Pro-Tek Honda No Cut Frame Crash Protectors Sliders 2000 2001 CBR929RR CBR-929RR CBR 929RR and 2002 2003 Honda CBR954RR CBR-954RR CBF 954RR No Cut Frame Crash Protectors Sliders

Pro-Tek Honda No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses a 10mm x 90mm steel bolt. The left side puck measures 102mm (4") in length and uses a 10mm x 80mm steel bolt. Both bolts are countersunk into the pucks.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications2000-2001 Honda CBR-929RR/929RE2002-2003 Honda CBR-954RRThe frame sliders are to be mounted to your upper engine mount bolts. Refer...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NQPBRC7

Pro-Tek Yamaha No Cut Frame Crash Protectors Sliders 1994 1995 1996 1997 1998 YZF-750R YZF750R YZF 750 R and 1997 YZF-1000R YZF1000R YZF 1000 R Frame Crash Protectors Sliders

Pro-Tek Yamaha No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses a 10mm x 80mm steel bolt. The left side puck measures 82mm (3.25") in length and uses a 10mm x 70mm steel bolt. Both bolts are countersunk into the pucks.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1994-1998 Yamaha YZF-750R1997 Yamaha YZF-1000RThe frame sliders are to be mounted to the rearmost engine mounts. Refer to your se...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NQMVNKM

Pro-Tek Yamaha No Cut Frame Crash Protectors Sliders 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 YZF-600R YZF600R YZF 600 R Thundercat Frame Crash Protectors Sliders

Pro-Tek Yamaha No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses a 10mm x 80mm steel bolt. The left side puck measures 82mm (3.25") in length and uses a 10mm x 70mm steel bolt. Both bolts are countersunk into the pucks.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1994-2007 Yamaha YZF-600R ThundercatThe frame sliders are to be mounted to the rearmost engine mounts. Refer to your service manu...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NQMM9H1

Pro-Tek Honda Frame Crash Protectors Sliders 2007 2008 CBR-600RR CBR600RR CBR 600 RR

Pro-Tek Honda Frame Crash Protectors Sliders 2007 2008

This Pro-tek frame slider kit is made from acetal plastic for strength and durability. It requires modifications to both fairings. It comes with all steel bolts, mounting hardware and complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far causing a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 89mm (3.5") in length. The left side puck measures 102mm (4") in length.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications2007-2008 Honda CBR-600RRThe frame sliders are mounted to the upper engine mounts. The fairings require modification during installation. This is best done by removing the fairing. Locate the engine mount bolt & replace with the supplied bolt. If h...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07P5ZZ741

Pro-Tek Honda Frame Crash Protectors Sliders 1991 1992 1993 1994 CBR-600F2 CBR600F2 CBR 600 F2 and 1995 1996 1997 1998 CBR-600F3 CBR600F3 CBR 600 F3

Pro-Tek Honda Frame Crash Protectors Sliders 1991 1992

This Pro-tek frame slider kit is made from acetal plastic for strength and durability. It requires modifications to both fairings. It comes with all steel bolts, mounting hardware and complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far causing a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses the longer 10mm x 100mm bolt. The left side puck measures 76mm (3") in length and uses the shorter 10mm x 90mm bolt.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1991-1994 Honda CBR-600F21995-1998 Honda CBR-600F3The sliders are designed to fit the upper engine mounts of your motorcycle. This kit requires a hole to be cut on both sides....

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07P974WBK

Pro-Tek Honda Frame Crash Protectors Sliders 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 CBR-1100XX CBR1100XX CBR 1100 XX

Pro-Tek Honda Frame Crash Protectors Sliders 1997 1998

This Pro-tek frame slider kit is made from acetal plastic for strength and durability. It requires modifications to both fairings. It comes with all steel bolts, mounting hardware and complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far causing a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.Both pucks measure 102mm (4") in length and use 10mm x 90mm countersunk bolts.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1997-2007 Honda CBR-1100XXThe frame sliders are mounted to the upper engine mounts. The fairings require modification during installation. This is best done by removing the fairing. Locate the engine mount bolt & replace with the supplied bolt. If heat shield foam is not...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07PHL3HWM

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders 1997 1998 1999 2000 2001 TL1000S TL-1000S TL 1000 S

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 76mm (3") in length and uses a 10mm x 120mm steel bolt. The left side puck measures 76mm (3") in length and uses a 10mm x 110mm steel bolt. Both bolts are countersunk into the pucks.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1997-2001 Suzuki TL-1000S. DOES NOT FIT TL-1000RThe frame sliders are to be mounted to your upper engine mount bolts. Refer to you...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NQNDJBR

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders 2006 2007 2008 2009 2010 GSXR600 GSXR-600 GSXR 600 and 2006 2007 2008 2009 2010 GSXR750 GSXR-750 GSXR 750

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts, mounting hardware and complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims, steel bolts and one relocation bracket that clear the fairings by an inch.You do not want a slider to stick out too far causing a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 82mm (3.25") in length and uses the 10mm x 80mm bolt. The left side puck measures 95mm (3.75") in length and uses the 10mm x 35mm bolt to attach to the relocation bracket. Both bolts are countersunk into the puck.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications2006-2010 Suzuki GSXR-6002006-2010 Suzuki GSXR-750Fairing removal is required on left clutch side of bike. Remove only o...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NS4R8T7

Pro-Tek Yamaha No Cut Clutch Frame Crash Protector Slider 1998 1999 2000 2001 2002 2003 2004 2005 2006 YZF-R1 YZFR1 YZF R1 Clutch Frame Crash Protector Slider

Pro-Tek Yamaha No Cut Clutch Frame Crash Protector

This Pro-tek no cut clutch crash slider kit is made from acetal plastic for strength and durability. It comes with one plastic puck and one swing arm pivot shaft replacement threaded insert nut along with complete instructions needed for installation.This puck will clear the clutch on the right side by a good inch. This set is not a frame slider kit that protects both sides of the bike. There are frame slider kits also available for that.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.This right side puck measures 121mm (4.75") in length. This clutch slider is brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1998-2006 Yamaha YZF-R1.The clutch protector is to be mounted to the swing arm pivot shaft. Remove the stock nut and replace with the threaded nut supplie...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NQN413D

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders 1997 1998 1999 2000 GSXR600 GSXR-600 GSXR 600, 1996 1997 1998 1999 GSXR750 GSXR-750 GSXR 750 and 2003 2004 GSXR1000 GSXR-1000 GSXR 1000

Pro-Tek Suzuki No Cut Frame Crash Protectors Sliders

This Pro-tek no cut frame slider kit is made from acetal plastic for strength and durability. It comes with all steel bolts and mounting hardware along with complete instructions needed for installation.The kit contains two acetal pucks with aluminum shims and steel bolts that clear the fairings by an inch.You do not want a slider to stick out too far or it will cause a bike to flip in a crash by snagging on the ground. You want the puck to either touch down and start to grind off and not catch on anything or if hit hard enough or direct enough to shatter and absorb the initial crash energy. If the slider shatters, grinds off or bends, it did it's job in absorbing the crash energy. You don't want it transferring the energy to other parts of the bike causing more costly damage.The right side puck measures 82mm (3.25") in length and the left side puck measures 102mm (4") in length. Both take a 10mm x 80mm steel bolt that is countersunk into the puck.These frame sliders are brand new in original packaging manufactured in the US from Pro-tek, a leading manufacturer in the motorcycle industry now for 25 years.Applications1997-2000 Suzuki GSXR-6001996-1999 Suzuki GSXR-7502003-2004 Suzuki GSXR-1000The frame sliders are to be mounted to your upper engine mounts. Refer to your service man...

  • Color: Black
  • Brand: Pro Tek
  • ASIN: B07NPW1NRM
Similar Protek Frame Sliders Results