Freud 1/2" (Dia.) Bearing Flush Trim Bit with 1/4" Shank (42-104)

Freud 1/2" (Dia.) Bearing Flush Trim Bit with

  • Color: Original Version
  • Brand: Freud
  • ASIN: B0000225Y9
  • UPC: 100058665234

Bosch 85269M 3/8 In. x 1/2 In. Carbide Tipped 2-Flute Flush Trim Bit

Bosch 85269M 3/8 In. x 1/2 In. Carbide

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.

  • Brand: Bosch
  • ASIN: B0002EVE9A
  • UPC: 789474879595

Freud 1/2" (Dia.) Bearing Flush Trim Bit with 1/2" Shank (42-114)

Freud 1/2" (Dia.) Bearing Flush Trim Bit with

These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish.

  • Brand: Freud
  • ASIN: B0000225YC
  • UPC: 881599015077

Yakamoz 4pcs 1/4 Inch Shank Top End Bearing Flush Trim Router Bit Set | 1/4" 5/16" 3/8" 1/2" Cutting Diameter

Yakamoz 4pcs 1/4 Inch Shank Top End Bearing

Yakamoz 4pcs Top End Bearing Flush Trim Router Bit Set Features: C3 micro-grain tungsten carbide cutter. Solid Hardened Steel Bodies with Anti-Kickback Design. Build-up & Heat Resistant Teflon Coating. Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch. Industrial grade micro grain carbide blade. High hook & shear angles allow cutters to slice smoothly into stock producing clean, splinter free. Specifications: Cutting Diameter: 1/4",5/16",3/8",1/2" with an top end bearing Cutting height: 1" Shank Diameter: 1/4" Body Material: Solid Hardened Steel Blade Material:C3 micro-grain tungsten carbide Max Rotating Speed: 12000 Package Included: 4 x Flush Trim Router Bits

  • Brand: Yakamoz
  • ASIN: B07FW3MKBR

Bosch 85268MC 3/8 In. x 1 In. Carbide-Tipped Double-Flute Flush Trim Router Bit

Bosch 85268MC 3/8 In. x 1 In. Carbide-Tipped

Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration.

  • Brand: Bosch
  • ASIN: B002E3DCFQ
  • UPC: 000346351811

Amana Tool - 51200 Solid Carbide Panel Pilot Flush Trim 1/4 Dia x 1/4 Shank 1-F

Amana Tool - 51200 Solid Carbide Panel Pilot

The ideal laminate trimming bit for high-volume production. Solid carbide and integral pilot (No bearing to maintain) extend life of bit, slim configuration reduces vibration. Suitable for routers and trimmers, #51200, diameter (D) 1/4, cutting Height (B) 1/4, shank (D) 1/4, overall length (L) 1-1/2, Type flush, flutes 1, 51200 Solid Carbide panel pilot flush trim 1/4 dia x 1/4 x 1/4 inch Shank 1-flute

  • Brand: Amana Tool
  • ASIN: B002S3YJCC
  • UPC: 738685152003

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE

WHITESIDE MACHINE 2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK X 2-1/2" OAL

  • Brand: Whiteside
  • ASIN: B000AM31PY
  • UPC: 733353380474

Amana Tool - 47147 Carbide Tipped Laminate Trimmer with Euro Square Bearing 1/2 Dia x 19/6

Amana Tool - 47147 Carbide Tipped Laminate Trimmer

Amana Tool Industrial quality Carbide Tipped laminate trim bits with the Euro square bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a strong Non-Stick Teflon which won't mark your edge so it can be wiped clean easily., #47147, diameter (D) 1/2, cutting Height (B) 19/64, shank (D) 1/4, overall length (L) 1-3/4, replacement bearing Sqb100, flutes 2, 47147 carbide Tipped laminate Trimmer with Euro square bearing 1/2 dia x 19/64 x 1/4 inch Shank router bit

  • Brand: Amana Tool
  • ASIN: B0112TV70O
  • UPC: 738685471470

Flush Trim Solid Carbide Spiral Down-Cut Router Bit - 1/4" Shank - Yonico 14120

Flush Trim Solid Carbide Spiral Down-Cut Router Bit

New: Redesigned with permanent bearing retaining collar to reduce trimming mishaps. This solid carbide flush trim router bit is designed to provide precise, efficient cuts and offers extreme durability. The spiral design largely reduces chipping. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. The two independent ball bearings at the tip ensure smooth running. 1/4" shank.

  • Brand: Yonico
  • ASIN: B00KZM0WMO
  • UPC: 765573826012

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush Trim Up Cut

Whiteside Router Bits RFT2100 1/4-Inch Diameter Spiral Flush

Providing state of the art results in flush trimming. The bit uses a double ball bearing pilot to run against your project template while the up cut flutes pull chips up and away from the router, leaving a smooth bottom surface.

  • Brand: Whiteside Router Bits
  • ASIN: B000HPYOJ6
  • UPC: 785533364743

Flush Trim Router Bit JESTUOUS 1/4 Inch Shank 1/4 Cutting Diameter with Bottom Bearing and Double Flute

Flush Trim Router Bit JESTUOUS 1/4 Inch Shank

Specs Material: Carbide cutting diameter: 1/4 inch Bearing diameter: 1/4 inch Cutter height: 3/4 inch Number of flutes: 2 Shank diameter: 1/4 inch Overall length: 2-11/16 inch Application Use these flush trimming bits for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The high-density carbide and titanium composition stands up to repeated use and is designed to produce clean, safe cuts every time. The durable carbide body is Computer Balanced for less vibration and a clean profile. Ideal for making copies of a master workpiece, it provides a controlled, splinter-free trim on all types of wood and laminates. Make sure to keep your bearings lubricated and efficient, the state in which your bearing is determines how effective it will be at laminating the edges of hardwood pieces. Do not run the router bit too slowly, otherwise they bog down in the material, friction builds up and they can get to hot to be broken. Tips 1.All the router bits designed by clockwise rotation. 2.Dont use it on non-wood material and metal,for example,steel,hard metal,stone,s...

  • Brand: JESTUOUS
  • ASIN: B078SRGKZQ
  • UPC: 743447543074

Bosch RBS020SXW 3 Pc. Laminate Trim Router Bit Set

Bosch RBS020SXW 3 Pc. Laminate Trim Router Bit

Includes 3/8-In x 1/2-in, 3/8-In x 1-in, and 1/2-in x 1-in flush trim bits, which are micro-grain carbide Tipped for longer life and have a Shear angle for an extra clean finish and a smoother cut. Use these bits for smooth trimming of laminates, veneers, and other materials.

  • Brand: Bosch
  • ASIN: B06X173N7D
  • UPC: 000346465457

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch

This tough, versatile, fast-cutting CMT Flush trim bit is ideal for a wide variety of trimming jobs. For precision work on laminates or for quick template work with excellent finish results. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4NQY8
  • UPC: 100076882026

Bosch 85216M 1/2 In. x 1 In. Carbide Tipped 3-Flute Flush Trim Bit

Bosch 85216M 1/2 In. x 1 In. Carbide

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra smooth finish. The fully hardened and tempered steel shank provides ultimate durability.

  • Brand: Bosch
  • ASIN: B0009H5PP4
  • UPC: 000346049220

CMT 806.096.11 Flush Trim bit, 1/4-Inch Shank, 1/2-Inch Cutting Length, Carbide-Tipped

CMT 806.096.11 Flush Trim bit, 1/4-Inch Shank, 1/2-Inch

This tough, versatile, fast-cutting CMT Flush trim bit is ideal for a wide variety of trimming jobs. For precision work on laminates or for quick template work with excellent finish results. This bit features super-strength superior steel body, Non-Stick Orange Shield Coating and cutting edges made of SinterHip Hi-Density Industrial Chrome Carbide for a long-lasting performance. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands.

  • Color: Orange
  • Brand: CMT
  • ASIN: B000P4LOME
  • UPC: 664252002085
Similar Laminate Flush Trim Carbide Router Results