EEEKit Super Starter Kit for Arduino UNO R3, Suitable for DIY Enthusiasts and School Teaching Kit with UNO Board, Breadboard, Resistor, LCD, USB Cable

EEEKit Super Starter Kit for Arduino UNO R3,

Product Description Package Includes: 1 x Starter Kit for Arduino UNO R3. Please note that EEEKit and are the only sellers on Amazon that are authorized to sell products with the EEEKit name. Buy from sellers EEEKit or to ensure authenticity and better service.Product Specification: Net Weight: 18.1oz(513g) Size: 9.06" x 6.3" x 2.36"

  • Brand: EEEKit
  • ASIN: B07KKFD16G

Datacomm Electronics 50-6623-WH-KIT Flat Panel TV Cable Organizer Kit with Power Solution

Datacomm Electronics 50-6623-WH-KIT Flat Panel TV Cable Organizer

DataComm Electronics’ easy to install Flat Panel TV Cable Organizer Kit w/ Duplex Power Solution is used to install power and hide audio/video cables in the wall behind your wall mounted TV, amplifier, and other audio/video devices. This power kit allows you to pass low voltage cables and power through the wall, creating a professional, clean look for your home theater.

  • Color: White
  • Brand: Datacomm Electronics
  • ASIN: B00JJ57CR6
  • UPC: 660559010167

SS-Tech Universal LCD Monitor Driver Board Kit w/ Keypad VGA Cable Built-in 23 Programs Support 10-42'' LVDS Screen

SS-Tech Universal LCD Monitor Driver Board Kit w/

Attention: Do not provide technical support. You should know how to use it. If not ,think twice about your order please, thanks! The kit surpport most kinds of screen, but not all. Some needs different cables. So you must know if can be used and how to use, Please!! Built-in 23 Programs, which can support most (not all) LVDS screen. Instructions has been marked on the back of driver board. Support:10-42'' LVDS screen Resolution: support to 1920*1200 Input: 12V Package included: Driver Board*1. VGA cable*1. keypad *1. LVDS cable(30pin double 8 bit )*1. DC Input cable*1(no user manual)

  • Brand: S-Tech
  • UPC: 601308688381

Neewer NW-670 TTL Flash Speedlite with LCD Display Kit for Canon DSLR Cameras,Includes:(1)NW-670 Flash,(1)2.4 GHz Wireless Trigger with C1/C3 Cable,(1)Soft/Hard Diffuser+(1)Lens Cap Holder

Neewer NW-670 TTL Flash Speedlite with LCD Display

- Neewer NW670 (The second generation of VK750 II) E-TTL Speedlite Flash - Compatible with E-TTL Canon flash automatically. - It has wide angle diffusor and a built-in reflection panel. - Features a wireless trigger sensor for slave flash usage. - Charging socket for external power pack: adds a charging socket for external power pack. - PC synchronous port:simple for you to use the PC synchronous line. - Automatic temperature detection - Recycle time:Approx.3s - Rotation angle:Vertical: -7 to 90 degrees; Horizontal:0 to 270 degrees- 2.4 GHz Wireless Flash Trigger with Remote Shutter Function -It provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos. - 3-in-1 wireless remote control for camera, speedlite and studio flash. - 16 Channels Selectable - Sync speed up to 1/250s - Transmitter power:2 x AAA battery. - Receiver power:2 x AAA battery- Cable- C1 + Cable- C3 Connecting Cords for Remote Control - Provides the convenience of a wireless camera shutter release. - Camera connecting cords for remote controls with 2.5mm socket- Flash Diffuser - Soft Flash Diffuser:spreads and softens the light emitted from your flash unit,bouncing off ceilings and walls, instead of coming from a single concentrated lig...

  • Color: Grey
  • Brand: Neewer
  • ASIN: B00O9S2VSS
  • UPC: 803201285425

Legrand - Wiremold CMK70 Flat Screen TV Cord and Cable Power Kit, Recessed In-Wall Cable Management System with PowerConnect, White.

Legrand - Wiremold CMK70 Flat Screen TV Cord

Tidy up your entertainment system with this power kit that features a pre-wired design for easy installation. All the tools you need to conceal cables for a neat appearance are included. No Electrical termination required: Plug and Play. SIMPLE AND EASY INSTALLATION: No electrician or hard wiring involved Installation could be done within 30 Minutes. STEP FOR INSTALLATION: Prior to drilling any holes in the wall, verify the plug from the television will plug into the top assembly. Determine the mounting location between the studs. The CMK70 Power Kit is designed to fit into both interior and exterior walls constructed of a minimum of 2" x 3" studs and 1/2" inch drywall. Measure and mark the center of each hole location. The top and bottom assemblies can be located a maximum of 5 feet apart within the same wall cavity. Assemble the 3-inch hole saw. Using either a power drill or the handle, drill a hole at each of the 2 pre-determined locations. Assemble the 3 sections of the fish tape together using the provided connectors and fish hook. Starting at the bottom hole, insert the fish tape to the upper hole. Hook the wire of the Power Harness to the fish hook and pull through the wall until it protrudes through the bottom hole. Unsnap the trim ring from the pre-assembled upper mod...

  • Color: White
  • Brand: Wiremold
  • ASIN: B006K3CM4S
  • UPC: 086698000508 USB Voltage and Current Tester Kit - USB Voltage and Current Meter LCD Display & LED Light - USB Fast Charge Adapter USB Voltage and Current Tester Kit -

Make sure your USB devices are getting a proper chargeThe diagnostic kit lets you monitor the voltage and current being delivered to your device while it’s charging, which makes it easy to test different power supplies such as wall and car chargers, computer USB ports, mobile charging banks, and charging stations. It’s the perfect diagnostic tool for any test lab or repair facility, because you can monitor the current and voltage consumption of your Apple or Android devices against various power supplies, in order to determine if there’s an issue with a specific charger, cable or battery. You can set the tester to either display the voltage or the current reading, depending on your preference. You can also set it to alternate between showing the voltage and the current, so you can keep an eye on both measurements without having to adjust the tester. Save time by charging your devices fasterYou can quickly charge your devices using the adapter’s built-in fast-charge feature, when you’re charging your devices from a USB port on your laptop. The adapter speeds up charge time by using your computer USB host port as a charge-only port, enabling you to charge your mobile devices as if you were using an AC wall charger. Secure ChargingThe fast-charge mode also provides secure ...

  • Color: Black
  • Brand: StarTech
  • ASIN: B018Z7E05K
  • UPC: 065030863285

PowerBridge TWO-PRO-6 Dual Power Outlet Professional Grade Recessed In-Wall Cable Management System for Wall-Mounted Flat Screen LED, LCD, and Plasma TV's

PowerBridge TWO-PRO-6 Dual Power Outlet Professional Grade Recessed

Introducing the all new TWO-PRO in-wall dual outlet power and cable management system from Power Bridge. Perfect for motorized mounts. Same size as standard dual and single wall plates and designed to simplify wiring behind wall-mounted flat-panel TVs, this discreet system allows low voltage cables and wires to be routed through the wall for a clean look. The TWO-PRO is fully code-compliant to install power, and includes hardware and helpful mounting template to make the TWO-PRO the perfect do-it-yourself solution for any skill level, without the need for an electrician.

  • Color: White
  • Brand: PowerBridge Solutions
  • ASIN: B00HIYAD58
  • UPC: 855877002967

Parts Express Advanced Network Ethernet LAN Install Tool Kit with LCD Cable Tester Hunter and Case

Parts Express Advanced Network Ethernet LAN Install Tool

Professionally install, troubleshoot, or repair home or business networking systems with the NF-1504 tool kit.

  • Brand: Parts Express
  • ASIN: B07BQKZW28
  • UPC: 848864050584

AUTO-VOX M1 4.3'' TFT LCD Monitor Backup Camera Kit, Easy One-Wire Installation, IP 68 Waterproof Camera for Truck, Sedan

AUTO-VOX M1 4.3'' TFT LCD Monitor Backup Camera

Most of the wired Monitors have the complex wiring problem, most of the wireless car monitors have the unstable signal transmission problem. The M1 Rear view Monitor is designed with stable signal transmission and one wire easy installation.   Installation Steps:   1. Install the backup camera by connecting the camera red wire with reversing light and black wire with ground (metal part on the car).   2. Route the video cable from back to front.   3. Find a suitable place and fix the Monitor on windshield or dashboard as you like   4. Connect the Monitor wire to the video cable and done!   Superior Quality Night vision Waterproof Camera IP68 waterproof camera enables to work well at rainy days Extra low illumination night vision camera performs well at night.   Reusable and durable Bracket Mount 360 degree Rotation enable to mount the monitor on windshield or dashboard as you like.  Washing the dirt from the holder bottom and wait till it is dry, it becomes sticky again.   Monitor Specification: Monitor Screen Size: 4.3-inches Supply voltage: DC10.5V-15V (12V normal) TV system: PAL or NTSC system (auto-convert) Monitor Resolution: 480*272 RGB Power Mode: Automatic on when video signal received   Camera Specification: Supply voltage: DC12V normal Image device: ...

  • Color: Backup Camera Kit
  • Brand: AUTO-VOX
  • ASIN: B071D9TWSG

HP Inc. LCD Display Cable KIT LCD, 500961-001

HP Inc. LCD Display Cable KIT LCD,

  • ASIN: B008L346U8
Similar Lcd Cable Kit Results