Evolution DISCCUT1 12" Disc Cutter, Orange

Evolution DISCCUT1 12" Disc Cutter,

Evolution's electric disc Cutter easily cuts concrete, Stone, brick, and paving, even reinforced concrete, With the supplied 12" Diamond blade. The powerful 15amp/ 1800W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas. The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple. The ideal alternative to high maintenance, gasoline-powered disc cutters

  • Color: Orange
  • Brand: Evolution Power Tools
  • ASIN: B003K4FQ6G
  • UPC: 849713028099

Billet Engine Swap Bracket SBC LS Conversion Motor Mount Adjustable Plate LS1 LS3 Adapter Motor 551628

Billet Engine Swap Bracket SBC LS Conversion Motor

LS Engine Swap / Engine Mount Brackets   These brackets allow a LS series engine to be bolted into a vehicle that originally had a small block chevy engine Re-use your small block engine mounts (3 bolt flange mounts, see additional photos), then bolt them to these ICT adapters using the included M10 hardware. Made with OEM specifications for the best possible fitment into your vehicle These plates will move the crankshaft centerline up .17" in the vehicle  Made in Wichita, KS from aerospace grade, USA 3/8" billet aluminum Includes: 2 adapter plates, 8 flat head bolts, and 6 flange M10-1.5 bolts Natural aluminum finish See our other listings for all your LS swap needs. Check out our "Tips and Guides" section on our page    There are 4 positions for maximum adjustment of engine (from .100" forward of OEM bellhousing position [due to bolt interference, OEM location is not possible for any brand of flat style swap plates] ~forward most position shown in photos~,  Secondary positions are: .600",  1.86", and 2.36" engine moved frontward)  These swap plates will shift the crankshaft centerline up .177" above factory small block location.   At ICT Billet we use GM factory specifications to determine exact mounting locations for the most accurate engine positioning.  

  • Color: Natural
  • Brand: ICT Billet
  • ASIN: B00JU7LQ8Y
  • UPC: 682384790090

SeaSense 15 HP or Less Outboard Motor Flusher, Small

SeaSense 15 HP or Less Outboard Motor Flusher,

Fits Motors Up To 15 H.P. Slip On Design allows easy installation without removal of Prop. Allows the cooling system to be flushed out using a garden hose. Also a great way to test run your boat before heading for the water.

  • Brand: SeaSense
  • ASIN: B0019LZY5U
  • UPC: 737765737451

WEN 4208 8 in. 5-Speed Drill Press

WEN 4208 8 in. 5-Speed Drill

Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

  • Color: One Color
  • Brand: WEN
  • ASIN: B00HQONFVE
  • UPC: 044459042082

LSX Innovations AL12 LS1 Conversion Motor Mount Adapter Plates Billet Aluminum

LSX Innovations AL12 LS1 Conversion Motor Mount Adapter

Our Chevy LS Swap Plates have a necessary opening milled out of the center of the plate to clear the hump on the backside of your SBC/BBC motor mounts. The other guys don't provide you with this opening, so in order to for everything to fit flush, you either have to grind down their adapter plates, or grind down your motor mounts. We feel that your purchase is worth us taking the extra time to do it for you.Our non-adjustable LS Swap Plates move your LS motor forward one inch from the original Chevrolet SBC/BBC location. Most LS swaps fit best in this location due to firewall clearance issues. We do offer adjustable LS swap motor mounts, and highly recommend them to accommodate the widest variety of header, oil pan, cross member, and steering box combinations.Our LS Swap Plates are CNC machined right here in the USA to hold the tightest tolerances possible. We strive to provide the highest quality products on the market to give our customers the best value in the LS swap market. All of our LS swap parts are made in house for the highest quality control on the LS swap industry.We specialize in Chevrolet LS engine swaps into Nova,Camaro, Chevelle, Impala, G body, and Chevy pickups. Contact us today for all your LS Swap needs.These ls swap plates will not work with low mount AC comp...

  • Brand: LSX Innovations
  • ASIN: B017BV5H0S

Makita RT0701CX7 1-1/4 HP Compact Router Kit

Makita RT0701CX7 1-1/4 HP Compact Router

Makita's powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance. The variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application. Our smooth rack-and-pinion fine depth adjustment system for more precise settings. It features a slim and ergonomically designed body for increased comfort and control. It has a Quick release cam lock system for easy depth adjustments and base removal/installation The Electronic speed control maintains constant speed under load. It also has a Soft start feature for smooth start-ups. The Fixed base accepts industry standard template guides for convenience. It has a High visibility base design for improved handling and the performance base can be removed quickly to install other bases. The Heavy duty aluminum motor housing engineered for increased durability. The Shaft locks for quick and easy bit changes It's Durable flat top design is added for convenience when changing bits. It has a Non-marring high-durability base insert for increased work piece protection. It also has Easy-to-read depth scales Uses 1/4" shank router bits Double insulated.

  • Color: As shown in the picture
  • Brand: Makita
  • ASIN: B00HAQMHEO
  • UPC: 700735727967

Chevy-to-BOP GM Turbo-Hydramatic Transmission Adapter Plate

Chevy-to-BOP GM Turbo-Hydramatic Transmission Adapter

Turbo-Hydramatic GM Transmission Adapter PlateAdapts 1966-up Olds, Buick, Pontiac, & Cadillac Turbo 350 and Turbo 400 (TH350 or TH400) automatic transmissions to 1962-up Fits Chevy engines (or vice versa). Will also adapt a 700R4 to a '70-'77 Pontiac 455 (however will not work on the smaller belhousings supplied on the 2.5, 2.8, and 3.1 liter engines).Includes adapter plate and bolts. Approximately 1/8" thick.

  • Brand: Speedway Motors
  • ASIN: B079PTHLSW

WEN 6534 8-Amp Electric Hand Planer, 4-3/8-Inch

WEN 6534 8-Amp Electric Hand Planer,

Remember when you needed to smooth out those joists? Plane away chips, splinters, and misshapen edges with the WEN 8-Amp 4-3/8 Inch Electric Hand Planer. Take on 2x4s and 4x4s with the spacious 4-3/8-inch cutterhead. Perfect for fixing stubborn doors and fitting wood. This power planer’s 8-amp motor delivers over 32,000 cuts per minute to your workpiece, slicing away any irregularities until the surface of your boards are aligned and smooth. With a cutting width of 4-3/8 inches and a maximum cutting depth of 1/8 of an inch, you’ll have the perfect companion for fitting and squaring boards. The 16 positive stops go from 0 all the way up to 1/8 of an inch in 1/128 inch intervals. The base plate shoe even includes two v-shaped chamfer grooves for easily flattening sharp post corners. The onboard kickstand protects both the blade and the workpiece by keeping the blade elevated and out of contact from the surface of your project in-between cuts. Finally, the dust adapter combined with the two-way dust port helps users manage loose shavings, keeping your work space clean and sawdust free. The included rabbeting guide helps create rabbets in your boards while the parallel fence bracket keeps your planer traveling perfectly straight. And because this is a WEN Product, your 8-Amp 4-3/...

  • Brand: WEN
  • ASIN: B079FH788Z
  • UPC: 044459065340

Autoslegend for Ford Mustang Swap Adapter Plates Motor Mounts with 4.8L 5.3L Blocks

Autoslegend for Ford Mustang Swap Adapter Plates Motor

Applications for Ford Mustang 1979-2004 for Ford Mustang W/4.8L, 5.3L, 6.0L, LS1, LS2, LS3, LS6, LS7, LS9, LSX G-M Blocks Part Number 3013-102 Features * Make your LS engine swap easier with this motor mount adapter swap plates and solid 4.6 motor mount kit for your vehicle * Easy Installation * Precision Laser Cut * 1/4" Thick Mild Steel * No cutting or drilling required * All Grade 8 hardware included * Includes Solid 4.6 Motor Mounts * LS1 to 4.6 Swap with Solid Motor Mounts

  • Brand: Autoslegend
  • ASIN: B07RKHWCMN

Davis Happy Troller Small Trolling Plate f/Outboards 20-50hp

Davis Happy Troller Small Trolling Plate f/Outboards

Happy Troller-Small Plate. Small Troller: Fits outboard motors from 20-50hp. For the Fisherman who thinks he has everything. Slows even big motors down to that "ever-so-slow" fish tantalizing speed. A significant invention in the sport of troll fishing, Happy Troller mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat's stability is enhanced. Locks in "down" position for trolling. Locks in "up" position for cruising. Happy Troller is the answer to correct trolling speed. Use it year-round in all boating activities salt and fresh water. Key Reduces troll speed in "down" position. Acts as a stabilizer in "up" position. Maintains stability in bow-light boats. Smooths out ride in rough water. Reduces porpoising and cavitation. Made of only highest quality stainless steel and marine aluminum clear anodized aluminum finish. Installs in 15 minutes. Stainless steel mounting hardware and installation & operating instructions provided with each unit

  • Brand: Davis Instruments
  • ASIN: B009DY525C
  • UPC: 611104316425

Makita JN1601 5 Amp 16 Gauge Nibbler

Makita JN1601 5 Amp 16 Gauge

This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2.

  • Color: Blue
  • Brand: Makita
  • ASIN: B000TKRLS0
  • UPC: 088381015448

B&M 30497 Trans Case Adapter

B&M 30497 Trans Case

This B&M Racing transmission bellhousing adapter plate was developed to bolt a Buick, Oldsmobile or Pontiac TH350,TH400 or TH700R4 transmission on Chevrolet small block big block engines manufactured after 1962. Does not fit late model LS or LS based LT engines. The heavy gauge adapter plate is laser cut to exacting tolerances for a precise fit, then powder coated with a premium black finish. Also features the iconic B&M name laser cut in the plate. Includes hardware to mount the adapter plate to the transmission and installation instructions. Made in the USA.

  • Color: Black
  • Brand: B&M
  • ASIN: B07561N3WV
  • UPC: 019695953089

Dremel 335-01 Plunge Router Attachment

Dremel 335-01 Plunge Router

  • Color: Multi
  • Brand: Dremel
  • ASIN: B0000DEZK4
  • UPC: 080596022617

XKMT-Twin-Cam 88A Engine Rear Motor Adapter Plate Mount Compatible With Harley Evolution Twin Cam [B07BDG46K3]

XKMT-Twin-Cam 88A Engine Rear Motor Adapter Plate Mount

Adapts a Twin Cam "A" Motor to EVO & Custom FramesBy using this adapter plate, a T/C-88 motor can be used in any frame designed for a EVO motor. EVO top motor mounts, transmissions, primary drives, & exhaust systems can be used Fitment: 1999-2006 Harley Twin Cam motor

  • Color: Same as picture show
  • Brand: XKMT-MOTORPARTS
  • ASIN: B07BDG46K3
  • UPC: 679042426194

Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2"

Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft

The Sealproof® Power Whip Assembly is assembled with all UL components. Designed for easy installation, it resists corrosion, oil, and water, as well as being sunlight and outdoor resistant. A time and money saving convenience for installation of your A/C hook up.

  • Brand: Sealproof
  • ASIN: B0756N989G
  • UPC: 658746851266
Similar Motor Adapter Plate Results