L56S Series 10' (3.05m) Series Standard Square Base Shoe Drilled With 9/16" Holes Pattern "D" for 9/16" Laminated Tempered Glass

L56S Series 10' (3.05m) Series Standard Square Base

Length: 10 ft (3.05 m)Hole Size: 9/16" (14.3 mm)Counter Bore X Depth: 7/8" (22.2 mm x 1/2" 12.7 mm)Stock Length: 120" (3.05 m)For 9/16" (13.52 mm) Laminated Tempered Glass (6 x 1.52 x 6 mm)Typically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL96X TAPER-LOC Taper Sets Custom Cutting and Mitering Service Available EngineThe CRL L56S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 9/16" (13.52 mm) Laminated Tempered Glass (6 mm x 1.52 mm x 6 mm)Thickness Range: 0.497" (12.62 mm) to 0.549" (13.94 mm)Important NotesCRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Befo...

  • Brand: CR Laurence
  • ASIN: B006JFNZCK

Mill Aluminum 118-1/8" (3 m) L25S Series Standard Square Base Shoe Un-drilled for 25.52mm Laminated Tempered Glass

Mill Aluminum 118-1/8" (3 m) L25S Series Standard

Length: 118-1/8 in (3 m)Counter Bore X Depth: Extrusion Only (Without Holes)Stock Length: 118-1/8" (3 m)For 1-1/16" (25.52 mm) Laminated Tempered Glass (12 x 1.52 x 12 mm)Typically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL10X TAPER-LOC Taper Sets Engineering Reports Available Custom Cutting and MitThe CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 1-1/16" (25.52 mm) Laminated Tempered Glass 1/2" x .060 x 1/2" (12 mm x 1.52 mm x 12 mm)Thickness Range: 0.960" to 1.060" (24.40 to 26.92 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glassImportant NotesCRL does not recommend direct powder coating of this base shoe extrusion.Powder coated cladding applied over the base shoe is the...

  • Brand: CR Laurence
  • ASIN: B006JFO4CK

C.R. LAURENCE L25S10D CRL L25S Series 118-1/8" (3 m) L25S Series Standard Square Base Shoe Drilled with 13/16" Holes Pattern "D" for 1-1/16" (25.52 mm) Laminated Tempered Glass

C.R. LAURENCE L25S10D CRL L25S Series 118-1/8" (3

Length: 118-1/8 in (3 m)Hole Size: 13/16" (20.6 mm)Counter Bore X Depth: 1-1/4" (31.7 mm) x 1/2" (12.7 mm)Stock Length: 118-1/8" (3 m)For 1-1/16" (25.52 mm) Laminated Tempered Glass (12 x 1.52 x 12 mm) Pre-Drilled in 3 Meter (118") LengthsTypically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL10X TAPER-LOC Taper Sets Engineering Reports Available Custom Cutting and MitThe CRL L25S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 1-1/16" (25.52 mm) Laminated Tempered Glass 1/2" x .060 x 1/2" (12 mm x 1.52 mm x 12 mm)Thickness Range: 0.960" to 1.060" (24.40 to 26.92 mm) Will work with ASTM 1" (25.4 mm) Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 1-1/16" (27 mm) glassImportant NotesCRL does not recommend direct powder coating of this base sho...

  • Brand: CR Laurence
  • ASIN: B006JFO3PI

Mill Aluminum 10' L56 Series Standard Square Base Shoe Un-drilled for 9/16" Laminated Tempered Glass

Mill Aluminum 10' L56 Series Standard Square Base

Length: 10 ft (3.05 m)Counter Bore X Depth: Extrusion Only (Without Holes)Stock Length: 120" (3.05 m)For 9/16" (13.52 mm) Laminated Tempered Glass (6 x 1.52 x 6 mm)Typically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL96X TAPER-LOC Taper Sets Custom Cutting and Mitering Service Available EngineThe CRL L56S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 9/16" (13.52 mm) Laminated Tempered Glass (6 mm x 1.52 mm x 6 mm)Thickness Range: 0.497" (12.62 mm) to 0.549" (13.94 mm)Important NotesCRL does not recommend direct powder coating of this base shoe extrusion.Powder coated cladding applied over the base shoe is the recommended method.

  • Brand: CR Laurence
  • ASIN: B006JFNZTS

CRL L68S Series 118-1/8" (3m) Laminated Square Base Shoe by CR Laurence

CRL L68S Series 118-1/8" (3m) Laminated Square Base

Counter Bore X Depth: 1-1/4" (31.7 mm) x 1/2" (12.7 mm)Hole Size: 25/32" (20 mm)Stock Length: 118-1/8" (3 m)For 11/16" (17.52 mm) Laminated Tempered Glass (8 x 1.52 x 8 mm) Pre-Drilled in 3 Meter (118") LengthsTypically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL96X TAPER-LOC Taper Sets Custom Cutting and Mitering Service Available EngineThe CRL L68S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns andfasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 11/16" (17.52 mm) Laminated Tempered Glass (8 mm x 1.52 mm x 8 mm)Thickness Range: 0.666" (16.92 mm) to 0.713" (18.12 mm)Important NotesCRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole dril...

  • Brand: CR Laurence
  • ASIN: B006JFLWES

L68S Series 11-13/16" Laminated Square Base Shoe - No Holes

L68S Series 11-13/16" Laminated Square Base Shoe -

Hole Size: 25/32" (20 mm)Counter Bore X Depth: 1-1/4" (31.7 mm) x 1/2" (12.7 mm)Stock Length: 118-1/8" (3 m)Typically Used as the Base Channel for Glass Railing Systems or WindscreensCustom Cutting and Mitering Service AvailableWorks With LTL96X TAPER-LOC Taper SetsThe CRL L68S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns andfasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 11/16" (17.52 mm) Laminated Tempered Glass (8 mm x 1.52 mm x 8 mm)Thickness Range: 0.666" (16.92 mm) to 0.713" (18.12 mm)

  • Brand: CR Laurence
  • ASIN: B006JFLW0M

CRL L68S Series 11-13/16" Laminated Square Base Shoe by CR Laurence

CRL L68S Series 11-13/16" Laminated Square Base Shoe

Hole Size: 25/32" (20 mm)Counter Bore X Depth: Extrusion Only (Without Holes)Stock Length: 118-1/8" (3 m)For 11/16" (17.52 mm) Laminated Tempered Glass (8 x 1.52 x 8 mm)Typically Used as the Base Channel for Glass Railing Systems or WindscreensWorks with LTL96X TAPER-LOC Taper Sets Custom Cutting and Mitering Service Available EngineThe CRL L68S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns andfasteners. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATIONS:For use with 11/16" (17.52 mm) Laminated Tempered Glass (8 mm x 1.52 mm x 8 mm)Thickness Range: 0.666" (16.92 mm) to 0.713" (18.12 mm)Important NotesCRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method.All pre-drilled CRL Base Shoes have a +1/8 (3mm) / -1/16 (1.5mm) tolerance between each hole drilled in the base. Before drilling installa...

  • Brand: CR Laurence
  • ASIN: B006JFLVQC

CRL Brushed Stainless End Caps for L68S Series Laminated Square Base Shoe by CR Laurence

CRL Brushed Stainless End Caps for L68S Series

Color: Brushed StainlessGA./THK.: 20/.035"Grade: 316Gauge/Thickness: 20/.035"Adhere with Cladding Tape or Silicone SealantAvailable in Four Architectural FinishesCRL End Caps are available in four architectural finishes. They can be secured to the Base Shoe using Cladding Tape or Silicone Sealant. CRL Cladding Tape and CRL Silicone Sealant come with instructions. Comes one per package.

  • Brand: CR Laurence
  • ASIN: B006JCOKEU

HOMCOM 33” Square Tufted Storage Ottoman Bench Footrest (Grey, Fabric)

HOMCOM 33” Square Tufted Storage Ottoman Bench Footrest

A clean-lined design and neutral-toned upholstery makes this piece the perfect choice for contemporary decors as it brings both modern style and essential storage space. It features a beautiful stitched linen fabric exterior with button tufting. The top opens on both sides to reveal a roomy interior that allows you to store any loose items like remote controls or extra pillows and blankets. With a durable wooden frame, this ottoman is great for sitting or resting your feet on. As versatile as it is stylish, this elegant piece of furniture is a must-have for your home.Features: - 33" tufted ottoman storage bench - Linen fabric and subtle stitching gives it a classy designer look - Dual hinged top opens to reveal storage space for assorted items - Padded top designed for comfort and as a stylish sitting area - Durable wood-finished base holds up to 265 pounds of weightSpecifications: - Color: Grey - Material: Linen Fabric, Foam, Laminated Board, Birch Wood - Weight Capacity: 265 lbs - Overall Dimensions: 33" L x 33" W x 18.5" H - Storage Dimensions: 29.5" L x 29.5" W x 6" H - Net Weight: 34 lbs

  • Color: Grey
  • Brand: HOMCOM
  • ASIN: B077Z27LKQ
  • UPC: 842525115315

Mill Aluminum 118-1/8" (3 m) L21S Series Standard Square Base Shoe Un-drilled for 21.52mm Laminated Tempered Glass

Mill Aluminum 118-1/8" (3 m) L21S Series Standard

Length: 118-1/8 in (3 m)Stock Length: 118-1/8" (3 m)Counter Bore X Depth: Extrusion Only (Without Holes)For 27/32" (21.52 mm) Laminated Tempered Glass (10 x 1.52 x 10 mm)Typically Used as the Base Channel for Laminated Glass Railing SystemsDrilled and Counter Bored, or We Will Custom Drill to Your Specifications Custom Cutting and Mitering Service The CRL L21S Series Laminated Square Base Shoe is used as the base channel for glass railing systems. It can be clad in four choices of architectural finishes. The most critical component in a railing system is the proper attachment of the Base Shoe to the substrate. CRL has engineered a variety of attachment methods, and has developed an acceptable combination of drilling patterns and fasteners. The five engineered methods of attachment can be found on pages 160R to 161R, and associated fasteners are shown on pages 165R to 167R in our CRL63R catalog. A printed brochure with instructions, installation hints, cleaning, and refinishing techniques is available.GLASS SPECIFICATION:For use with 27/32" (21.52 mm) Laminated Tempered Glass (10 mm x 1.52 mm x 10 mm)Thickness Range: 0.803" to 0.903" (20.40 to 22.94 mm) Will work with ASTM 7/8" Monolithic Tempered Glass Will not accommodate the full ASTM thickness range for 27/32" glassImportant N...

  • Brand: CR Laurence
  • ASIN: B006JFO2YK
Similar Laminated Square Base Shoe Results