kraft Tech Rigid Frame K16001

Kraft Tech Rigid Frame

• 1-1/4″ tubing and designed for removable transmission plate for 4, 5, or 6-speed transmissions• Utilizes stock width disc brake wheel and 1986-99 Softail style brakes, axle and adjusters• 30° rate and 0″ down tube stretch• Accepts Evolution/Shovelhead/Panhead motors• Designed for 130/140 rear tire using a chain final drive

  • Brand: Kraft/Tech
  • ASIN: B000WK8S7U

Kraft Tech 20022 Black Softail Style Frames For Wide Tire Twin

Kraft Tech 20022 Black Softail Style Frames For

Designed for use with an alternator-type Shovelhead or Big Twin evolution engine. Includes manufacturers statement of origin (mso). features 1-1/2'' drawn over mandrel (DOM) ASTM a513-96t5 3/16'' wall tubing for backbone strength, 1-1/4'' O.D. X .120'' wall tubing for downtubes and frame cradle, additional clearance built-in at backbone for evolution style engine with up to .200'' taller cylinder/head length. Allows rear rocker box to be serviced without removal of the entire engine, TIG welded on All new hardened tooling for the most accurate fit possible, dual gussets at front and rear motor mounts and at transmission mounts, boxed lower seat post mount, fully machined hourglass style sheering neck, transmission mount built in, bolt on rear fender struts (not included), use with 8-1/2'' fender or 9'' fender when using strut spacer, custom style wide rear fork made of 1'' round solid steel, axis tube, axis bolts and spacer washers are chrome plated, rear fork bearings and retainers, rear axle kit with left side spacer and nut are chrome plated, fits 180 rear tire with belt drive or 200 tire with chain drive.Required components 5 or 6 speed transmission and mounting plate, chain or belt drive found in drive train section, software 1986/1999 rear wheel hub found in wheel section, ...

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00EYQUKXI
  • UPC: 700736567487

Kraft Tech Sportster Rigid Frame K15100

Kraft Tech Sportster Rigid Frame

1-1/4in tubing. 30 degree and 34 degree neck rakes. Available in stock width tire or 180 tire. No tank mounts. Accepts 86-03 Sportster driveline. Made in USA.Harley Davidson XL1200C Sportster 1200 Custom 1996-2003Harley Davidson XL1200S Sportster 1200 Sport 1996-2003Harley Davidson XL883C Sportster 883 Custom 1999-2003Harley Davidson XL883R Sportster 883 Roadster 2002-2003Harley Davidson XLH1100 1986-1987Harley Davidson XLH1200 1988-2003Harley Davidson XLH883 1986-2003Harley Davidson XLH883DLX Sportster 883 Deluxe 1986-1995Harley Davidson XLH883HUG Sportster 883 Hugger 1987-2003

  • Brand: Kraft/Tech
  • ASIN: B0031296AO

Kraft Tech 20014 Black Softail Style Frames For Twin Cam Engine

Kraft Tech 20014 Black Softail Style Frames For

Standard width, the backbone is made from 1 1, 2'' square steel tubing with .188'' wall Thickness for maximum strength., TIG welded in high stress areas, uses software 1984/1988 steering fork head cups and races found in the front end section, fully machined rear fork support plates for OE look, includes manufacturer's statement of origin, does not include provision for fork lock, designed for use with 2000/later Softail components, requires our 26543, seatpost/coil mount found in the frame and body section to retain the OE style ignition coil in the stock location.Note: as with any frame-up custom build project, it is common shop practice to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of All parts used.Kraft Tech. Mpn: 20014. Item Weight: 56 lbs.

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00EYQUK6U
  • UPC: 700736567463

Kraft Tech 20009 Black Bobber Style Rigid Frames For Big Twin

Kraft Tech 20009 Black Bobber Style Rigid Frames

These rigid frames have all the rugged good looks of those found years ago but built with the technology of the 21st century. Today's high output engines require the utmost frame strength, as well as good brakes. These frames were designed and manufactured with both in mind. Special Features Standard Width 4 or 5 Speed Chain Drive, 1 1/2'' O.D. Drawn Over Mandrel (DOM) .188'' wall tubing for backbone strength, 1 1/4'' O.D. Drawn Over Mandrel (DOM) .120'' wall tubing for cradle and tail strength, Additional clearance built in at backbone for Evolution style engine with up to .200'' taller cylinder/head length. Allows rear rocker box to be serviced without removal of entire engine, Will accept 4 or 5 speed transmission, For maximum fusion all high stress areas are TIG welded, Dual gussets at front & rear motor mounts and at transmission mounts, Boxed lower seat post mount, Welded on exhaust hanger mount, Fully machined hour glass style steering neck, Fork lock tab, Softail style seat front mounting tab, A Manufacturer's Statement of Origin is included., Required Components 4 or 5 speed transmission & mounting plate found in the drive train section, Chain final drive, 1973/1983 chain drive style rear wheel/hub found in the wheel section, Late 1987/1999 Softail style rear brake assem...

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00QI2SVU0
  • UPC: 705554413213

Kraft Tech FXR-Style Frame K17057

Kraft Tech FXR-Style Frame

34 degree rake, 2in stretch. 1-1/4in tubing, 1-3/4in backbone. Designed to accept Big Twin forward controls and the swingarms will accept stock FXR caliper brackets. Includes: swingarm kit, complete with raw rear fork, offset pivot blocks, wide axle, spacer, pulley spacer and related hardware. Designed for 180 width tire with stock width rear belt or 200 width tire with chain. Use FXE style fender struts with these frames.

  • Brand: Kraft/Tech
  • ASIN: B0041CFZS0

Kraft Tech 180-Tire Rigid Frame K16006

Kraft Tech 180-Tire Rigid Frame

Frames come with 30 degree or 34 degree neck rake angles, with front leg stretches of 0in or 2in. Frames are designed for removable transmission plate for chain drive 4 and 5-speeds. Uses stock width disc brake wheel, Softail-style brakes (pre-2000), axle and adjusters. Accepts Softail-style flatside tanks. Made in USA. 30 Degree Rake, 0in Downtube Stretch, 1-1/2in Backbone Stretch

  • Brand: Kraft/Tech
  • ASIN: B000WK6VWO

Kraft Tech 20013 Black Softail Style Frames For Twin Cam Engine

Kraft Tech 20013 Black Softail Style Frames For

Standard width, the backbone is made from 1 1, 2'' square steel tubing with .188'' wall Thickness for maximum strength., TIG welded in high stress areas, uses software 1984/1988 steering fork head cups and races found in the front end section, fully machined rear fork support plates for OE look, includes manufacturer's statement of origin, does not include provision for fork lock, designed for use with 2000/later Softail components, requires our 26543, seatpost/coil mount found in the frame and body section to retain the OE style ignition coil in the stock location.Note: as with any frame-up custom build project, it is common shop practice to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of All parts used.Kraft Tech. Mpn: 20013. Item Weight: 56 lbs.

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00EYQUINA
  • UPC: 700736567456

Kraft/Tech K16005 Rigid Straight Backbone Style Frame for Big Twin - 34deg. - 2in. Stretch

Kraft/Tech K16005 Rigid Straight Backbone Style Frame for

Constructed of 1-1/4in. DOM steel tubing, mandrel bent, TIG and MIG welded. Designed for 4-, 5- and 6-speed transmissions; transmission plate sold separately. Accept Evolution motors with clearance for cylinders up to .200in. taller than stock Evolution. Gas tank mounts, rear axle, exhaust bracket, belt guard tabs and coil bungs sold separately. Made in the U.S.A..

  • Brand: Kraft/Tech
  • ASIN: B071NRDN5G

Kraft/Tech Rigid Frame K15161

Kraft/Tech Rigid Frame

Frames come with 30 degree or 34 degree neck rake angles, with front leg stretches of 0in or 2in. Frames are designed for removable transmission plate for chain drive 4 and 5-speeds. Uses stock width disc brake wheel, Softail-style brakes (pre-2000), axle and adjusters. Accepts Softail-style flatside tanks. Made in USA. For 180 rear tire

  • Brand: Kraft/Tech
  • ASIN: B0041QSE34

FOR HARLEY & KRAFT TECH SANTEE CHOPPER FRAMES 18X5.5" 60 SPOKE REAR WHEEL

FOR HARLEY & KRAFT TECH SANTEE CHOPPER FRAMES

- This dual flange rear wheel use with 180 or 200 series wide frame applications - This sealed bearing wheel accepts pulleys, sprockets & brake rotors fitted to models 2000-2005 *High end first quality wheel built by Americans *Triple show chrome billet hub & rim *Polished stainless spokes *3/4" sealed bearings & inner spacer included *Complete sealed rim for tubeless tire

  • Brand: KCINT / Ultima
  • ASIN: B01N80X3N3

Kraft/Tech 20228 Black Iron Head Sportster Rigid Frames

Kraft/Tech 20228 Black Iron Head Sportster Rigid

1 1/4'' thick wall DOM steel tubing with 1 1/2'' backbones, wide tire frames accept 180 series tire with chain drive, stock frame accepts 140 tire with chain, frames must be used with our part 26036, front lower motor mounts.Note: as with any frame-up custom build project, it is common shop practive to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of All parts used. Kraft Tech. Mpn: 20228. Item Weight: 52 lbs.

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00FOG0ZCI
  • UPC: 700736644867

Kraft/Tech Rigid Straight Backbone Style Frame for Big Twin - 30deg. - 0in. Stretch K16004

Kraft/Tech Rigid Straight Backbone Style Frame for Big

Constructed of 1-1/4in. DOM steel tubing, mandrel bent, TIG and MIG welded. Designed for 4-, 5- and 6-speed transmissions; transmission plate sold separately. Accept Evolution motors with clearance for cylinders up to .200in. taller than stock Evolution. Gas tank mounts, rear axle, exhaust bracket, belt guard tabs and coil bungs sold separately. Made in the U.S.A..

  • Brand: Kraft/Tech
  • ASIN: B07197Z859
  • UPC: 600901214690

Kraft Tech 22031 Black Flat Rear Fender for Rigid Frames

Kraft Tech 22031 Black Flat Rear Fender for

Designed with strength in mind, these one piece hard body, rear fenders are cold rolled from 14 gauge steel, they measure a full 48'' in circumference and can be cut to your desired length, fenders are not drilled or relieved for the chain or drive belt, see the frame and body section for fender supports.Kraft Tech. Mpn: 22031. Item Weight: 10.66 lbs.

  • Color: Black
  • Brand: Kraft/Tech
  • ASIN: B00QI2TIES
  • UPC: 705554413268

Kraft Tech Sportster Rigid Frame K15101

Kraft Tech Sportster Rigid Frame

1-1/4in tubing. 30 degree and 34 degree neck rakes. Available in stock width tire or 180 tire. No tank mounts. Accepts 86-03 Sportster driveline. Made in USA.

  • Brand: Kraft/Tech
  • ASIN: B0031255HC
Similar Kraft Tech Frame Results