2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers (2 four way pressure clamps)
2 Pack of 4 Way Pressure Clamps For
Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don't do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.Let's make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels. Build any length clamp with the durable plastic bars with 12 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock....
- Brand: Peachtree Woodworking Supply
- ASIN: B073QSF8JR
Set of Two (2) DAMSTOM Professional Woodworking Panel Clamps for Flat Panel Gluing -- GRAY
Set of Two (2) DAMSTOM Professional Woodworking Panel
You will get perfectly flat panels every time with the Damstom Panel Clamps if you use their easy-to-follow directions. With its two straight, parallel bars adjusted to firmly sandwich the panel, you'll completely eliminate the problem of glued panels that buckle and bow under pressure. This makes it an excellent solution for table tops, wide door panels and thick bench tops. Tool-free knobs allow you to adjust the parallel bars to clamp panels from 3/4'' thick to a massive 4-1/2'' thick, for up to a 38" long panel. Plenty of clearance for the handle makes it easy to wind the clamp closed. Constructed from steel with a powder-coated gray finish and rugged Acme thread. Set of two (2).
- Brand: Damstom
- ASIN: B07B3JX9H9
- UPC: 729798862095
Chain Link Fence Panel Clamps ~ Kennel Clamps: (8 Set) for 1-3/8" Chain Link Fence Pipe Panel Frames. for Dog kennels/Dog Runs, or Temporary Chain Link Fence. Saddle Clamps.
Chain Link Fence Panel Clamps ~ Kennel Clamps:
Chain Link Fence PANEL CLAMPS ~ KENNEL CLAMPS: 8 Sets of Dog kennel panel clamps If you are setting up temporary fencing with chain link panels or other pipe panels that have 1-3/8" pipe framesThese panel clamps are also used as "Kennel clamps" for building a chain link dog kennel (or chain link dog run)Panel clamps are used to secure to pieces of rail parallel to one anotherThey are frequently used to bolt two kennel panels together, two per panel.Also used on "baseball backstops" to secure the overhead canopies.There are many known applications that they can be used for, they are sturdy and easy to use8 Sets include Nuts and Bolts
- Brand: Jake Sales
- ASIN: B0113BD43E
- UPC: 646437233170
16pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New
16pc Butt Welding Clamps Weld Sheet Metal Auto
Description Butt Welding Clamps 16 Pc This set of butt welding clamps secures work pieces to make precision butt welds and edge-to-edge welding. The welding clamps are made of steel with zinc plating to resist rust and are simple to install or remove. A great set of clamps for any welding kit! Maintains 0.40 in. gap between panels for edge-to-edge welding Steel with zinc plating to resist rust Ideal for straight or curved panels Easy to install and remove Specifications NameButt Welding Clamps 16 Pc SKU60545 BrandChicago Electric Welding MaterialSteel Quantity16 Product Height1 in. Product Length2-3/16 in. Product Width1 in. Shipping Weight2.5 lb.
- Brand: Unknown
- ASIN: B0787XV8SX
AES Industries Mini Panel Clamp 5 Pack - Usable 1/2" Jaw Opening with 1/2" Throat Depth
Set of Three (3) DAMSTOM Professional Woodworking Panel Clamps for Flat Panel Gluing - GRAY
Set of Three (3) DAMSTOM Professional Woodworking Panel
You will get perfectly flat panels every time with the Damstom Panel Clamps if you use their easy-to-follow directions. With its two straight, parallel bars adjusted to firmly sandwich the panel, you'll completely eliminate the problem of glued panels that buckle and bow under pressure. This makes it an excellent solution for table tops, wide door panels and thick bench tops. Tool-free knobs allow you to adjust the parallel bars to clamp panels from 3/4'' thick to a massive 4-1/2'' thick, for up to a 38" long panel. Plenty of clearance for the handle makes it easy to wind the clamp closed. Constructed from steel with a powder-coated gray finish and rugged Acme thread. Set of three (3).
- Brand: Damstom
- ASIN: B07B3NC1D6
- UPC: 729798862101
POWERTEC 4-Way Pressure Clamping System | Multi-Directional Woodworking Clamp Set
POWERTEC 4-Way Pressure Clamping System | Multi-Directional Woodworking
Introducing the 4 Way Pressure Clamping System by POWERTEC.This high quality set of pressure clamps provides dimensional stability to your wood (lumber, boards, etc) – while delivering an optimal clamping action to your jointing and other woodworking needs. This pressure clamp tool is a must have for many professionals. You’ll find that your boards stay affixed and aligned, while the pressure is applied and distributed evenly in all directions – making each task easier a quicker to handle. Additionally, it features 6” non-marring jaws that will help you avoid wood bowing and other irregularities. Whether you’re doing surface work for your veneers, in the process of gluing table tops, or simply looking to get creative with a 2x4, this multi-directional woodworking clamping system comes with everything you need to complete the task at hand, including:• Pressure Clamps• Non-Marring Pressure Pads• Clamping Tails• Screws• (2x4 and other wood not included)POWERTEC is a leading manufacturer of high quality woodworking tools and accessories, panel clamp equipment, thickness planer tools, and an assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the latest innovation, technology, and product development to the industry.
- Brand: POWERTEC
- ASIN: B01N4WI2GE
- UPC: 709619857264
WoodRiver Clamping System
The WoodRiver clamping system applies equal pressure from all four directions (top, bottom, and both sides). Ideal for gluing table tops, shelving, veneer, and laminates. Attach clamps to any length 2 x 2's (a 2 x 4 ripped in half) with screws provided, set jig and turn handle to tighten (on large pieces, position every 12"-18" for maximum clamping efficiency). Clamp has plastic pressure pads and two 19-1/2" tail bars of tough plastic with 12 notches to handle a variety of stock widths. It can be used on boards up to 6" thick. Includes two clamps, two short bars, two long bars and screws. Comes with complete instructions, 2 x 4's not included. Replacement "long" and "short" notched plastic clamping bars are available separately.
- Brand: WOODRIVER
- ASIN: B0039ZGOBC
- UPC: 844788008977
Bessey BPC-H34 3/4-Inch H Style Pipe Clamp, red
Bessey BPC-H34 3/4-Inch H Style Pipe Clamp,
Stabilize and elevate your work piece with this 3/4" Bessel H-style pipe clamp. Unique foot design provides Dual-Axis stability. Long legs raise your project off the work surface so tightening is easier. Large clamping surface ensures positive grip and padded jaws protect your work from marring. Large handle provides positive pressure while the "clutch" Action grips the bar automatically. Cast jaws and handle offer durability and a smooth action spindle.
- Color: Red
- Brand: Bessey
- ASIN: B0012YNJRO
- UPC: 100058630300
Panel Clamp Gasket for Heliocol Swimming Pool Solar Panels - HC-113G -4 Pack
Panel Clamp Gasket for Heliocol Swimming Pool Solar
This is an original replacement panel clamp gasket for heliocol and sunstar solar swimming pool heating systems. The panel clamp gasket is one of four components of the panel clamp assembly used to connect heliocol panels.
- Brand: HELIOCOL
- ASIN: B01N80VDL4
SET OF (8) 2-INCH SADDLE/PANEL CLAMPS FOR DOG PEN, CHAIN LINK FENCE
FIRSTINFO Auto Body/Car Body Metal Sheet Plate Butt Joint Welding Soldering Clamp
FIRSTINFO Auto Body/Car Body Metal Sheet Plate Butt
* This item is 4 pieces in one set. Specification: 1. A simple and efficient way of ensuring a perfect welded butt joint. 2. Holds panels' edge to edge with almost no gap which allows full penetration of the weld. 3. Patented level adjustment allows accurate joining of dissimilar thicknesses of materials. 4. Level adjustment allows flat alignment of top or bottom surface of panels. 5. Level adjusts between 0 and 3mm either side.
- Color: Multi-colored
- Brand: FIRSTINFO TOOLS FIT YOUR NEEDS
- ASIN: B00YF5F9A2
- UPC: 712323806398
Vise-Grip 9AC 9-Inch Locking Panel Clamp
Vise-Grip 9AC 9-Inch Locking Panel
The IRWIN VISE-GRIP Original 9AC 9-inch Locking Panel Clamp provides quick clamping and alignment of auto body panels with a bottom jaw that slides in a straight-line motion. Just turn the screw to adjust pressure and fit work. The locking clamp stays adjusted for repetitive use. The high-grade, heat-treated alloy steel construction delivers maximum toughness and durability, while the clamp's classic trigger release is designed to provide maximum locking force.
- Color: Silver
- Brand: Lenox Tools
- ASIN: B00004SBCF
- UPC: 796299180232
POWERTEC 71181 Drawer Front Installation Clamps | Cabinet Hardware Jig | Drawer Jig For Easy and Fast Drawer Front Panel Installation
POWERTEC 71181 Drawer Front Installation Clamps | Cabinet
Introducing the Drawer Front Installer Clamps for Woodworking by POWERTEC The POWERTEC Drawer Front Installer Clamp makes for the easy and accurate installation of perfectly aligned front drawer panels. Conveniently accommodates to different sizes drawer faces and stock thicknesses for optimal versatility. Use while the drawer is Closed for Easy Accuracy CheckingThe cabinet clamps face frame holders feature a small clamp pad profile that allows you to easily install the drawer front panel while it is inside the drawer frame itself. Want to close the door to double-check your alignment? No problem, this clever device will not get in the way. NonMarring Clamp "hands" Are here to HelpTwo non-marring, high-utility clamp heads supply you the help you need to get the job done right, every time. Each drawer front installer clamp holds the panel so you don't have to, thus freeing you to do ensure that the drawer front adjustment is exactly the way you want it.Micro Adjusting is Easy & PreciseHandy adjustment screws allow for essential micro- adjusting, so you know it's right before you permanently attach the front panel and seal the deal. Saves time and hassle and insures satisfyingly flawless outcomes. A " must have" in your workshop arsenal. Enjoy perfection in your drawer making p...
- Brand: POWERTEC
- ASIN: B07SDPWX6W
- UPC: 843441101659