Elecrow 5 inch Capacitive Touch Screen 800x480 TFT LCD Display HDMI Interface Supports Raspberry Pi 2B 3B 3B+ BB Black, Banana Pi Windows 10 8 7

Elecrow 5 inch Capacitive Touch Screen 800x480 TFT

Introduction This 5 inch HDMI capacitive touch screen LCD supports various systems with resolution of 800×480. Broadly you can apply it to mini PCs (Raspberry Pi/BB Black/Banana Pi), desktop PCs and game console. When works with Raspberry Pi, supports Raspbian, Ubuntu, Kodi, WIN10 IOT, single touch, and free driver. When work as a computer monitor, supports Windows 10//8/7, 5 point touch (XP and older version system: single-point touch), free driver. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc. Product Parameters Size: 5.0 (inch) Resolution: 800 × 480 (dots) Touch: Support 5 point capacitive touch Audio output: support Dimensions: 121.11*95.24(mm) Weight: 248 (g) Package List 5 Inch Capacitive HDMI Display x1 HDMI cable x1 Micro USB Cable x1 DVDx1 Copper screws pack (4pcs) x1

  • Color: Gold
  • Brand: ELECROW
  • ASIN: B07FDYXPT7
  • UPC: 749029248764

JANSANE 20x4 2004 LCD Arduino Display Screen Blue + IIC I2C Module Interface Adapter for Arduino Uno Raspberry pi 2 Pack

JANSANE 20x4 2004 LCD Arduino Display Screen Blue

Specification: Display: 4 lines x 20 characters Backlight: Blue with white character color LCD controller: HD44780 Pin Definition: VCC/ GND/SDL and SCA Contrast Adjust: Potentiometer Backlight Adjust: Jumper Default Address: 0x27 for PCF8574T chip; 0x3F for PCF8574AT chip Working Voltage: 5V 100% Satisfaction Guarantee 12-Month Warranty; No satisfied ,Free reason for return; We could also resent you new one due to quality problem. Package: 2 pack blue 20x4 2004 lcd display + I2C serial interface

  • Color: Blue
  • Brand: JANSANE
  • ASIN: B07D7ZQVDR
  • UPC: 711102557629

GeeekPi 5 inch HDMI Monitor LCD Resistive Touch Screen 800x480 LCD Display USB Interface for Raspberry Pi 3/2 Model B/B+ & Banana Pi (Plug and Play Free Driver)

GeeekPi 5 inch HDMI Monitor LCD Resistive Touch

5 Inch 800*480 HDMI USB Plug and Play Resistive Touch Screen LCD Display for Banana Pi/PC/Raspberry Pi 2/3/B+/Android/Ubuntu/Debian/Beaglebone Black/Udoo/Compute Stick This fantastic 5 inch HDMI LCD display with USB touch screen is compatible with almost all the operating systems on the market. Utilizing pre-existing Linux/Windows/Mac drivers, this 800 x 480 touch screen will help you hit the ground running. Resistive touch function gives the user full control over any device. It supports Windows XP SP3, Windows 7, Windows 8, Windows 8.1, Windows 10, Android 4.2, Windows CE7, Ubuntu and Debian. With the built-in EDID device information, your equipment will get identified in no time. Meanwhile, its USB touch can fulfill the functions of the right mouse button and drag and drop. With the special design power circuit for this display, it requires less than 150mA current to get it running with perfect performance. We have successfully run the tests on PC, laptop, Raspberry Pi, Beaglebone Black, Udoo, Compute stick, SLR camera. Specifications: Power:5V Power via USB MicroCurrent: less than 150mADisplay Type:5 inch TFT LCDResolution: 800x480Touchscreen: USB ResistiveInterface: HDMI & USB 2.0 Full SpeedDimensions: 133mm x 76mm x 7mm Weight without package:120gWeight with package:140g P...

  • Brand: GeeekPi
  • ASIN: B01L6O2NEE
  • UPC: 703501197568

Elecrow 5 inch Touch Screen 800x480 TFT LCD Display HDMI Interface Supports Raspberry Pi 2B 3B 3B+ BB Black, Banana Pi Windows 10 8 7

Elecrow 5 inch Touch Screen 800x480 TFT LCD

Elecrow IPS TFT LCD displayThis 5 inch TFT display with touch function is a mini panel-mountable HDMI monitor. It's small and simple, and the shape makes it easy to attach to a electronic product. Although the 800x480 common HDMI display is made for Raspberry Pi, we can use it other where not only for Raspberry Pi. Features Designed for Raspberry Pi, an ideal alternative solution for monitor Supports any revision of Raspberry Pi (directly-pluggable) 800×480 resolution, better display Good touch response Large viewing angle Fast response time For Raspberry Pi 2B 3B 3B+ With detail user guide and image Specifications 5 inch TFT Resistive touch screen display, 800x480 Resolution HDMI input Usb power, 5V Lcd driver IC: ILI9486L Refresh rate: 60HZ Lcd Size: 120mm*78mm Package list 5 inch Touch LCD Display x1 HDMI connector x1 Touch pen x1 CD x 1NoteAfter install the driver that could get the touch function work.Attention: when you receive the item and try it find the screen appear BLANK WHITE, WHITE LINE, BLACK SCREEN, NO TOUCH FUNCTION and FLASHING etc, please do not worry, install the following driver will be solved.As computer monitor, the touch function will be unavailable.Tips for driver: Basic for Raspbian Jessie with PIXELStep 1:Download and Burn the Raspbian ...

  • Brand: ELECROW
  • ASIN: B013JECYF2
  • UPC: 602731537505

kuman for Raspberry Pi 3B+ TFT LCD Display, 3.5 Inch 480x320 TFT Touch Screen Monitor for Raspberry Pi Model B A+ SPI Interface with Touch Pen SC06

kuman for Raspberry Pi 3B+ TFT LCD Display,

Tips for driver: After install the driver that could get the touch function work. 1.)Step1, install Raspbian official mirror a)download Raspbian official mirror(latest version): https://www.Raspberrypi.Org/downloads/ b)use“sdformatter.Exe”to format your TF card c)use“win32diskimager.Exe” burning mirror to TF card 2.) Step2, clone My REPO onto your Pi sudo RM -RF lcd-show git clone HTTPS://github.Com/goodtft/lcd-show.Git chmod -R 755 lcd-show cd lcd-show/ 3.)Step3, according to your LCD's Type, excute:

  • Color: raspberry pi screen
  • Brand: kuman
  • ASIN: B01CNJVG8K

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry-pi A/A+/B/B+/2 B

Waveshare Raspberry Pi LCD Display Module 5inch 800480

Features 800×480 high resolution, touch control Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable) Driver provided (works with custom Raspbian directly) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Back light control to lower power consumption High quality immersion gold surface plating Package Contains 5inch HDMI LCDx1 HDMI connector x 1 Touch pen x1 RPi screws pack (4pcs) x 1 DVD x 1 Why the LCD doesn't work with my Raspbian? --To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. --However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? --Make sure the hardware connection is correct and connects fine. --Make sure the image in TF card is burnt correctly. --The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. For more info, please check the wiki page: www.waveshare.com/wiki/5inch_HDMI_LCD?amazon

  • Brand: Waveshare-Raspberry pi
  • ASIN: B00TIA0PMQ
  • UPC: 799632837756

Padarsey 5 inch Touch Screen 800x480 TFT LCD Display HDMI Interface Supports Raspberry Pi 2B 3B 3B+ BB Black, Banana Pi Windows 10 8 7

Padarsey 5 inch Touch Screen 800x480 TFT LCD

Features A good solution for those seeking for a bigger resolution display Designed for Raspberry Pi, an ideal alternative solution for monitor Supports any revision of Raspberry Pi (directly-pluggable) 800×480 resolution, better display Good touch response Large viewing angle Fast response time For Raspberry Pi B+/2B Raspberry Pi 3B With detail user guide and image Specifications 5 inch TFT Resistive touch screen display, 800x480 Resolution HDMI input Usb power, 5V Lcd driver IC: ILI9486L Refresh rate:60HZ Lcd Size :120mm*78mm Package list 5 inch Touch LCD Display x1 HDMI connector x1 Touch pen x1 CD x 1 Note After install the driver that could get the touch function work. Attention: when you receive the item and try it find the screen appear BLANK WHITE, WHITE LINE, BLACK SCREEN, NO TOUCH FUNCTION and FLASHING etc, please do not worry, install the following driver will be solved As computer monitor, the touch function will be unavailable. Tips for driver: Basic for Raspbian Jessie with PIXEL Step 1:Download and Burn the Raspbian IMG(If you have already installed the system, please jump to step2)I https://www.raspberrypi.org/downloads/raspbian/ Step 2: Open terminal and Download the driver on RPI Run: git clone https://github.com/goodtft/LCD-show.git Step 3: Install...

  • Color: 5" Raspberry Pi LCD Display
  • Brand: Padarsey
  • ASIN: B07RZYYNMZ

Waveshare Raspberry Pi LCD Display Module 4inch 320x480 (Pixel) TFT Resistive Touch Display Screen Kit SPI Interface for Rapsberry pi A/A+/B/B+/2 B/3 B

Waveshare Raspberry Pi LCD Display Module 4inch 320x480

Features Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor Supports any revision of Raspberry Pi (directly-pluggable) Driver provided (works with custom Raspbian directly) IPS technology, high quabrty and perfect displaying from very wide viewing angle 320x480 resolution Convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime Supports Raspbian system, enables your system to: Play videos (supports multi formats, MP4 and so on) Take photos by touching (up to 17 camera modes) Support software keyboard (system interaction without keyboard/mouse) Package Contains 4inch RPi LCD (A) x 1 Touch pen x 1 RPi screws pack (2pcs) x 1 Development Resources:http://www.waveshare.com/wiki/4inch_RPi_LCD_(A) If you have any question, please send message to me via Amazon, I would reply you assp

  • Brand: waveshare
  • ASIN: B00Q4OPX9Y
  • UPC: 799632837367

Tripp Lite SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS, 2U Rack/Tower, Extended Run, Pre-Installed WEBCARDLX Network Interface, LCD Display, USB, DB9 Serial (SMART3000RMXLN)

Tripp Lite SmartPro 120V 3kVA 2.88kW Line-Interactive Sine

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web brows...

  • Color: Black
  • Brand: Tripp Lite
  • ASIN: B00B5Q741G
  • UPC: 037332177896

Waveshare 7 Inch Capacitive Touch Screen LCD(C) 1024 X 600 HDMI Interface Display Shield Panel Supports Raspberry Pi/BB Black/PC/Various Systems/Raspberry Pi 3 Model B

Waveshare 7 Inch Capacitive Touch Screen LCD(C) 1024

Features 7inch IPS screen, 1024x600 hardware resolution Capacitive touch control Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computersWhen works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free Backlight can be turned off to lower power consumption Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:s Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable BB Black: HDMI cable PACKAGE CONTENT 1.7inch HDMI LCD (C) x 1 2.HDMI cable x 1 3.USB type A plug to micro B plug cable x 1 4.RPi screws pack (4pcs) x 1 5.Quick start sheet x1 FAQ 1.What should we do if there are some red lines on the edge of the screen? Please adjust the config.txt file by addding [the hdmi_drive=1] into the end of code After that please power off the srceen and put it aside for a few hours to avoid the flickers 2.What should we do if there are some ghost pictures? Please adjust the adjustable resistor on the back which we point out in the picture And after the screen can display the desktop, rotate the resistor until it can get the best display of deskto...

  • Brand: waveshare
  • ASIN: B015E8EDYQ
  • UPC: 712321341648

LCD1602 2004 20x4 LCD Display Adapter IIC//TWI/SPI/I2C Serial Interface Module Shield for Arduino UNO R3 MEGA (2 Pcs

LCD1602 2004 20x4 LCD Display Adapter IIC//TWI/SPI/I2C Serial

Features: Supply voltage: 5V Saves using up data ports on the Arduino The backlight and contrast is adjusted by potentiometer/trimmer Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable Compatible for 1602 LCD 2004 LCD.This module can drive 2 and 4 line LCD displays for Arduino With this I2C interface module, you will be able to realize data display via only 2 wires. I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself) Description: As there is limited pin on Arduino controller,your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C LCD serial interface module, you will be able to realize data display via only 2 wires. The I2C expander is address-selectable (8 values),and it provides 7 I/O ports and one switch-control port (backlight for LCDs). It attaches directly to the usual 2x and 4x LCD displays with a single controller (e.g., 4x20). The brain is a PCF8574T 8-bit I2C GPIO expander wired up for 4-bit communication with the LCD. This board is capable of reading and writing in 4-bit mode, and it also can toggle the backlight. The register layout is: D7, D6, D5, D4, BACKLIGHT (wired to V0), E (clock/enable), R/W (direction), RS (co...

  • Color: i2c lcd
  • Brand: Ardest
  • ASIN: B07D3YPK3H
  • UPC: 647726893945

LGDehome IIC/I2C/TWI LCD 1602 16x2 Serial Interface Adapter Module Blue Backlight for Arduino UNO R3 MEGA2560( pack of 2)

LGDehome IIC/I2C/TWI LCD 1602 16x2 Serial Interface Adapter

Feature: This module uses only two IO ports Blue Balcklight. Package include: 2x IIC/I2C/TWI 1602 Serial LCD module

  • Brand: LGDehome
  • ASIN: B0711WLVP9
  • UPC: 753610374374

HiLetgo 2pcs IIC I2C Serial Interface Module LCD1602 Address Changeable for Arduino 1602 LCD Display

HiLetgo 2pcs IIC I2C Serial Interface Module LCD1602

2pcs IIC I2C Serial Interface Board Module LCD1602 Address Changeable Arduino 1602/2004 I2C Interface 4-Wire 1602/2004 screen Arduino IIC/I2C Interface LCD1602/2004 adapter plate without LCD screen Arduino control board IO port is only 20, plus some sensor, SD card Han, relay modules and more, IO port is not enough, The original 1602/2004 screen requires 7 IO port can drive up, we have developed this module can help you save five IO ports, we send arduino library Product parameters: 1. Dimensions: 41.5mm (length) * 19mm (W) * 15.3mm (height) 2. Weight: 5g 3. PCB Color: Black 4. Supply Voltage :2.5-6V 5. Supports the I2C protocol 6. With backlight power control, can be connected via jumper settings are backlight power. Plug the jumper to connect the backlight off, unplug the jumper to disconnect the backlight power 7. Contrast can be adjusted by turning the blue potentiometer clockwise increase, counterclockwise weakened. Potentiometer design on the front, enabling customers to freely adjust anytime 8. Modules can be cascaded to cascade up to eight. By short-circuiting A0/A1/A2 modify the device address. The default address is 0x27. Note: Please contact us if you need the Schematic and Datasheet.

  • Color: Black
  • Brand: HiLetgo
  • ASIN: B00VC2NEU8
  • UPC: 797698770260

for Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor - 1024x600 HD LCD Display Gaming Screen, Drive Free for Raspberry Pi/Windows 10/Beagle Bone Black and Banana Pi

for Raspberry Pi 7 inch Capacitive Touch Screen

Jun_Electron is a thriving technology company who is dedicated to electronic hardware research, development, production and sale. The Screen can bring new experience for you suit for Raspberry Pi or other host board. High resolution, and FREE DRIVE for any HDMI device, Plug and Play Directly. Features: Free Drive Screen: Jun-Electron 7 inch Touch Screen gives you convenient to access most HDMI output system FREE DRIVE, and Plug and Play directly avoid the trouble to setting 'config' when match raspberry pi, easy to create customized projects. Support Raspberry Pi office system Raspbian, Kali, Ubuntu, Retropie directly, also can used as a computer monitor, support 10/8/7, Touch works, free driveParameter:LCD Size: 7.0 inch (Diagonal)High Resolution: 1024 x 3(RGB) x 600Driver Element: Free Drive for HDMI hostDisplay mode: Normally White ,TransmissiveSSD1963 touch panel controllerDot pitch: 0.0642(W) X 0.1790(H)mmSurface Treatment: Anti-glareColor arrangement: RGB-Stripe Interface: DigitalBlack light: Highlighted LED lamp back lightingTFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin's voltage on the moduleCan not be more than 3.3V.Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V. Interface Type: 16 para...

  • Color: 7 inch Screen
  • Brand: Jun-Electron
  • ASIN: B07QKSSQ66

WINGONEER 5PCS IIC I2C TWI SPI Serial Interface Board Module Port for Arduino LCD1602 Display

WINGONEER 5PCS IIC I2C TWI SPI Serial Interface

WINGONEER trademark Reg.NO:4747611Features:This is another great IIC/I2C/TWI/SPI Serial Interface.As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after£¬connected with a certain quantity of sensors or SD card.However, with this I2C interface module, you will be able to realize data display via only 2 wires.If you already has I2C devices in your project, this LCD module actually cost no more resources at all.It is fantastic for Arduino based project.I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)Supply voltage: 5Vthe backlight and contrast is adjusted by potentiometerCome with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cableI2C Address: 0x27 (I2C Address: 0X20~0X27 (the original address is 0X27,you can change it yourself)Compatible for 1602 LCDWeight:5gSize:5.5x2.3x1.4cmPackage Contents:5x WINGONEER IIC/I2C/TWI/SPI Serial Interface Module Port

  • Brand: WINGONEER
  • ASIN: B06XHGYYWB
  • UPC: 723466639125
Similar Lcd Display Interface Results