Nils master UR600C Cordless drill auger

Nils master UR600C Cordless drill

Nils Master UR600C auger Assembly. Since 1994 Nils Master USA, Inc. Has been importing from Finland the best ice fishing and fishing products in the world. We are proud to offer the highest quality products to our customers. Only the best is good enough.

  • Brand: NILS
  • ASIN: B00AG0ZV44

Eskimo HD07 Hand Auger with 7-Inch Dual Flat Blades

Eskimo HD07 Hand Auger with 7-Inch Dual Flat

Eskimo Hand Augers are a perfect travel companion for early or late season ice anglers. They are lightweight and cut effortlessly through the ice. Eskimo hand ice auger blades are flat and designed for long life.

  • Brand: Eskimo
  • ASIN: B00068VAS2
  • UPC: 744288440911

Strike Master Ice Augers Lazer Hand Auger, 6-Inch

Strike Master Ice Augers Lazer Hand Auger,

The simpler the tool the subtler the differences from one brand to the next. But in hand augers, oh-how measurable those differences are. the StrikeMaster Lazer converts RPMs into inches-drilled faster than the competition, every last one of them. We want you to save your back and breath. A powder coated drill reduces ice build-up while authentic Lazer Blades tunnel toward the fish. Soft rubber grips perch atop a handle that adjusts from 48 to 57 inches, accomodating various ice thicknesses and angler heights. Did we say "simple"? We meant precision."

  • Color: Lazer-Hand
  • Brand: Strike Master
  • ASIN: B0000DJLZP
  • UPC: 891000310448

Vendetta Precision Ice Auger Adapter - Stainless Steel - Strikemaster/Mora/Lazer/Eskimo

Vendetta Precision Ice Auger Adapter - Stainless Steel

New 2019 Design! Revised LONGER SHANK! We listened to your reviews and feedback! Are you tired of cranking that handle 'round and 'round shaving away ice little bits at a time? Getting nowhere fast with your prime fishing hole? Crank no longer with our innovative auger adapter! Simply install into your ice auger and chuck it up to your favorite cordless drill and let the powertool do the work. Never worry about cold-starting your gas auger again either. Drill as many holes as you want with ease. Our auger adapter comes in your choice of high strength 2024 aircraft grade aluminum, or 303 stainless steel and is made by us right here in Wisconsin. Don't let your ice fishing season slip by with that time-consuming hand auger and try one of our power drill auger adapters today! ***Clamp TIGHTLY on flats of adapter only or damage will result!

  • Brand: Vendetta Precision
  • ASIN: B074M2TGXN

Eskimo HD06 Hand Auger with 6-Inch Dual Flat Blades

Eskimo HD06 Hand Auger with 6-Inch Dual Flat

Eskimo Hand Augers are a perfect travel companion for early or late season ice anglers. They are lightweight and cut effortlessly through the ice. Eskimo hand ice auger blades are flat and designed for long life.

  • Brand: Unknown
  • ASIN: B0048H9UIO
  • UPC: 012642100062

Nils Master UR800C Convertible Hand

Nils Master UR800C Convertible

Strike King TGSKJ38-108 Tour Grade. Auger to Cordless Drill 8". Model # UR800C. Brand name Nils Master. Hand Augers. Item weighs 0.5 pounds.

  • Brand: NILS
  • ASIN: B00FH3GGMQ

Eskimo QT8N Power Ice Auger Bit with 8-Inch Quantum Blades

Eskimo QT8N Power Ice Auger Bit with 8-Inch

High speed tracking kits come equipped with our durable, ultra high molecular weight polyethylene (uhmwpe) runners, which help pull sleds easier and extend the life of the sled, especially over rough, Jagged ice terrain. All mounting hardware included.

  • Color: Red
  • Brand: Unknown
  • ASIN: B000LXEW1Y
  • UPC: 782174225174

290149 StrikeMaster Mora Hand Auger-6 in. MD-6

290149 StrikeMaster Mora Hand Auger-6 in.

The StrikeMaster Mora hand auger is 6 inches. It features high alloy carbon steel blades. It has powder coated paint to reduce ice build-up. It has soft rubber grips. There is an ergonomic designed handle system. The handle adjusts from 48 inches TP 57 inches and it weighs 6 pounds.

  • Brand: Strike Master
  • ASIN: B001UU111Q
  • UPC: 043253040003

Eskimo S33Q8 Sting Ray 33cc with 8-Inch Quantum Ice Auger

Eskimo S33Q8 Sting Ray 33cc with 8-Inch Quantum

High speed tracking kits come equipped with our durable, ultra high molecular weight polyethylene (uhmwpe) runners, which help pull sleds easier and extend the life of the sled, especially over rough, Jagged ice terrain. All mounting hardware included.

  • Color: Red
  • Brand: Eskimo
  • ASIN: B000BUKAWC
  • UPC: 012642711015

Ice Auger Cordless Drill Adapter for Ice Fishing - Fits 3/8 and 1/2 Drills

Ice Auger Cordless Drill Adapter for Ice Fishing

Body is 4 1/2 inches long and made of 300 series stainless steel, not aluminum, so it will not become bent or distorted over time. Safety Disc is made of 6061 aluminum and is 7 " diameter, which will work on 6" or smaller auger. Three flat milled sides to fit in either a 3/8 or 1/2 inch drill chuck. This adapter does not work with threaded augers. No need to bring the gas auger inside the shanty and smoke yourself out anymore. Let the cordless drill do the work not your arms. Save your back by not hauling around that heavy gas auger. The safety disc will not only save your auger from going through the ice if it the drill chuck should loosen, but there is no threat of the safety device harming the operator like a bolt or shaft safety system. No bloody or bruised knuckles!

  • Brand: Ice Eater
  • ASIN: B004C75G2O

K-DRILL 6In Auger Only

K-DRILL 6In Auger

K DRILL 6" ICE AUGER

  • Brand: K-DRILL
  • ASIN: B017S3G98I
  • UPC: 042221890589

NILS HAND ICE AUGER 4.5"

NILS HAND ICE AUGER

This Nils auger is a hand auger that cuts a 4.5" hole

  • Brand: NILS
  • ASIN: B0064BCTLC

Nimrod Ice Auger Adapter - Converts Hand Auger to Power Auger - Made in USA - #TONII - For Pin System Augers

Nimrod Ice Auger Adapter - Converts Hand Auger

Nimrod Ice Auger Adapter - Fits Mora & Lazer Strikemaster Auger & the Eskimo auger - Works Best With Nimrod SmartHandle - Just for new pin system augers, not a threaded handle - It is loose on the HT auger and is not recommended. - 8-3/4" long - 3/4" chuck where you connect auger drill - 3/8" chuck where you connect drill - Convert your hand auger into a power auger using a cordless drill! - Works with 3/8" or 1/2" cordless drill - Cuts up to 50 holes on a single battery charge - Cuts through 10" of ice in about 8 seconds - Three-sided arbor prevents spinning - Made in Michigan for Lakco - An amazing product!!! - A must for the Ice Fisherman!!! - You can use any 18 volt cordless drill (or larger 19.2 is also good), does not matter what brand, but has to be 18 volt (or larger), not 12 or 14 volt. (NOT recommended for lower than 14.4 volt drills.) - NOTE: This is for adapter only, auger & drill are not included! This is only so you know how it works! - NOTE: We have sold about 5000 of these over the past 7 years and only 3 people lost their augers. All three were when the guys put the drill in reverse; this loosens the drill bit. - **DO NOT flip from Forward to Reverse to back auger out of hole!!!** - DO NOT PUT DRILL IN REVERSE: PULL AUGER & CHUCK UP!!

  • Color: Black
  • Brand: Lakco
  • ASIN: B00PSL10PU
  • UPC: 747676000001

Ice Auger Cordless Drill Adapter for Ice Fishing - Fits 1/2 Drills

Ice Auger Cordless Drill Adapter for Ice Fishing

Body is 4 1/2 inches long and made of 300 series stainless steel, not aluminum, so it will not become bent or distorted over time. Safety Disc is made of 6061 aluminum and is 7 " diameter, which will work on 6" or smaller auger. Three flat milled sides to fit in a 1/2 inch drill chuck. This adapter does not work with threaded augers. No need to bring the gas auger inside the shanty and smoke yourself out anymore. Let the cordless drill do the work not your arms. Save your back by not hauling around that heavy gas auger. The safety disc will not only save your auger from going through the ice if it the drill chuck should loosen, but there is no threat of the safety device harming the operator like a bolt or shaft safety system. No bloody or bruised knuckles!

  • Brand: Ice Eater
  • ASIN: B006HGJAK2

K-DRILL 8 In. Ice Auger

K-DRILL 8 In. Ice

8 Inch K-Drill Ice Drill Assembly features an Easy drive connection any rechargeable drill with a 1/2'' chuck. Drive pin for electric rechargeable drills easily removed if customer wishes to drive with any 7/8'' (.875'') gas power head that has a clockwise rotation. The Lightweight Aluminum Shaft with Lightweight Cast Aluminum drive head holds offset chipper blades at the optimum cutting angle. Anti-chatter design allows for ease of re-opening old partial holes. The Durable light weight plastic flighting has a smooth plastic surface that prevents water from freezing to its surface and it floats if it ever accidentally comes out the drive chuck. The heat treated blades Cutting blades are interchangeable for re-sharpening, center tip controls the speed of cut while offset chipper blades make a balanced cut (both blades are cutting on opposite sides of the hole). Head and blade combination provides for optimum cutting rate with the minimal amount of torque transferred to the operator making break-through easy with minimal torqueing/twist.

  • Brand: K-DRILL
  • ASIN: B017S2XC3E
  • UPC: 042221890572
Similar Nils Ice Auger Results