Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30, Easy to Use - Trial Size 2.8 lb
Smooth-On Silicone Mold Making, Liquid Rubber OOMOO 30,
Use this silicone mold making rubber for making perfect reproductions that capture intricate detail of original models. OOMOO 30 is easy to use silicone rubber compounds that feature convenient one-to-one by volume mix ratios (no scale necessary). Very low viscosity for easy mixing and pouring and vacuum degassing is not necessary. Cures at room temperature with negligible shrinkage. OOMOO 30 has a 30-minute pot life, with a six-hour cure time. For the novice mold maker - OOMOO30 does not have great tear strength. They are good for making simple one- or two-piece block molds. OOMOO30 is suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Technical Information Mixing Ratio: one to one by volume (100a:130b by weight) Pot Life: 30 min. Demold: 6 hrs. Color: lavender properties (part a and b mixed) Viscosity: 4,250 cps g/cc: 1.34 Cu. In./Lb.: 20.6 Tensile Strength: 240 psi Elongation at Break: 250% Die C Tear Strength: 40 pli Compression Set: 37% Shrinkage: .0025 In./In. Net weight 16 oz. (454 Grams) For Best Results: Store and use silicone products at room temperature. If material freezes, silicone base will become very thick. Simply allow product to get down to room tempe...
- Color: Blue
- Brand: Smooth-On
- ASIN: B004BNF3TK
- UPC: 885241574127
Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY!
Smooth-On OOMOO 25 - FAST Curing Mold Making
Smooth-On Oomoo 25 2 Pint Kit (contains 1 pint of part A and 1 pint of Part B) OOMOO® Silicone Rubber - No Scale or Vacuum Chamber Required. OOMOO® 25 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). This silicone is easy to work with and has a very low viscosity for easy mixing and pouring. Vacuum degassing is usually not necessary. Takes excellent detail. Cures at room temperature with negligible shrinkage and good tear strength. OOMOO® 25 features a 15-minute pot life and 75 minute cure time. OOMOO® 25 & 30 are suitable for a variety of art-related and industrial applications including making molds for sculpture and prototype reproduction, casting plaster, resins and wax. Tin cure silicone. Cures to an opaque blue-lavendar. Tip: *Do not cast platinum cure silicone into Oomoo silicone or any other tin cure silicone*
- Color: Blue
- Brand: Smooth-On
- ASIN: B01C4YQ4TU
- UPC: 821079268753
Mold Star 20T Silicone Mold Making Rubber - Trial Unit
Mold Star 20T Silicone Mold Making Rubber -
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Adult Supervision Required. Keep Out of the Reach of Children.
- Brand: Smooth-On
- ASIN: B00LU4YFK6
- UPC: 751635587410
Silicone Mold Making Kit - Creative Silicone Molds for Art Projects and DIY - Includes Silicone Liquid Rubber Compound - Ideal for Copies, Home or Industrial Use
Silicone Mold Making Kit - Creative Silicone Molds
Our products are developed and tested under highest conditions, being certified by all necessary standards of quality, in order to meet the rigorous expectations of our customers. The selection of our suppliers and manufacturers is based on careful screening processes that guarantee excellent products. Why should you purchase this item? Order this silicone mold making kit for creating lovely sculptures or replicas, use them as gifts to impress your loved ones or simply to decorate your room or home, and you’ll be amazed at the gorgeous results! This silicone set can be used for industrial projects as well, its low viscosity, easy mixing and one-on-one scale being perfect for the job. Some of the amazing features of this product: Premium quality materials; Perfect for beginners and experienced; One-on-one scale; Pot life:30 minutes; Demold: 6 hours; For best results, store at room temperature. ADD TO CART NOW and you’ll fall in love instantly with this silicone mold set!
- Brand: Beckly
- ASIN: B07FXBTC1Z
- UPC: 754235562863
Crafter's Companion A20501 Amazing Casting Products Alumilite High Strength 3 Liquid Mold Making Rubber, 1-Pound, Pink
Crafter's Companion A20501 Amazing Casting Products Alumilite High
Alumilite Corp-High strength 3 liquid mold making rubber: pink. Perfect to use when you have the deepest undercuts! the high strength rubber is thin enough that it will pick up all the detail of your original without the need for vacuum or pressure casting. This package contains one pound of flexible mold-making rubber mix. Complies with ASTM d 4236-94 and LHAMA. Made in USA.
- Color: Pink
- Brand: Crafter's Companion
- ASIN: B004BNA6VA
- UPC: 717917211596
Simple 1:1 Mix Silicone Mold Making Rubber, AM 125 1 Gallon
Simple 1:1 Mix Silicone Mold Making Rubber, AM
This is a simple 1:1 mix Silicone Mold Making RTV designed for beginers to mold making. It is ideal for most mold making applications and cures in less than two hours. Use petroleum jelly to separate silicone when using with glass and other silicones for the best results. **Do NOT expose AM 125 to any fluctuating temperatures; AM 125 works best when kept at a constant 73 degrees F. Re-cap the containers immediately after pouring. Store AM 125 at 72F/room temperature. AM125 HAS A 60 DAY SHELF LIFE ONCE CONTAINERS ARE OPENED.** Great for first time mold makers. Widely used for making soap and candle molds. NOTE: THIS PRODUCT IS NOT ELIGIBLE FOR AMAZON FREE SHIPPING.
- Brand: AeroMarine Products
- ASIN: B0047R0LQA
- UPC: 609465398945
MoldMaking & Casting Pourable Silicone Starter Kit
MoldMaking & Casting Pourable Silicone Starter
Mold rubber can be used to capture exact detail from any model. This starter kit will allow you to make a rubber mold of a small, simple 2 or 3 dimensional model using silicone rubber. Then pour our fast cast plastic to make one or more reproductions of the original. Adult Supervision Required. Keep Out of the Reach of Children.
- Color: Bright White Casting Material
- Brand: Smooth-On, Inc.
- ASIN: B000QCHVC2
- UPC: 751635821217
Alumilite Amazing Mold Putty Kit, 0.66-Pound
Cast-A-Mold 25T Silicone Rubber (1/2 Gallon)
Cast-A-Mold 25T Silicone Rubber (1/2
RTV Silicone Mold Making Rubber for Resin CastingCast-A-Mold 25T is a general purpose rtv silicone elastomer which exhibits excellent tear strength, long library life, and accurate detail reproduction. Cast-A-Mold 25T is a condensation cured silicone (tin catalyzed ) It is used to make rubber molds that can be used to cast polyurethanes, epoxy's, polyester's, cement, concrete, soap, wax, plaster, etc.. It is easy to mix and de-air, and will cure at room temperature over virtually any surface. Cast-A-Mold 25T is extremely useful for applications where superior physical properties are required. Properties:Product: Cast-A-Mold 25T Mix Ratio: 10:1 by weight Working Time: 3.0 hours Demold Time: 16 hour Heat Deflection: 300 f + Tensile Strength, psi: 660 Elongation %: 390 Tear Resistance, ppi: 140 Color: Green Hardness: A-25 Viscosity: 40,000 cpsWe typically ship same day when orders are received by 2 pm EST Monday-Friday
- Color: blue
- Brand: specialtyresin
- ASIN: B008UW4OPC
- UPC: 661799648660
Polly Plastics Silicone Molding Putty - 1/2 Lb - for Moldable Plastic | Wax | Clay | Urethane and Epoxy Resins | Plaster
Polly Plastics Silicone Molding Putty - 1/2 Lb
Make your own Reusable Molds - the Fast and Easy way Polly Plastics Silicone Mold Putty is an easy way to make fast reliable molds that you can re-use multiple times. Just knead equal amounts of A (white) and B (blue) together and create a silicone mold by forming the putty around the object you want to replicate. Use it for soap molds, candle molds, antique furniture repair, small impression molding, jewelry making and repair, and other small object casting. You can cast many types of materials in your finished mold including moldable plastics, waxes, clays, urethane and epoxy resins and plaster. Fast Curing and Durable Our putty is non-toxic and odor free. It will handle heat up to 450 F. You have 4 minutes of working time and you are able to de-mold in 30 minutes. Self-releasing - no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications. This package contains .25 lbs. of Part A and .25 lbs. of Part B. Made in USA. Complete instructions. Keep out of reach of children. Frequently Asked Questions Can I use it to make a dental in-print? It is non-toxic but it is not approved for FDA-type applications like food contact or internal use. What materials can you fill the mold with? All common casting material...
- Brand: Polly Plastics
- ASIN: B018B4A6X2
- UPC: 683405247227
Smooth-On - Smooth-Cast 300 Liquid Plastic Compound & Mold Star 15 Slow Molding Silicone Rubber (1 Pint A & 1 Pint B)
Smooth-On - Smooth-Cast 300 Liquid Plastic Compound &
Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. The pot life of Mold Star 15 SLOW is 50 minutes and cure time is 4 hours at room temperature. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star rubbers are not intended for brush-on moldmaking. Adult Supervision Required. Keep Out of the Reach of Children.
- Color: KIT: Liquid Plastic & Liquid Rubber
- Brand: Smooth-On
- ASIN: B01D9BUVSW
- UPC: 644730140164
Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone Putty
Environmental Technology 1/2-Pound Kit Casting' Craft Easymold Silicone
Easymold silicone putty is ideal for a wide range of impression type mold applications, including castin'craft clear casting resin, easycast clear casting epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. Easymold is an easy to use, odor free, non-toxic, fda compliant - food grade, two component silicone putty.
- Color: Clear
- Brand: Environmental Technology
- ASIN: B004Y46GX8
- UPC: 033331337002
Smooth-Cast 300 Liquid Casting Plastic - Gallon Unit
Smooth-Cast 300 Liquid Casting Plastic - Gallon
Smooth Cast 300 is a liquid plastic ,ultra-low viscosity casting resin that yields castings that are bright white and virtually bubble-free. Vacuum degassing is not necessary. It offers the convenience of a one to one mix ratio (by volume). 3 minute pot life: 10 minute demold time: Mixed viscosity 80 cps: 70D shore hardness Fully cured castings are tough, durable, machinable and paintable. Read MSDS before use - Adult Supervision Required. Keep Out of the Reach of Children - for more information visit www.smooth-on.com
- Brand: Smooth-On
- ASIN: B0742MBCH3
- UPC: 751635476615
Alumilite Amazing Mold Rubber Kit, 0.77 oz.
Environmental Technology 33720 1-Pound Kit Casting' Craft Easymold Silicone Rubber
Environmental Technology 33720 1-Pound Kit Casting' Craft Easymold
Fad compliant - food grade ideal for a wide range of impression type mold applications casting resin and epoxy, wax, baking, chocolates, ice cubes, soap, plaster, air dry clay, concrete and low melt metals. For use in jewelry making including pendants, charms and earrings. 45 minute to 1 hour working time, 24 hour cure. Produces extremely fine detail from original. High heat range, up to 400 degrees Fahrenheit. No shrinkage. Self-releasing, no mold release agent required for most applications. Complete instructions and project ideas enclosed. Strong, flexible reusable molds.
- Brand: Environmental Technology
- ASIN: B003CHMZYM
- UPC: 033331337200