OTC 1750A 6000 lbs. Revolver Diesel Engine Stand with Universal Adapter

OTC 1750A 6000 lbs. Revolver Diesel Engine Stand

Rotating even a 6,000 pounds diesel engine is easy; a 96:1 ratio worm and gear set does the job. The crank handle can be locked in any position.. Integral 12-ton jack raises the work to provide the swing radius needed for clearance. Two front wheels and two rear casters provide mobility. Universal adapter assembly permits use with a wide variety of mounting plates for Caterpillar, Cumillimeterins, Mack, IH, and Detroit in-line or "V" series diesel engines, as well as Allison transmissions. Includes 205061 universal engine adapter and is covered by OTC Lifetime Marathon Warranty.

  • Brand: OTC
  • ASIN: B000F5HU9E
  • UPC: 731413017506

OTC 7100 Automotive Accessories

OTC 7100 Automotive

OTC Lifting Brackets Set can be attached directly to the component for easy lifting. It will take 1/2 inch diameter bolts. It includes 1pair of lifting brackets with a total capacity of 4,000 pounds.

  • Brand: OTC
  • ASIN: B000P72CJK
  • UPC: 031113166949

OTC 5021 Automotive Accessories

OTC 5021 Automotive

OTC Universal Diesel Engine Compression Gauge Works on any diesel engine to test compression up to 1000 psi and 7000 kPa. Its features include a check valve, push button compression release, and a quick disconnect fitting on the hose end. Straight and 45 degrees hose connectors are included.

  • Brand: OTC
  • ASIN: B000OQHTB8
  • UPC: 731413009624

OTC (3054E) Noid Lite/IAC Test Kit

OTC (3054E) Noid Lite/IAC Test

The OTC 3054E is the simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles. Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine. A flashing light indicates normal pulsing voltage. Expanded set of eight specific Noid Lites covers: GM PFI, Ford TBI, Geo TBI, Bosch PFI, GM TBI, GM SCPI, and now new applications of Bosch 2 and Multec 2, plus two GM IAC testers (flat and square four connector applications) with red and green LEDs. Includes a molded plastic case and harness extension that allows for convenient remote viewing from the driver's seat.

  • Brand: OTC
  • ASIN: B0071JJYLO
  • UPC: 523161175757

OTC 6076 Diesel Compression Test Adapter for Ford

OTC 6076 Diesel Compression Test Adapter for

OTC Ford Diesel Engine Compression Test Adapter is designed for use with OTC's No. 5021 diesel engine compression gauge. This adapter is used to connect the No. 5021 gauge to a glow plug port (after the glow plug has been removed) for performing a compression test. Fits 1994-2003 Ford pickups and vans with 7.3L direct-injected turbocharged (DIT) diesel engines. Similar to Ford 303-D103. High-grade materials ensure quality performance over the lifetime of the tool. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

  • Brand: OTC
  • ASIN: B000O82560
  • UPC: 731413033452

OTC 206386 Revolver Engine Adapter Plate for I.H.C. Engine

OTC 206386 Revolver Engine Adapter Plate for I.H.C.

OTC Revolver Engine Adapter Plate for I.H.C. Engine for International Harvester engines: DT-466 DT-360 DT408 and 530 in-line 6 cylinder; DV-550 MV-404 MV-446 V304 V345 V392 4-152 4-196 4-194; 9.0 liter and T444E V8; and Ford 6.9L and 7.3L DIT. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG6W
  • UPC: 731413001802

OTC 218099 Revolver Engine Adapter Plate for Cummins C Engine

OTC 218099 Revolver Engine Adapter Plate for Cummins

OTC Revolver Engine Adapter Plate for Cummins C Engine for Cummins "C" series 8.3L in-line 6 cylinder engines. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG7Q
  • UPC: 731413020551

OTC 205059 Automotive Accessories

OTC 205059 Automotive

OTC Revolver Engine Adapter Plate for Cummins engines: All NH NTC NTE N14 855 series in-line 6 cyl; 378 series V6; 504 555 and 903 series V8; KT 1150 series in-line 6 cylinder L10. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG9O
  • UPC: 073141300179

OTC 218098 Revolver Engine Adapter Plate for Cummins B Engine

OTC 218098 Revolver Engine Adapter Plate for Cummins

OTC Revolver Engine Adapter Plate for Cummins B Engine for Cummins "B" series 5.9L in-line 6 cylinder engines. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG8U
  • UPC: 731413020544

OTC (6678) Cam Gear Holder - 2 Pack

OTC (6678) Cam Gear Holder - 2

OTC's No. 6678 Cam Gear Holders clamp between the engine block or head and the back of the cam gear to lock it in place. Use on single or dual overhead cam engines to hold valve timing during belt replacement. Excellent for diesel injection pump belt replacement. The cam gear holder's universal design is quick and easy to install. 2-pack. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

  • Brand: OTC
  • ASIN: B00C6R1N24
  • UPC: 731413562617

OTC (6679) Cam Gear Clamp and Holder Set

OTC (6679) Cam Gear Clamp and Holder

The OTC 6679 clamp between the engine block or head and the back of the gear to lock it in place. The cam gear clamp is used between two adjacent gears to lock them together and eliminate movement. Use on single, dual, or quad cam engines to hold valve timing during belt replacement. Excellent for diesel injection pump belt replacement. The cam gear holder's universal design is quick and easy to install and the cam gear clamp has a positive lock tooth design to secure all sizes of cam gears.

  • Brand: OTC
  • ASIN: B00C6R1ORI
  • UPC: 731413562761

OTC (4201) Nozlrater Nozzle-Tester Adapter Set

OTC (4201) Nozlrater Nozzle-Tester Adapter

The OTC 4201 is a universal adapter set for testing injection nozzles on the most popular automotive agricultural and construction diesel engines. The set has 17 adapters that connect to the number 4200 Nozlrater testing unit. Includes 23622— used on 1989–95 Cummins 5.9L, 1983–94 Ford 6.9L and 7.3L., and 23623— used on 1996–2000 Cummins 5.9L and Navistar 6.6L and 7.8L inside a handy metal storage box.

  • Brand: OTC
  • ASIN: B00063YWAU
  • UPC: 731413001895

OTC 217687 Revolver Engine Adapter Plate for Cat Engine

OTC 217687 Revolver Engine Adapter Plate for Cat

OTC Revolver Engine Adapter Plate for Cat Engine for Caterpillar 3114 3116 and 3176 in-line 6 cylinder and C12 engines. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG76
  • UPC: 731413020537

OTC (61405) Revolver Engine Adapter Plate

OTC (61405) Revolver Engine Adapter

The OTC 61405 is for Cummins L-10 and M11 series engines. The plate attaches to the left side of Engine for complete teardown. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG8K
  • UPC: 731413018374

OTC 205060 Revolver Engine Adapter Plate for CAT Engine

OTC 205060 Revolver Engine Adapter Plate for CAT

OTC Revolver Engine Adapter Plate for CAT Engine for Caterpillar engines: numbers 1673 1674 1693 3306 and 3406 in-line 6 cylinder; numbers 1100 3208 3408 V8 and 3406E. A universal adapter assembly is required for mounting all plates to the stand. The universal adapter plate assembly is included with 1750A Revolver Diesel Engine Stand.

  • Brand: OTC
  • ASIN: B0007LNG9Y
  • UPC: 731413019494
Similar Otc Universal Diesel Engine Results